80 results found for “hexa”

"Introducing the first HEXA GEAR from new designer LAS91214! An interceptor HEXA GEAR that can transform between three forms, humanoid, vehicle and flying! By removing the outer armor, the unit can also be used as a sleek custom base model. In addition to the series' renowned customizability, VELOCE also boasts a sturdy, stylish design that can achieve dynamic poses! Model Specifications: - The unit has a height of 210mm (including the blade antenna) and has a total of 106 points of articulation that allows it to transform. - The unit can transform from its main humanoid form to vehicle mode, suitable for high-speed movement on land, then to a flying interceptor mode for disposing of threats in the sky. - The cockpit can open and close to hold a Governor (sold separately). The seat has a 3mm joint for placing a Governor. The base can also be slid to support Governors of various sizes. *Note that not all Governors are compatible. - The kit includes support parts that allow each form to be displayed more securely. - The model can be displayed in all three forms using the two 5mm joints for connecting a flying base. One is for the humanoid form and the other is for its transformations. - The wrist joints feature a new design that allows for a wider range of motion. The kit includes three hand parts for both the left and right hands: Closed, open, and gun-holding. - The included rifle has a rotatable grip that allows it to be held in various positions. It can also be attached to various parts of the unit via two HEXA G-R.A.M joints on the receiver. - Hidden within the feet are retractable headlights that can be opened in vehicle mode. - The taillights on the back of the unit come in clear orange and clear red. - Due to its full-body HEXA G-R.A.M System, the model can be combined with existing HEXA GEAR to construct Mecha of various shapes. Included Items: - 1 x Main Model - 2 x Rifle - 3 x Types of Hand Parts (Left and Right Each) Set - 2 x Optional Thigh Joint - 1 x Vehicle Mode Support Parts Set- 1 x Interceptor Mode Support Parts Set- 1 x Archive Card

"A special variant of the interceptor HEXA GEAR VELOCE has emerged, known for its ability to transform between three forms: humanoid, vehicle, and interceptor. This version features custom parts that enable it to engage in close-quarters combat while airborne in humanoid mode. From twin swords to twin blades, its adaptable fighting style lets it switch seamlessly to slice through enemies with ease!Model Specifications:- The unit has a height of 240mm (including the blade antenna) and 110 points of articulation to allow it to transform.- The unit can transform from its main humanoid form to a vehicle mode suitable for high-speed movement on land, then to a flying interceptor mode for disposing of threats in the sky.- The new weapons, super-large special tactical twin blades, feature adjustable blade lengths that can be customized by sliding the blade sections. The two blades can also be combined into a double-edged sword for added versatility. With the use of mounts, they can also be suspended from the unit in the non-humanoid modes.- The cockpit can open and close, allowing a separately sold Governor unit to be placed inside. The seat has a 3mm joint for attaching the Governor. The base can also be slid to support Governors of various sizes.*Note that not all Governors are compatible.- The kit includes support parts that allow each form to be displayed more securely.- The model can be displayed in all three forms using the two 5mm joints for connecting a flying base. One is for the humanoid form and the other is for its transformations.- The wrist joints feature a new design that allows for a wider range of motion. The kit includes three hand parts for both the left and right hands: Closed, open, and gun-holding.- The included rifle has a rotatable grip that allows it to be held in various positions. It can also be attached to various parts of the unit via two HEXA G-R.A.M joints on the receiver.- Hidden within the feet are retractable headlights that can be opened when in vehicle mode.- The taillights on the back of the unit come in clear orange and clear red.- Due to its full-body HEXA G-R.A.M System, the model can be combined with existing HEXA GEAR to construct mecha of various shapes.Included Items:- 1 x Main Model - 1 x Super-Large Special Tactical Twin Blades ""Kunpu"" and ""Reppu"" - 2 x Plasma Assault Rifle - 1 x 3 Types of Hand Parts (Left and Right Each) - 2 x Optional Thigh Joints - 1 x Vehicle Mode Support Parts - 1 x Interceptor Mode Support Parts - 2 x Tactical Twin Blades Mount Parts - 1 x Archive Card

"Product Specifications:- The third product in the "Alternative" model kit series is now here. This line aims to create models that are both compact in size, and easy to assemble. Models of this new line can be assembled in steps similar to that of the standard Governor and is easy to build for model kit beginners.- Despite the model size being a total of 74mm, there are 29 joints that can be moved.- This model includes ball-jointed parts between the head and neck and other areas for natural posing.- The abdomen area was designed with multiple joints to allow for more flexibility.- The joint units included are 3mm in size, making this model customizable with products from the HEXA GEAR, Frame Arms, Frame Arms Girl, Megami Device, and Modeling Support Goods series.- The included weapon, Orthros, is configured as a 3mm joint and can be exchanged with the forearm part for ALTERNATIVE HUMANOID JESTER and other Governor models.*The attachment may not fit on select models due to its design.- The neck, shoulder, and hip joints are made in the standard Governor design and can be interchanged with the same parts on other Governor models.*Some joints and parts may need to be adjusted in order to attach on select models.- This model includes standard Governor series shoulder joints and 3mm HEXA G-R.A.M ball type joints, which are interchangeable upon assembly. With the 3mm HEXA G-R.A.M ball type joints, you can attach 3mm compatible weapons and accessories to the shoulder part. The 3mm joints are also compatible with other models in the Governor series.*Select products are excluded.- The model is equipped with a connector on the back piece, which allows you to attach a "HEXA G-R.A.M System" and the mount parts for the G-R.A.M Cutters.Included Items:- 1 x PARA-PAWN JESTER Model - 1 x Orthros - 2 x 3mm Interchangeable Shoulder Joint Parts - 1 x Left and Right Wrist Parts (Closed, Open, Weapon Holding)- 1 x PVC HEXA G-R.A.M.

"Combat preparation complete. Start your engines. A new reinforced humanoid HEXA GEAR joins the fray in the BULKARM ? series-the successor to the hugely popular BULKARM a series. Specifically designed for close-quarters combat, the unit is nearly fully clad in new armor and wields a large melee weapon. Charge into battle with the heavily armored and armed WOLFZERKER, which also features the stylish form of a base humanoid HEXA GEAR. Model Specifications: - The large horns on the left and right of the head use 3mm connection points and can move, making them great for customizations. The visor can also open and close. - Includes four hand parts for both the left and right hands: Fists, open hands, gun-holding, and sword-holding. - The large melee weapon can be transformed from a mace to a sword. By combining other parts, it can also be transformed into a giant machete-like weapon. - The shield can be held using a grip or it can be attached directly to the forearms using HEXA G-R.A.M and 3mm joints, which frees up the unit's hands. In addition, there is a deployment feature for the built-in attack system.- This kit includes joints for FLYING BASE NEO, which is sold separately. - Some large Governors may have trouble fitting in the enclosed cockpit. - The color scheme for this kit is dark green, light gray, gray, gunmetal, silver, clear red and clear orange for a total of seven colors. Included Items: - 1 x Main Model - 4 x Types of Hand Parts (Left and Right) ×1 Set Each - 1 x Large Melee Weapon - 1 x Large Hand Armor - 1 x FLYING BASE NEO Joint Part - 1 x Archive Card

"STEELRAIN is a 2.5-generation variable HEXA GEAR with a rotary-wing aircraft configuration.Driven by the immense value of HEXA G-R.A.M and the crystalline reactors that triggered prolonged corporate warfare, humanity continued producing HEXA G-R.A.M in pursuit of profit-willfully ignoring the warnings of environmental control AI. As the resulting contamination of the soil worsened, the world's largest military-industrial complex, MSG, recognized the urgent need to end the conflict. As such, they began developing a new HEXA GEAR based on a new concept that would be intended to shift the tide of war. The completed unit came in two similar looking but vastly different variants. The early type was a rotary-wing aircraft-style HEXA GEAR with its power source replaced by a HEXA G-R.A.M-functionally similar to first-generation models. The later type featured a system that enabled transformation into a humanoid form.While the early type lacked any particularly unique features aside from being an increasingly rare aircraft-type, it earned high marks for reliability and ground attack capability thanks to its standard loadout of dual 20mm Gatling guns and a broad array of ballistic weapons. This, combined with the inherent advantage of aerial strikes, gave it a decisive edge over most second-generation HEXA GEAR units, which were primarily vehicle or biped-based. The later type further expanded its versatility. It incorporated a BMI control system and manipulator arms, allowing for rapid weapon swapping and supply handling. Its form-switching mechanism also enabled it to engage effectively in CQC on the ground. These features earned it classification as a 2.5-generation HEXA GEAR. However, its production cost ballooned to the equivalent of several BULKARMa units, making it one of the most expensive machines of its generation. Operationally, its fragile airframe required constant maintenance, and its high ammunition consumption demanded a steady supply chain-necessitating support from advanced ground crews, far beyond what typical Governors could handle. Its high performance also came with an extreme energy demand. Even just powering the main rotor required a massive amount of HEXA G-R.A.M-several times more than most other second-generation units. This was the price paid for its ability to transport heavy cargo, including other HEXA GEAR, but was especially burdensome in the later type, which had additional weight from its form-switching mechanism. As a result, some units opted for the earlier type instead, prioritizing efficiency and sustainability over versatility. Despite its drawbacks, the deployment of STEELRAIN units consistently delivered decisive results on the battlefield and their performance has been judged more than worth the high cost. However, the enormous strain they placed on resources were unbearable in the end-even for the mighty MSG military-industrial complex, which led to it becoming the butt of a joke: ""STEELRAIN might tear through enemy lines like a storm, but once it's back at base, it's the one left out in the rain."" Nevertheless, the STEELRAIN is still remembered as a HEXA GEAR that struck fear into the hearts of most enemies at the time, especially for those who faced the STEELRAIN units back then. The "rain of steel" appeared in the skies and silenced every single object crawling on the ground with a rainstorm of bullets. ""Unidentified forces detected within MSG-controlled territory. Commencing elimination protocol.""Weapons: - 20mm Gatling Cannon - Anti-Aircraft Missile - Rocket Bullet Pod - Anti-Personnel Machine Gun- Iron FistModel Specifications: - This attack helicopter can be converted from "Vehicle Mode" into "Humanoid Mode". - The closed cockpit can be opened and closed, allowing a separately sold Governor unit to be placed inside. - The seat-unit inside the cockpit has a "reclining" and "sliding" feature to adjust to the size of the models being placed inside. - This highly detailed cockpit has two types of adjustable levers and adjustable foot pedals installed so that users can fully enjoy arranging the outstanding Governors embarking/disembarking the helicopter. - The rotating propellers can be freely rotated and the blades folded. - The "armored windbreaker" includes the two types: the internal head unit "back model" and the transparent canopy "front model" for users to select from. - The included "20mm Gatling Gun" can be taken apart and used separately similar to the Heavy Weapon Units. Also, it is compatible with the M.S.G Belt Links to enhance the overall firepower. - The included "air-to-surface missiles" can each be taken separately from the pylon. Also, the pylon can be expanded and missiles aligned.- By using the included attachments on the main unit and the HEXA-G.R.A.M. system, the included "rocket launcher" can be freely disassembled and expanded. It can also be used by pairing with the attachments that are used to raise the level of freedom for this model kit. -

Combat preparation complete. Start your engines. The very compatible SIEG SPRINGER and IGNITE SPARTAN set have joined the lineup as a combined kit! Unique to the HEXA GEAR series, this set allows users to enjoy the Governor and HEXA GEAR together. Also, the set includes a newly sculpted head for more mix and matching fun! Model Specifications: IGNITE SPARTAN?BLAUREGEN? - This is an option kit of IGNITE SPARTAN that includes newly designed parts. - This kit includes three newly sculpted head parts that users can choose from. - This kit includes durable leg parts with pivot joints that make it very compatible with large weapons. - The Universal Arms on the back have eight points of articulation on each arm, allowing for a wide range of poses. - The unmissable giant lance, the Colossal Lance, can fold in half and can be used like the Pile Bunker with the extendable base. - Use the 3mm shield mount attachment on the forearm to attach a variety of parts. - The four colors used in this kit are ice silver, dark blue, dark gray, and dark silver. SIEG SPRINGER ?BLAUREGEN? - Three types of horns are included, allowing users to customize the newly sculpted heads. The jaw can also open and close. - The ankle parts of the forelegs are newly sculpted, allowing users to enjoy different details. - The details of the prosthetic muscles have been carefully sculpted, resulting in a more organic silhouette compared to other third-generation HEXA GEAR. - By swapping out the head unit and step unit, the Governor can be mounted in front like a Centaur. - As the tail unit can be adjusted flexibly. Attach the included effect parts to transform the model into Sprinter Mode. - The color scheme for this kit is ice silver, gunmetal, gray, clear red, and clear blue. Included Items: IGNITE SPARTAN ?BLAUREGEN? - IGNITE SPARTAN Body ×1 Set - Head A ×1 - Head B ×1 - Head C ×1 - Hand Parts 3 types ×1 Set (Left and Right) - Colossal Lance ×1 - Round Shield ×1 - Universal Arm ×1 - Shield Mount Attachment ×2 - PVC HEXA G-R.A.M. ×1 SIEG SPRINGER ?BLAUREGEN? - SIEG SPRINGER Body ×1 Set - Laser Horn ×1 - Long Horn (Left and Right) ×1 - Curved Horn (Left and Right) ×1 - Step Unit ×1 - Acceleration Effect Parts ×2 - Foreleg Customization Parts (Left and Right) ×1 - 3mm Connection Joints ×2"

"Model Information:EX ARMOR TYPE: MONOCEROS. This new Armor Type was based on its namesake, the one-horned mythical creature known as the monoceros, or unicorn, that appears in the emblem of the Liberty Alliance.Unlike the universal Armor Type designs that prioritize life support capabilities, MONOCEROS was developed for more offensive purposes. As many of its features are dependent on the user's own capabilities, it was designed under the basic condition that it be used by Hakua Riken's super soldiers from their research project to develop a stronger human body. In order to stand against threats to the Liberty Alliance such as the ZOANTHROPUS-LÖWE and PARA-PAWN EXPANDER, the super soldiers' physical strength and senses are boosted. However, while being freed of dependence on machinery, their existence as the strongest fighters amongst the entire human race comes at the price of their humanity. There is one recorded example of a soldier equipping a MONOCEROS and engaging with an EXPANDER. Although only for a short time, the soldier was able to overpower the EXPANDER in an unprecedented showing of strength, earning that soldier the special title of "Byakurinkaku.""Weapons:- Mega Charged Tactical Sword (Laser Blade)- 2 x Lightweight Blade ×2- Limb Expansions- Iron NailsModel Specifications:- This model is 93mm in size and has over 30 points of articulation.- Materials used include ABS, POM hand parts, back HEXA G-R.A.M., creating a wide range of articulation.- The included katana can be placed either in the model's hands or mounted on the limb expansion on its back.- Two limb extension manipulators are included: one for weapons and another for a centaur form. Change the attachment point from the back to the waist for the centaur form.- The Mega Charged Tactical Sword can be attached to the side armor using the special mount. The weapon can also be attached to other Governors and Hexa Gear using the versatile mount parts on their 3mm connection points.- The Lightweight Blades can be attached to the side armor using the 2mm connection joints on the sides. They can also be attached to other Governors and Hexa Gear using the versatile mount parts on their 3mm connection points.- There is a Connector on the back backpack by default to freely attach various parts.- Certain parts such as the head camera, stomach parts, and leg parts come pre-painted.Included Items:- 1 x Governor EX ARMORE TYPE: MONOCEROS Model - 4 Types of Hand Parts (Holding Katana, Standard Weapon Holding, Gripping, Open) Left and Right Each Set- 1 x Limb Expansion Manipulator (Weapon Holding, For Centaur Form) Left and Right Each Set- 1 x Special Mount Part (2mm Connection Joint for Mega Charged Tactical Sword) - 1 x Versatile Mount Part A (3mm Connection Joint for Mega Charged Tactical Sword) - 2 x Versatile Mount Part A (3mm Connection Joint for Lightweight Blade) - 1 x Archive Card - 1 x PVC HEXA G-R.A.M

"Combat preparation complete. Start your engines.Model Information:ABYSS CRAWLER is a third-gen HEXA GEAR developed by the Liberty Alliance.It was developed to explore and control blocked terrain such as culverts. Unlike other third-gen HEXA GEAR, it has two Zoatex modes and is characterized by its continuous use of Zoatex.At the beginning of the war, cities were raided by unmanned HEXA GEAR called HIDESTORMs. Further investigations uncovered numerous ginormous underground tunnels and facilities from the past that were used to carry out these attacks. As such, the Liberty Alliance urgently required a full-scale survey. However, all information about the geological patterns of these underground structures barring simple outlines, was lost, and to make matters worse, the areas had already fallen into enemy hands, with MSG Valiant Force HEXA GEARS and droids roaming the tunnels.Hidestorms, with their capabilities in electronic warfare thanks to their VIC Blades and other weapons, greatly threatened the Liberty Alliance's coordination from underground by exposing communication lines, repeaters, and power lines that connected the cities. Liberty Alliance realized the need to take back the underground tunnels and hastily developed a HEXA GEAR unit with the express purpose of taking on the task.In developing the unit, the wreckage of the destroyed Hidestorm was recovered and its frame was repurposed and reused. However, as there was little prospect of reproducing the capabilities of the VIC Blade, or controlling or disabling it, the next best countermeasure was taken. The result was the creation of the Invasion Counter Shield, commonly known as ICS, equipped on the left arm of every unit. Due to a chronic shortage of parts, only a small number of these units were produced and subsequently sent into the darkness of the underground tunnels in squads. There were countless heavily contaminated underground areas due to the use of crystalline reactors categorized as Level 6 - Abyss, where even the worst of areas of the surface could hardly hold a candle to them. Abyss Crawlers waded through the sludge and grime, sometimes engaging with Hidestorms, small droids, and other unseen battles.Weapons:- ICS (Invasion Counter Shield)- Biting Scissors- Flame Thrower- Blast Recon- Head AnchorModel Specifications: - The model and armor parts are of a black coloration similar to LORD IMPULSE and BULKARMß "LUMBERJACK" making it easy to assemble without painting.- The model system can convert between "Formation 1" which emphasizes combat, and "Formation 2," which emphasizes mobility.- The effect parts for the ICS equipped to the Biting Scissors on the left arm are detachable.- The ICS effect parts are made of clear orange plastic, giving the model a unique and realistic appearance.- The Biting Scissors on the left arm can be opened and closed to create a variety of battle poses.- The secondary "Head Anchor" can be displayed in a variety of configurations.- The roll bars on the skid units on the legs can be opened and closed.- A separately sold Governor unit can be boarded onto the cockpit.Included Items: - Head Anchor Effect Part ×1- Wire ×1- Biting Scissors ICS Effect Part ×1*The biting scissors effect part can be placed on either the left or right arm.- Archive Card ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"This 14th HEXA GEAR booster pack features highly customizable vehicle tracks. Four sets of tracks from the M.S.G Wild Crawler kit are included. They come in the dark green coloring used across the HEXA GEAR series to make them compatible with a wide range of units. The tracks can be used in many ways, including customization for large artillery HEXA GEAR Blockade Ivy and BULKARM a Jungle Type. Product Specifications - The four-pack of M.S.G Wild Crawler track units can be assembled together for a total length of approx. 140mm. - The frames are equipped with the HEXA G-R.A.M System, making it possible to create tracks measuring approx. 265mm in length by connecting two booster packs. - By connecting multiple sets, the frames can, in theory, be extended indefinitely. The frames themselves can also be used for various purposes as well, including expanding units and as weapon platforms. - The tracks are comprised of a combination of individual parts and are extremely flexible and can be adjusted in length. - The pack also includes spare track parts, so long, sagging tracks, such as those on tanks, can be recreated. - The track wheels have a built-in suspension feature that uses metal springs and allows for the expression of the tracks rising or falling under the weight of the vehicle. Included Items:- Tracks ×4 Sets - Extra Tracks ×16 - Frame Part A ×4 - Frame Part B ×4- Starter Wheel ×4 - Guiding Wheel ×4 - Roller Units ×8 - Supporting Rollers ×16 - Universal Long HEXA G-R.A.M ×4 - Universal Short HEXA G-R.A.M ×24 - Joint Parts ×4"

"Combat preparation complete. Start your engines. Introducing an all-in-one HEXA GEAR kit! Created by our new designer, LAS91214, the VT1 features a compact body that stands at 120mm tall and can transform from a biped into a large two-wheeled vehicle without the need to swap any parts. The included Governor is a Warmage type that is popular for its Sci-Fi military style with a newly designed head. Model Specifications: - This item is a set kit that includes both a HEXA GEAR unit that can transform from a humanoid mode into a large two-wheeled vehicle mode and a Governor. The HEXA GEAR unit stands at 120mm tall in humanoid mode and is fully articulated for flexible movement. The unit becomes a full length of 166mm in its two-wheeled vehicle mode. - The model can be parked in vehicle mode by deploying the landing gear. - Pilots that board onto HEXA GEAR are called Governors. The one included, despite its small size standing at just 76mm tall, the body boasts 28 points of articulation and can be displayed in various poses. - The unit has a cockpit that can open and close to board a Governor inside and can be transformed without having to remove the Governor each time. - The hexagonal connection points are part of the HEXA G-R.A.M System, which is a feature of the HEXA GEAR series. It can be used to combine the kit with existing HEXA GEAR to make original units. - As the sensors are made of clear parts, a model faithful to the concept art can be assembled right out of the box. - The kit includes a fixed submachine gun and a karambit knife to equip onto VT1. - The models are sculpted in the popular dark green that is used for many other HEXA GEAR units, making it easy to combine with other existing models without additional painting. Included Items: - 1 x VT1 Model - 1 x Submachine Gun - 1 x Karambit Knife - 1 x Governor

"Model Specifications:- The second in line for the "Alternative" series is now here. This line aims to create models that are both compact in size, and easy to assemble. Models of this new line can be assembled in steps similar to that of the standard Governor and is easy to build for model kit beginners.- The joint units for each part of the frame are equipped with the HEXA G-R.A.M joints and the 3mm joints, making it easy to change out parts and customize your unit with other Frame Arms Girl, Megami Device, and Modeling Support Goods series models.- The included Governor helmet type head is interchangeable with heads from other separately sold Governor models.- This model comes in dark green, gunmetal, and black. Dark green and gunmetal are the same color as previously released HEXA GEAR BOOSTER PACK 003 FOREST BUGGY.Included Parts:- 1 x CROSS RAIDER Model - 1 x Governor Helmet Type Head (This item is a reproduction.)

"Virginia Earthcline, the heroine of the story and head of Earthcline Biomechanics, who developed the third-generation ZOATEX HEXA GEAR, has finally received her own model using all of Kotobukiya's experience and technology in the 1/24th scale! The kit includes two highly articulated bodies, one in uniform and one in a test suit.Model Specifications: - Uniform Body: approx. 70mm tall and features 27 points of articulation. - Test Suit Body: approx. 70mm tall and features 29 points of articulation. - Includes three heads and three sets of eye decals that are looking forward, looking left, and looking right. - The wrists use 2mm ball joints that make hand poses more expressive. - The included tablet can be held using the dedicated hand part. - The kit includes a dedicated mini flying base attachment, which allows for stable display when used. - A sitting waist part is included, meaning that scenes such as the Operator riding a HEXA GEAR or sitting on a desk/chair included in HEXA GEAR BLOCK BASE 01 DX HEAD QUARTERS can be recreated. - The hair on the test suit body head is articulated, allowing for more dynamic posing. In addition, an extra part that can be attached to the waist to serve as a base for customizations is included. Included Items: - 1 x Uniform Model - 1 x Test Suit Model - 1 x Plain Head - 1 x Beret Head - 1 x Headset Head - 1 x Eye Decals Sheet - 1 x Test Suit Waist Attachment Part - 1 x Sitting Skirt Part - 1 x Tablet - 1 x Uniform Body PVC Hand Parts for Tablet - 1 x 6 Types of Uniform Body PVC Hand Parts (Left and Right Each) - 1 x Test Suit Body PVC Hand Parts for Tablet - 1 x 6 Types of Test Suit Body PVC Hand Parts (Left and Right Each) - 2 x Mini Flying Base Attachment

Model Specifications:- The second in line for the "Alternative" series is now here. This line aims to create models that are both compact in size, and easy to assemble. Models of this new line can be assembled in steps similar to that of the standard Governor and is easy to build for model kit beginners.- The joint units for each part of the frame are equipped with the 3mm HEXA G-R.A.M joints and the 3mm joints, making it easy to change out parts and customize your unit with other Frame Arms Girl, Megami Device, and Modeling Support Goods series models.- The included Governor helmet type head is interchangeable with heads from other separately sold Governor models.- This model comes in desert yellow, gunmetal, and black. Desert yellow and gunmetal are the same color as previously released HEXA GEAR BOOSTER PACK 003 DESERT BUGGY.Included Parts:- 1 x CROSS RAIDER Model - 1 x Governor Helmet Type Head (This item is a reproduction.)

"Model Information: The Bulkarm ß is a second-generation HEXA GEAR that was modified from the ""Type a,"" which was regarded as a masterpiece of engineering but faced several issues when put into actual operation. As with the Type a, it was developed and manufactured by the military-industrial complex MSG. The most notable characteristics of the external features of this model are found in the legs, which are equipped with mobility aids that provide it with significantly improved cruising speed over the Type a. This design was implemented to improve on one of the largest shortfalls of the Bulk Arm series, particularly the Type a, which used high-durability armor that sacrificed mobility, making it difficult to coordinate with other land units such as combat vehicles.The helm was also changed from the Type a to better fit the requirements of this high-speed update. A more versatile model was utilized that prioritizes maneuverability with sensors specifically made for medium to close-range combat.In line with the concept of improved speed, the standard model as shipped from the manufacturer features the minimal armament of only a submachine gun and a heat knife.Another difference from the Type a is the expanded range of motion in the arm frames, which allows for a greater range of tactical maneuvers in close-quarters combat. The ends of the arms also continue to use the same iron fists featured in the Type a, giving the unit greater striking force in close-quarters combat. When combined with the hover units, a punch delivered at high speeds is known to be particularly devastating.As Governors will customize their units based on the mission, terrain, and battle conditions in which they are deployed, it is rare to come across a standard spec Bulkarm ß in battle.Some equip firearms taken from enemy units, while others head into battle with fortified armor and CQC weapons. Many of the weapons distributed by the developer MSG at the time were meant as enhancements for units, resulting in units having a near-limitless number of possible customizations. Governors that preferred to use the ß machines would choose light to medium weight armory and even remove armor to make the most of the machine's agility. However, there were of course exceptions on each battlefield taking their financial situations or Governor's preferences, creating machines that deviate from the base concept. There was a case where the machine was equipped with a large firearm for suppressive force. As a result, the machine's leg units and had to be changed to crawler units suitable for carrying weight. Despite abandoning the machine's original concept, it did its part in its given situation. Weapons:- Sub Machine Gun - Heat Knife - Iron Fist - Hover Unit Model Specifications: - The visor that protects the head sensor can be adjusted. - The closed cockpit can be opened and closed, allowing a separately sold Governor unit to be placed inside. *Some parts may need to be removed for certain Governors to fit due to the construction of the model. - The wrist frames use the same universal joint as BULKARM ß "LUMBERJACK" which boasts a wider range of movement than the Bulkarm Alpha model for creating more variety of action poses. - The hover units on the model's ankles can be detached and reconfigured using included parts for use as a hovercraft for Governor models. The fans and rudders on the hover units are also articulated. - Besides the machine gun magazine being removable, specific details of the ammunition have also been recreated in clear detail. The magazine can also be attached to either side of the machine gun. - The Heat Knife is designed to attach to HEXA G-R.A.M. parts and can be connected to each 3mm connecting joint on this model by using the included HEXA G-R.A.M. poly cap and 3mm joints. - Users can select from the Bull Armor optional parts to attach to the legs to create this model as a heavy-armor type. - The color of the model was designed to coordinate with the colors of other models such as HEXA GEAR Booster Pack 003 (Forest Buggy) Gigantic Arms Wild Crawler. ?Clear parts are used for BULKARM ß's sensor on its abdomen. - This model can be assembled with BULKARM a's two heads using the included optional parts.Included items: - BULKARM ß Model ×1 - Machine Gun ×1 - Heat Knife ×1 - 3mm Joint ×1 - HEXA G-R.A.M. Poly Cap ×1 - Bull Armor ×2 - Hovercraft Handle ×2 Sets - Hovercraft Footrest ×2 Sets - Bulkarm a Head A ×1 - Bulkarm a Head B ×1 - Archive Card ×1"

"Combat preparation complete. Start your engines. BOOSTER PACK No. 15 is a set of enhancement parts for BULKARM ? JACKAL. Combining the set with JACKAL also creates the body of BULKARM ? WOLFZERKER. The main armor color is Hexa Blue, which is used across the series including in BULKARM ? JACKAL, BULKARM a, WOODPECKER, and BLOCKADE IVY, allowing for customization in the same color. The other two colors are gray and clear red. *The Booster Pack does not include BULKARM ? WOLFZERKER's large mace. Model Specifications: - The included units can be assembled to create a wide array of parts that give models a completely different silhouette, including a head, chest armor, large shoulder armor, forearm armor, thigh armor, knee armor, waist armor, and large hand armor. - The visor on the unique head is movable and can be opened and closed. The left and right horns use 3mm connection points, allowing for customization with other parts. The camera eye is also made with clear parts. - The large shoulder armor has movable front, side and back parts, allowing for an unexpectedly wide range of movement. - The large hand armor can also be used as a shield when equipped with a universal grip. The two impact bolts on the tip can extend out. The internal oscillator has been recreated using clear parts. Additionally, the backside features numerous hexagonal holes that make it a perfect part to remodel. Included Items: - 1 x Head Unit - 1 x Chest Armor - 2 x Large Shoulder Armor Unit - 2 x Forearm Armor Unit - 2 x Thigh Armor Unit - 2 x Leg Thruster - 2 x Knee Armor Unit - 1 x Waist Armor Unit - 1 x Large Hand Armor Unit

"The "God of Thunder" V-THOR awakens with a new power. From the skies above, a hail of fire rains down like a thunderclap-who will it pierce?This humongous HEXA GEAR unit boasts massive new exterior parts for enhanced versatility, a high-capacity, back-mounted flight module for rapid battlefield deployment, and a powerful, high-velocity multi-barrel autocannon, turning the tides of any battlefield it is deployed to. The flight modules can also function independently as heavy-duty aerial assault drones, adding even more playability to this packed set.Model Specifications:- Featuring a cockpit accessible from the rear, this humanoid HEXA GEAR stands approximately 220mm tall with a wingspan of around 330mm.- The cockpit can open and close and hold a Governor pilot (sold separately). - The main unit and large flight module connect via two 5mm joints on the back, providing improved stability to support dynamic action poses.- Boasting an impressive range of movement, this model now features an additional joint in each forearm allowing for realistic handling of the included weapons, as well as various M.S.G weapons and booster packs. Enjoy the expertly engineered joint system to its fullest.- The large flight modules and high-velocity multi-barrel autocannon can be reconfigured into ground-attack drones. Stands for the drones in standby mode are also included.- The main high-velocity multi-barrel autocannon features a removable shield that can be mounted on either arm by swapping out joint parts.- The charged tactical twin-blade sword can transform into a rapier sword by folding down the two blades.- Effect parts can be attached to the knees to transform the model into a plasma blade mode.- Each of the four small attack drones mounted on the large flight module can be detached. With deployable wings and effect parts, they can be put into attack mode. The 3mm joints in the rear nozzles and HEXA G-R.A.M System slots on the undersides allow for the drones to be displayed mid-flight using separately sold Flying Bases.- This kit includes joints for Flying Base Neo, which is sold separately.- Due to its full-body HEXA G-R.A.M System, the model can be combined with existing HEXA GEAR to construct Mecha of various shapes.Included Items:- 1 x Main Unit - 1 x High-Velocity Multi-Barrel Autocannon - 1 x Shield ×1- 1 x High-Velocity Multi-Barrel Autocannon Mounting Parts Left/Right- 1 x Charged Tactical Twin-Blade Sword - 1 x Charged Tactical Twin-Blade Sword Mount - 1 x Hand Parts 4 types Set (Left and Right) - 1 x Large Flight Module - 1 x Large Flight Module Standby Mode Parts - 4 x Small Attack Drones - 6 x Plasma Blade Effect Parts - 1 x Archive Card

"Product Specifications:- GOVERNOR LIGHT ARMOR TYPE: ROSE, one of the first Governor models in the HEXA GEAR series, is back in Ver. 1.5 which comes with a newly revamped head part and updated materials.Update 1The head part now looks more realistic than the previous model; this model's head is based on EARLY GOVERNOR Vol. 3. Accessories for the head have also been newly sculpted, and now also include a fully enclosed combat helmet. A total of four different head designs can be assembled.Update 2The head and upper body armor, which were previously made with PVC material, have been changed to PS material, making it easier to paint and modify. (The wrists will continue to be made of PVC.)Update 3The weapon holding hand has been modified to make it easier to display weapons included in other Governor models.Update 4Due to the change of materials used, the designs and molds of some parts have been updated or newly made. The armor around the collar has been changed to a more open design to avoid interference with the range of motion of the neck. The shapes of the Lightweight Blade and Gun Knife have been changed to fit the newly sculpted weapon holding hand. *No changes have been made to the weapons connected to the hand parts. - This model is 74mm in size and has over 26 points of articulation.- There is a Connector on the back backpack by default to freely attach various parts.Included Items:- 1 x Head A (Visor Type) - 1 x Head B (Combat Helmet Type) - 1 x Head C (Regular Face Type) - 1 x Head D (Deception Repeater Type Only) - 1 x Lightweight Blade - 2 x Gun Knife - 5 x Types of Wrist Parts (Lightweight Blade Holding, Gun Knife Holding, Open, New Weapon Holding, Closed) × Left and Right Each- 1 x PVC HEXA G-R.A.M. (This item is a reproduction.)

Combat preparation complete. Start your engines. Introducing an all-new monstrous samurai Governor fused with a corpse hunter-type Alternative! Freed from the shackles of life, this vengeful warrior summons an inferno to engulf the battlefield. Model Specifications: - A heavily armed Governor, featuring the Ignite Spartan body equipped with samurai armor and a mace. - The four arms mounted on its back are individually articulated, allowing for inhuman action poses. - A spider Alternative that uses the mace as a weapon can be separated from the samurai Governor. - The spider Alternative consists of a head, torso, legs, and various joint parts, all of which can also be used for customizations. - Both the spider and samurai parts are sculpted in two colors. Included Items: - Spider Model ×1 - Ignite Spartan Model ×1 - Optional Grips ×1"

From Nemesis Now's "Cult Cuties" comes this scarily adorable resin figure.- hand-painted- Material: Resin- Size: approx. 15 cm

"The Gigantic Arms that can transform from a heavily armored air bike for bishoujo-style plastic models to a set of back-mounted Gatling arm units is back with an all-new look! The main colors are black and gunmetal from HEXA GEAR, while the sensors are the same clear red as used in many Kotobukiya model kits, making it compatible with a wide range of products. It can be ridden, worn, or even used in customizations, where its expertly crafted design really shines. Features: - The unit can transform between its base Air Ride Mode and Gunner Mode and can be used with series such as Megami Device and HEXA GEAR. - The barrels on the Gatling arms can be spread out and closed. - The large armored plating and bases of the arms are attached with ball joints that provide some range of motion. - The main unit, which also serves as a console, has deployable armor and extendable arms. - As the sensors and system console screen are made of clear parts, a model faithful to the concept art can be assembled out of the box. - Each part has 5mm, 3mm, and HEXA G-R.A.M System joints, so they can be easily combined with Kotobukiya original series units, including M.S.Gs. Included Items: - 2 x Hexagonal Universal Joint (Concave) - 2 xHexagonal Universal Joint (Convex) - 2 xHexagonal Universal Joint (5mm) - Colorless Clear Parts "

"By popular demand from many users, the tenth MEGALOMARIA character is a prototype color version Mephisto. Color Scheme: The model uses three colors, HEXA black, HEXA grey, and clear turquoise green, a combination designed to match well with both M.S.G and HEXA GEAR. Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands. Included Items: - 1 x Mephisto Model - 1 x Wrist Blades (Left and Right) - Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"From Kotobukiya's new sci-fi fantasy series, ARCANADEA, comes LUMITEA ReACT-A, a dark version of the Dears with an angelic form, Lumitea. With four new expression parts, this model offers a whole new side to Lumitea. By changing out certain parts, the model can be assembled in ""Normal Mode"" or ""Wilize Mode"" when in combat. The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series. The hair parts come in two different colors as bonus parts and can be chosen freely. The model brings to life a whole new version of Lumitea designed and supervised by popular illustrator necömi, also known for her video game and VTuber character designs. Included Items & Features: - The kit includes four all-new pre-printed face parts. - The hair parts come in two different colors as bonus parts and can be chosen freely. - The model can be assembled in ""Normal Mode"" or ""Wilize Mode"" by changing out certain parts. - The kit includes cover parts for the holes in the hair where the feather accessories attach, allowing the model to be displayed with or without the accessories. - Decals are included for creating various expressions. - Ring parts are included for engaging with Lumitea. - The model's large wings are equipped with joints that ensure the unique design looks attractive and organic while maintaining the model's poseability. - The magic circle connection part for the wings is a HEXA G-R.A.M. joint with a 3mm opening in the middle. The joint provides stability and holding power and is compatible with parts from the Hexa Gear series. - The upper arm and knee armor parts can be attached to various places on the model using the 3mm joints. - The knees use pop out joints that can't be seen from the front when the model is standing, maintaining the shape of the legs and providing a wide range of motion. - A sword and scabbard is included as special weapons. - A special stand is included. - The kit includes a set of hand parts with interlocked fingers to recreate a praying pose. - The kit includes five sets of PVC hand parts which are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series. - The 3mm joints on the model are compatible with parts from the M.S.G, Frame Arms, and Frame Arms Girl series. - The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series."

"From Kotobukiya's Sci-Fi Fantasy plastic model series, ARCANADEA, the lamia-form Dears, Meltina, joins the lineup!The model brings to life an original work by Z-ton, a prolific anime, manga and video game illustrator.This model can be assembled into ""Normal Mode"" or ""Wilize Mode"" when in combat by changing out certain parts.Equipped with several 3mm joints, this model is compatible with parts from other Kotobukiya original series.Included Items & Features:- The model can be assembled in ""Normal Mode"" or in the combat-ready ""Wilize Mode"" by changing out certain parts.- The kit includes four face parts that have been pre-printed with tampography.- Decals are included to help users create their preferred expressions.- The ears are removable and can be swapped with the ear parts of other Dears.- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.- Two special stands are included.- The kit includes six sets of newly sculpted PVC hand parts.- The double joints on the upper arm allow for various posing.- Each section of the serpent-shaped lower body is connected with a ball joint for flexible articulation.- The connection joint for the upper and lower body are made compatible with Elena.- The serpent tail can be extended using multiple kits.Normal Mode:- The kit includes a bat spirit, and the decorative daggers can also be held by Meltina.- The connection joint at the base of the hair on the back of her head provides articulation without getting in the way of the model's movements.- The cloth parts on the belt are attached via 3mm connection joints and 3mm ball joints and can be adjusted for various poses.- The magic circle-shaped part on the back of the model has a stable HEXA G-R.A.M joint with a 3mm connection point in the center and is compatible with joints of other HEXA GEAR series.Wilize Mode:- The hair accessory and bat spirit can be arranged to create the unique silhouette of the upper body.- A cobra shaped staff is included as the model's main weapon. It can take two forms, a staff or a whip, by switching out certain parts.- Two multi-blades that change shape are included as sub-weapons. They can be combined with special parts and connected to create a double-bladed sword.- The jaw of the cobra whip is articulated and can hold a sword. It can also be combined with the bat spirit by arranging the parts.- The kit comes with X-shaped eyes for the bat spirit for comical scenes."

Emma-chan Senpai is back in an all-new red uniform inspired by her beloved red dragon Agnirage, the protector of the Valiant Force's Crystal Reactors!Product Highlights:[St. Iris Gakuen Girls' High School Winter Clothes in Agnirage Crimson]In classic Emma fashion, she has even made her school uniform the same color as her beloved Agnirage. The pre-painted red parts in this kit are the same color as Agnirage, the most popular model from the series, allowing it to be used with all kinds of HEXA GEAR. It also goes perfectly with the red Queen's Guard Governor and V-THOR Gaifu Kaisei kits. Light Skin ToneThe color of the model's skin parts has been changed from the standard skin tone to crisp white for an overall paler tone.Ritsuka Saeki?Swim Style?Hair Arrange Ver., YOMI?Black Canvas?, Emma Koishikawa?ST. IRIS GAKUEN GIRLS' HIGH SCHOOL SUMMER CLOTHES?DREAMING STYLE, and Eimi Nijimura?RYOBU HIGH SCHOOL SUMMER CLOTHES?DREAMING STYLE all use the same skin tone, making for easy mixing and matching.Pre-Painted Face PartsFour face parts are included with eye colors changed to a purple close to that of Madoka Yuki.The kit comes with four all-new face parts ? The varied lineup includes an excited starry-eyed face, as well as a blushing face, glaring face and squiggly face, perfect for different situations. Naturally, the kit also includes unpainted versions as well. The included expression decals can be used with the unpainted face parts to make expressions looking different ways ?Torso Leaning ForwardThe newly sculpted torso leaning forward provides the model with a whole new range of possible poses, even including dashing forward in a low-to-the-ground sprint. Combine the squiggly face and torso to make a classic Emma situation of her walking away dejected.Four Skirt PartsIn addition to the standard and flowing skirts, which came with the summer clothes kit, there are two new skirts: spread out and sitting. The white line of her skirt comes separated as a part, allowing for assembly out of the box to create a model faithful to the original design.Sitting Leg PartsThe sitting leg parts newly sculpted for this winter kit can be used to pose the figure sitting on a chair (sold separately) or even riding a HEXA GEAR. Pose Emma-chan with a HEXA GEAR of your choice (i.e. Agnirage, Rayblade Impulse) and make her dreams come true!!!*The special sitting-type thigh parts are to be used with the sitting type skirt, as well.11 Hand PartsLike the summer clothes set, this kit includes 11 hand parts, perfect for use with the wide range of separately available accessories. Array of AccessoriesAs Emma aspires to be a god-like illustrator, the kit also includes a computer tablet and drawing tablet as accessories for drawing poses.The back of the computer tablet features a certain "special" emblem.The smartphone also comes in two versions, normal mode and gaming mode, with her beloved HEXA GEAR logo etched into the back.The St. Iris Gakuen Girls' High School bag features a removable school emblem covering a 3mm hole that can be used with flying bases.Five hair accessory parts for the various bangs are also included. Included Items: - 1 x Emma Koishikawa Model - 1 x Parts for 2 Types of Hairstyles (Wavy Long/Twintail/Buns) *The twintail and buns cannot be assembled at the same time, as they use the same base connection part.- 4 x Types of Bangs (Headband Standard/Headband with Glasses/No Headband Standard/No Headband with Glasses) - 4 x Types of Pre-Painted Face Parts (Starry-Eyed/Blushing/Glaring/Squiggly) - 4 x Types of Unpainted Face Parts (Starry-Eyed/Blushing/Glaring/Squiggly) - 11 x Types of Hand Parts (Holding Drawing Tablet/Holding Computer Tablet/Holding Game Controller/Cool Open Hand/Holding Standard/Holding Narrow/Holding Wide/Holding Round/Closed/Pointing A/Open) Left and Right Each- 1 x Torso Leaning Forward - 1 x Sitting Leg Parts - 4 x Types of Skirt Parts (Standard/Flowing/Spread Out/Sitting) *The sitting legs are required when using the sitting skirt.- 1 x Shoes Off Parts Set- 1 x Computer Tablet - 1 x Drawing Tablet - 1 x St. Iris Gakuen Girls' High School Bag - 5 x Hair Accessories - 1 x Display Base - 1 x 6mm Diameter Neck Part Compatible with Megami Device - 1 x Face Decals Sheet

"Everyone's favorite hobby-lover, Emma-chan Senpai, is back in her winter uniform! Product Highlights:Pre-Painted Face PartsThe kit comes with four all-new face parts ? The varied lineup includes an excited starry-eyed face, as well as a blushing face, glaring face and squiggly face, perfect for different situations. Naturally, the kit also includes unpainted versions as well. The included expression decals can be used with the unpainted face parts to make expressions looking different ways ? Torso Leaning Forward The newly sculpted torso leaning forward provides the model with a whole new range of possible poses, even including dashing forward in a low-to-the-ground sprint. Combine the squiggly face and torso to make a classic Emma situation of her walking away dejected. Four Skirt PartsIn addition to the standard and flowing skirts, which came with the summer clothes kit, there are two new skirts: spread out and sitting. The white line of her skirt comes separated as a part, allowing for assembly out of the box to create a model faithful to the original design Sitting Leg PartsThe sitting leg parts newly sculpted for this winter kit can be used to pose the figure sitting on a chair (sold separately) or even riding a HEXA GEAR. Pose Emma-chan with a HEXA GEAR of your choice (i.e. Agnirage, Rayblade Impulse) and make her dreams come true!!! *The special sitting-type thigh parts are to be used with the sitting type skirt, as well. 11 Hand PartsLike the summer clothes set, this kit includes 11 hand parts, perfect for use with the wide range of separately available accessories. Array of AccessoriesAs Emma aspires to be a god-like illustrator, the kit also includes a computer tablet and drawing tablet as accessories for drawing poses. The back of the computer tablet features a certain "special" emblem. The smartphone also comes in two versions, normal mode and gaming mode, with her beloved HEXA GEAR logo etched into the back.The St. Iris Gakuen Girls' High School bag features a removable school emblem covering a 3mm hole that can be used with flying bases. Five hair accessory parts for the various bangs are also included. Included Items:- 1 x Emma Koishikawa Model - 1 x Parts for 2 Types of Hairstyles (Wavy Long/Twintail/Buns) *The twintail and buns cannot be assembled at the same time, as they use the same base connection part.- 4 x Types of Bangs (Headband Standard/Headband with Glasses/No Headband Standard/No Headband with Glasses)- 4 x Types of Pre-Painted Face Parts (Starry-Eyed/Blushing/Glaring/Squiggly) - 4 x Types of Unpainted Face Parts (Starry-Eyed/Blushing/Glaring/Squiggly) - 11 x Types of Hand Parts (Holding Drawing Tablet/Holding Computer Tablet/Holding Game Controller/Cool Open Hand/Holding Standard/Holding Narrow/Holding Wide/Holding Round/Closed/Pointing A/Open) Left and Right Each- 1 x Torso Leaning Forward - 1 x Sitting Leg Parts - 4 x Types of Skirt Parts (Standard/Flowing/Spread Out/Sitting) ×1 Each *The sitting legs are required when using the sitting skirt.- 1 x Shoes Off Parts Set- 1 x Computer Tablet - 1 x Drawing Tablet - 1 x St. Iris Gakuen Girls' High School Bag - 5 x Hair Accessories - 1 x Display Base - 1 x 6mm Diameter Neck Part Compatible with Megami Device - 1 x Face Decals Sheet

"From Kotobukiya's popular Sci-fi Fantasy series, ARCANADEA, the Dears with an angelic form, Ermeda joins the plastic model kit lineup! The model is based on an original illustration by necömi, a popular illustrator known for her video game and Vtuber character designs. By changing out certain parts, the model can be assembled in ""Normal Mode"" or ""Wilize Mode"" when in combat. The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series. Included Items and Features: - The model can be assembled in ""Normal Mode"" or ""Wilize Mode"" by changing out certain parts. - The kit includes cover parts for the holes in the hair where the accessories attach, allowing the model to be displayed with or without the accessories. - The back and tips of the hair are articulated for more natural posing. - The bangs and back of the hair are compatible with Lumitea. - The kit includes four types of pre-printed face parts. - Decals for creating original face expressions are included. - Ring parts are included for engaging with Ermeda. - The model's two pairs of wings are equipped with joints that are placed so that they do not interfere with the silhouette of the model. This keeps their unique and organic design while still maintaining the model's poseability. - The magic circle connection part for the wings is a HEXA G-R.A.M. joint with a 3mm opening in the middle. The joint provides stability and is compatible with joints from the HEXA GEAR series. - The skirt parts are articulated with joints and can be moved. - Two types of loincloth are included, allowing the model to sit naturally. - The upper arm and knee armor parts can be attached to various parts of the model using the 3mm joints. - The upper arm is the first in the series to feature a double joint, allowing for a wider range of poses. - The knees use pop-out joints that can't be seen from the front when the model is standing, maintaining the beautiful shapes of the legs while also providing a wide range of motion. - A bow and arrows are included as special weapons. - Two types of arrows are included: Regular arrows and water-like clear blue arrows. Both can be connected to a flying base using the included dedicated parts. - The model kit includes six sets of PVC hand parts. They can hold existing weapons from the M.S.G, Frame Arms, and Frame Arms Girl series. - The 3mm connection points on each part make them compatible with existing M.S.G, Frame Arms, and Frame Arms Girl parts. - The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series."Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"The latest model to join the Frame Arms Girl spin-off series based on Kotobukiya's original Frame Arms robot series is HRESVELGR=RUFUS !This model is the bikini armor version of Frame Arms Girl Hresvelgr=Rufus which is based on the Frame Arms model of the same name designed by ToMo and transformed into an original female character illustrated by E-ji Komatsu. The kit is combined with HEAVY WEAPON UNIT 20 DRAGON ARMS created by famous mecha designer Naohiro Washio.Model Specifications:- HRESVELGR=RUFUS (bikini armor parts) and DRAGON ARMS mecha parts come in metallic red.- Combine various parts to create different weapon and armor loadouts.- Combine DRAGON ARMS with separately sold HEAVY WEAPON UNIT 21 DRAGON ARMS to transform the DRAGON ARMS into Drago Mode. DRAGON ARMS can be used to form the head of the dragon.- The frame for the Drago Mode torso utilizes the HEXA G-R.A.M. system from the Hexa Gear series, making it compatible with a variety of parts.- The Dragon Cannon comes with different grip parts for when the cannon is stowed and when it is equipped for battle, and it is possible to attach the cannon to various locations on the model. A foregrip part is also included to have a model hold the cannon in both hands. The gun barrel can be folded to be stowed away.- The Twin Blades come with a knives and wire part that can be attached to the base for a variety of customization options.- The Dragon cannon can be attached to the Shield Fang part. The Shield Fang also comes with a moveable grip that can be used to create a completely new model weapon!- The kit comes with three types of pre-printed face parts: default/facing forward, default looking to the right, and smiling to the left. One blank face part is also included.- Two armament blades are included.- The Chinese double bun hairstyle of Hresvelgr=Rufus and bonus hair parts from Hresvelgr Bikini Armor Ver. are included.- Includes three types of bangs used with Hresvelgr Bikini Armor Ver.: standard bangs and left and right bangs covering one eye. They can be used with the separately sold Hresvelgr=Rufus and Hresvelgr kits.- Hip joint parts compatible with 3mm joints are also included.- The extendable shoulder joint and bicep joints offer a wide range of motion.- The hand parts are attached with a ball joint, allowing for a wide range of expressive poses.- The model kit includes five sets of PVC hand parts. The hands, including joints, are compatible with models of the existing Frame Arms Girl series.- Includes decals for the eyes and other markings.- The 3mm connection points on the arms and legs are compatible with existing gear from the M.S.G and Frame Arms series.(This item is a reproduction.)What is Frame Arms Girl?Frame Arms Girl is a spin-off of Kotobukiya's original model kit series, Frame Arms, that creates a bishoujo-style character for each mecha.The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required.Equipped with the signature 3mm joints and PVC hands from Frame Arms, Frame Arms Girl models can be combined with a variety of parts from series such as M.S.G (Modeling Support Goods), Frame Arms, and more!The latest models' heads, arms, and legs in the series are fully compatible with each other, so users can create their very own unique Frame Arms Girl!"

"Introducing the second model in the ReACT where characters reappear with a whole new element!From the ARCANADEA series, the devilish Dears, Velretta, is back in an all-new fantasy-inspired ""dark version"" as Velretta ReACT-P.Featuring four new face parts, Velretta ReACT-P takes on a whole other persona from the original Velretta.By changing out certain parts, the model can be assembled in ""Normal Mode"" or ""Wilize Mode"" when in combat.The model is equipped with several 3mm joints, making it compatible with parts from other Kotobukiya original series.Included Items & Features:- The model can be assembled in ""Normal Mode"" or ""Wilize Mode"" by changing out certain parts.- The kit includes four different faces that have been pre-printed with tampography (Yelling, Scheming, Crying, and Panicking).- Decals are included for users to create their preferred expressions.- Both side hair strands are attached with ball joints, allowing for independent movement.- The pointed ears can be swapped with the ear parts of other Dears, including Lumitea.- The kit includes a ring part for engaging with Velretta.- The imp-like small demon wings on the back are mounted using joint parts at the base, combining an elegant, organic design with flexible articulation.- The magic circle connection part for the wings is a HEXA G-R.A.M. joint with a 3mm opening in the middle. The joint provides stability and is compatible with joints from the HEXA GEAR series.- The upper-arm armor parts are attached via 3mm diameter joints and can be attached to various locations.- The Normal Mode leg parts use pop-out joints for the knee that can't be seen from the front when the model is standing, maintaining the shape of the legs while providing a wide range of movement.- The kit includes a unique weapon that changes from an umbrella to a lance.- The skirt parts at the hip attach via 3mm joints, which allows movement without hindering the character's actions.- The tail that extends from the waist is connected by joint parts at the base, and because it has two connection points, it can take on various shapes to fit the poses of the character.- A special stand is included.- The kit includes five sets of PVC hand parts. They can hold existing weapons from the M.S.G, Frame Arms, and Frame Arms Girl series.- The 3mm connection points on each part make them compatible with existing M.S.G, Frame Arms, and Frame Arms Girl parts.- The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series."

From the ARCANADEA series, the Dears with an angelic form, Lumitea, appears in a new outfit!The model features her in an "iF" setting wearing her everyday clothes instead of her usual fantasy outfit.Four newly sculpted facial expression parts including a winking face and arms and legs with double joints that can be combined with the standard Lumitea model are included.The long skirt is made in one whole part using a clear white color to recreate the sheer cloth, which can also be removed for a short skirt look.The 3mm connection joints placed all over the model allow for customization across various Kotobukiya original series models.The model brings to life a whole new version of Lumitea designed and supervised by popular illustrator necömi, also known for her video game and Vtuber character designs.Included Items & Features:·The kit includes four face parts that have been pre-printed with tampography; winking, troubled, nom nom, and heart-struck.·The kit includes one long skirt and three types of short skirts to create various scenes.·The kit includes arm and leg parts in the same skin color as Lumitea. Exchange these parts with the standard Lumitea model to give her bare hands and legs with sandals.·This kit includes eleven types of PVC hand parts, featuring a V-sign and making a heart with both hands. What's more, an additional six sets of white versions that can be used for the standard Lumitea, also featuring the V-sign and making a heart with both hands, are included as bonus parts.·The knees use pop out joints that can't be seen from the front when the model is standing, maintaining the shape of the legs and providing a wide range of motion.·A HEXA G-R.A.M. joint is installed on the model's back, providing compatibility with HEXA GEAR series joints, as well as allowing the standard Lumitea's wings to be attached.·The 3mm joints on the model are compatible with parts from the M.S.G, Frame Arms, and Frame Arms Girl series.·A set of bent hip accessory parts are included as bonus parts to display the standard Lumitea in a sitting pose.·Decals are included for creating various expressions.·A special stand is included.·The kit includes neck parts for attaching heads from the Frame Arms Girl and Megami Device series.Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

Frame Arms Girl Kagutsuchi-Kou is a re-imagining of Wataru Inata's Frame Arms mecha design transformed into an original female character based on an illustration by Doyou. The proportions are based on the heavy armor of Frame Arms Kagutsuchi. Enjoy this newly designed lineup for Frame Arms Girl. Model Specifications: - This model is a completely brand new Frame Arms Girl. - The model features the thickest proportions in the series so far. It can be displayed in unarmed mode. - The chest contains ball joints, allowing for flexible movement on both the left and right sides. - The lower abdomen features a rotational axis that allows forward and backward bending. - Includes three pre-painted face parts (Default, Sly Smiling, and Shouting). - The bangs parts can be used with or without the headgear. The bangs can be changed to a non-mechanical version. - The sub arm auxiliary unit can be attached to the forearm and waist armor allowing for large weapons to be held. - This kit comes equipped with a high-speed roller unit for the legs and two boosters for the waist, forming large skirt armor. Each part can be adjusted and moved to display a variety of poses. - The large, layered shield can be mounted individually. With the grip attachment, the shield can be configured in a smaller form to prioritize mobility. Additionally, the shield's connector is the standardized 3mm, so it can be equipped on other girls. - The shield can also be attached to the bottoms of the model's feet so it can be used like snowshoes. It can support walking on soft surfaces. - Includes three types of decals for the eyes. - Includes five sets of PVC hand parts and one set of ABS wrist parts. - The PVC hands are compatible with existing weapons from the M.S.G and Frame Arms series. - The model is equipped with 3mm connection points for the joints, making it compatible with existing M.S.G, Frame Arms, Megami Device, Hexa Gear, Sousai Shojo Teien, and Arcanadea parts.