110 results found for “evangelion”

Prime 1 Studio is proud to present the latest addition to the Ultimate Diorama Masterline Series: the non-scale UDMEVA-04: Evangelion 13 from the Rebuild of Evangelion.Evangelion 13 first appears in Evangelion: 3.0 You Can (Not) Redo. Similar in appearance to EVA-01, EVA-13 is unique among EVAs with its double Entry Plug, which allows Shinji Ikari and Kaworu Nagisa to pilot in tandem. In Evangelion: 3.0, Shinji and Kaworu invade Central Dogma to remove the Spear of Longinus and the Spear of Cassius from Lilith, in a desperate bid to undo the effects of Third Impact.Things do not go as planned: Evangelion 13 has awakened! Two extra arms have burst forth from its chest casing, and instead of two different spears, its other two arms clutch duplicate Spears of Longinus. As it transforms, EVA-13 rises into the putrid air of Central Dogma as liquified Core material swirls around it. This Evangelion is ready to bring about Fourth Impact!Prime 1 Studio presents Evangelion 13 in its AWAKENED FORM! EVA-13 has been captured in its pivotal moment at the climax of Evangelion: 3.0. At a towering 64 inches, EVA-13's intricate details have been painstakingly reproduced; among these, its deep purple metallic armor, double eyes, and ceratopsid helmet. Both Spears of Longinus gleam in metallic blood-red paint. EVA-13 appears to float in thin air through the masterful sculpting and engineering of Prime 1 Studio: As its base, liquified Core material has been recreated with original color resin, swirling around EVA-13 to emphasize its dynamic ascension. This statue truly recreates a moment to behold! A must-have for Evangelion fans everywhere!Features:- Statue Size approximately 161 x 121 x 54 cm- One (1) designed themed base which reflects the putrid air of Central DogmaLimited edition.

"You were there all along, Yui..."From the "Rebuild of Evangelion" movies comes a figma of Gendo Ikari!- The smooth and flexible figma joints make it easy to create all kinds of poses.- A face part without a visor is included.- Hand parts for a variety of poses are included.- An articulated figma stand is included.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 14 cm tall and comes with base in a window box packaging.

From "Rebuild of Evangelion" comes a MODEROID plastic model of Evangelion Mark.06!- The model stands at 165mm tall and features various points of articulation. Interchangeable hand parts are included.- Includes a Spear of Cassius and halo parts.- The various parts of the mecha have been separated into various colored and clear runners, and some parts of the model are pre-painted with stickers included, making it easy to recreate the mecha from the series with a simple assembly.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

4.3 inch tall fully articulated figure construction kits centered around a ball-jointed frame, with plenty of accessories to recreate key moments from the Neon Genesis Evangelion TV series. Recreate the intense battle with 14th Angel Zeruel!

The adorable plush-like Cutie1 figurine line-up returns with the addition of the 4th Angel from the smash hit series, "Rebuild of Evangelion!" The lanky triangular contortion juxtaposed with Cutie1's signature stitches and zipper creates a somewhat comical appearance. The translucent red core and large button eyes are also spot on. This will make an excellent addition to your Evangelion collection alongside the 5th and 10th Angels!

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 14 cm tall and comes with base in a window box packaging.

From "Rebuild of Evangelion" comes a MODEROID plastic model of Evangelion Unit-02!- The model stands at 165mm tall and features various points of articulation. Interchangeable hand parts are included.- Includes a Progressive Knife and a Super-Electromagnetic Crossbow.- The various parts of the mecha have been separated into various colored and clear runners, and some parts of the model are pre-painted with stickers included, making it easy to recreate the mecha from the series with a simple assembly.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami with long hair!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From the anime film "Evangelion: New Theatrical Edition," Evangelion 13 joins threezero's ROBO-DOU collectible figure series! ROBO-DOU Evangelion 13 collectible is a non-scale articulated figure approximately 28 cm (11.02") tall (including the shoulder pylons) with a remarkable die-cast main frame that provides approximately 50 points of articulation. The figure is constructed of ABS, PVC, POM, and zinc alloy, and utilizes threezero's renown paint application technique to highlight all the mechanical details.The ROBO-DOU Evangelion Production 13 collectible figure includes many interactive features to increase playability. The figure comes with two interchangeable heads: a standard head and a head with red eyes. There are two interchangeable chest plates and an additional pair of arms, allowing for different display options to showcase Evangelion 13 with either two arms or four arms. A pair of RS Hoppers' housing block can be attached to the shoulder pylons. It also comes with two interchangeable back armor plates, offering a choice between a standard back armor plate and an articulated back armor plate designed specifically for attaching the four pieces of RS Hoppers in a floating state. Each RS Hopper can be equipped with attack mode effect piece or AT Field effect piece. Two Spear of Longinus are also included, which makes it possible to recreate a scene from the film. Other accessories are a total of ten pairs of interchangeable hands, with five pairs for the original arms and five pairs for the additional arms, featuring options including spears-holding hands, fists, action hands, relaxed hands, and a wide opened hand. The figure also comes with a ROBO-DOU action stand to support various poses.FEATURES:- Approximately 28 cm (11.02") tall including the shoulder pylons- Approximately 50 points of articulation- Die-cast zinc alloy frameACCESSORIES:- Two (2) pcs of interchangeable heads: one (1) standard head and one (1) with red eyes- Two (2) pcs of interchangeable chest plates: one (1) in a dual-arm state and one (1) in a four-arm state- One (1) pair of additional arms- One (1) pair of RS Hoppers' housing blocks that can be installed on shoulder pylons- Two (2) pcs of interchangeable back armor plates: one (1) standard back armor plate and one (1) back armor plate designed specifically for attaching the 4 pieces of RS Hoppers in a floating state- Four (4) pcs of RS Hoppers- Four (4) pcs of attack mode effect parts for the RS Hoppers- Four (4) pcs of AT Field effect parts for the RS Hoppers- Two (2) pcs of Spear of Longinus- Ten (10) pairs of interchangeable hands:- Five (5) pairs for the original arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- Five (5) pairs for the additional arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- One (1) pc of ROBO-DOU action stand- One (1) pc of connection part between ROBO-DOU Evangelion 13 and ROBO-DOU action stand

4.3 inch tall fully articulated figure construction kits centered around a ball-jointed frame, with plenty of accessories to recreate key moments from the 1997 Neon Genesis Evangelion theatrical film. This set of 3 includes option parts for flight mode, various heads, hands, and weapons for each of the Mass Production EVA units. Reissue of product released in 2023 to align with the previously released EVA-FRAME-DX01 set, as the Mass Produced EVAs face off against EVA Unit 2 (sold separately) in the animation.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 17 cm tall and comes with base in a printed box.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 22 cm tall and comes with base in a window box packaging.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 17 cm tall and comes with base in a printed box.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 22 cm tall and comes with base in a window box packaging.

Original deformed design posable figure series by MegaHouse, "Desktop Army"! This set contains 2 action figures. Each stands approx. 8 - 15 cm tall and comes with accessories.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

Original deformed design posable figure series by MegaHouse, "Desktop Army"! This set contains 2 action figures. Each stands approx. 15 cm tall and comes with accessories.

Crimson remembered. Mechanized mass redefined. EVA-02 launches-reimagined-under Battle Stations Condition One. Working alongside mechanical concept artist Josh Nizzi, the "Concept By Josh Nizzi" project draws out new dimensions of beloved characters. Now, from the " Evangelion" series, Evangelion Production Model-02 joins the lineup. This statue follows the lineage of the previously released Unit-01 and the Fourth Angel, blending bold mechanical reinvention with deep respect for the original design. Nizzi envisioned EVA -02 in the midst of battle, standing by the sea, ready to face an Angel. Armed in both hands, it strikes a dramatic pose, culminating in a heroic diorama display. The rebalanced proportions give the figure a more human feel, while detailed mechanical moldings and internal structures add a sense of purpose and precision. Design elements shared with Unit-01 further emphasize its place within the series. The body is finished in a crimson hue that fuses vivid anime tones with the subdued luster of heavy machinery. LED light-up features in its four eyes and chest further enhance the sense of presence, while the industrial shoreline-complete with a sunken tanker and rippling red sea-is rendered with striking realism. EVA-02, reimagined through a unique creative lens-an impactful addition to any collection. Specifications: - LED Light-Up Features (Eyes, Chest) LED Power Supply Method: TBD * Please prepare batteries, USB cables, or other necessary items depending on the final power supply method.

"Introducing an all-new Evangelion Unit-01 inspired by Mechagodzilla from Godzilla vs. Mechagodzilla! The design faithfully recreates the look of Mechagodzilla as seen in Godzilla vs. Mechagodzilla with a pre-painted metallic silver finish. Details like the eyes and head ducts are also pre-painted, allowing for a premium look straight out of the box. Breakdown of Features - Openable mouth - Interlocking Knee Joints: The front thighs and kneecaps are interlocked and can be moved - Interlocking Neck Joints: The throat joint is interlocked enabling the model to look up - Wide variety of interchangeable hand parts Scale: 1/400 Included Accessories: - 1 x Vinyl Umbilical Cable - 1 x Progressive Knife - 1 x Palette Rifle - 1 x Shoulder Replacement Part for Knife Deployment - 1 x Rear Part for use with Flying Base (used when connecting to a base) - 1 x Entry Plug Included Hand Parts: Fists (Left and Right), Open Hands (Left and Right), Gun-holding Hands (Left and Right), Knife-holding Hands (Left and Right), Expressive Open Hands A (Left and Right) (This item is a reproduction.)"

Original deformed design posable figure series by MegaHouse, "Desktop Army"! It stands approx. 15 cm tall and comes with accessories.

From "Rebuild of Evangelion" comes acrylic stands. *Number is random and cannot be selected.

"If you're going to pilot it, do it. Otherwise, get out!"From "Rebuild of Evangelion" comes a Nendoroid of Gendo Ikari! Face plates: - Serious face - Reprimanding face - Humanity abandoned face Optional parts: - Desk - Chair - Other optional parts for different poses. This product will be made at Good Smile Company's "Lucky Factory" in Tottori, Japan. The product will be proudly "Made in Japan", and sent all over the world for fans to enjoy!

From the "Neon Genesis Evangelion" series comes this PVC Statue. It stands 21 cm tall and comes with base in a window box packaging.

From the "Evangelion: New Theatrical Edition" series comes this PVC Statue. It stands 17 cm tall and comes with base in a printed box.