92 results found for “evangelion 2”

Prime 1 Studio is proud to present the latest addition to the Ultimate Diorama Masterline Series: the non-scale UDMEVA-04: Evangelion 13 from the Rebuild of Evangelion.Evangelion 13 first appears in Evangelion: 3.0 You Can (Not) Redo. Similar in appearance to EVA-01, EVA-13 is unique among EVAs with its double Entry Plug, which allows Shinji Ikari and Kaworu Nagisa to pilot in tandem. In Evangelion: 3.0, Shinji and Kaworu invade Central Dogma to remove the Spear of Longinus and the Spear of Cassius from Lilith, in a desperate bid to undo the effects of Third Impact.Things do not go as planned: Evangelion 13 has awakened! Two extra arms have burst forth from its chest casing, and instead of two different spears, its other two arms clutch duplicate Spears of Longinus. As it transforms, EVA-13 rises into the putrid air of Central Dogma as liquified Core material swirls around it. This Evangelion is ready to bring about Fourth Impact!Prime 1 Studio presents Evangelion 13 in its AWAKENED FORM! EVA-13 has been captured in its pivotal moment at the climax of Evangelion: 3.0. At a towering 64 inches, EVA-13's intricate details have been painstakingly reproduced; among these, its deep purple metallic armor, double eyes, and ceratopsid helmet. Both Spears of Longinus gleam in metallic blood-red paint. EVA-13 appears to float in thin air through the masterful sculpting and engineering of Prime 1 Studio: As its base, liquified Core material has been recreated with original color resin, swirling around EVA-13 to emphasize its dynamic ascension. This statue truly recreates a moment to behold! A must-have for Evangelion fans everywhere!Features:- Statue Size approximately 161 x 121 x 54 cm- One (1) designed themed base which reflects the putrid air of Central DogmaLimited edition.

The ultimate evolution of EVA Unit-01 from the novel "Evangelion ANIMA", known as Evangelion Unit-01: Final Model, has now joint the CCSTOYS MORTAL MIND series! Faithfully recreating the distinctive form of the Final Model, this figure incorporates alloy parts throughout, achieving a robust and weighty finish. Its articulated joints, replicating human skeletal and muscular movements, ensure a wide range of motion with natural fluidity. Additionally, iconic armaments such as the Power 8, Magoroku Exterminate Sword, and Lucretius Spear are all included! Don't miss out on this masterpiece, which represents the culmination of CCS's technological prowess!Set Contents:- Evangelion Unit-01: Final Model figure- Flight backpack- Leg armor (1 pair)- Leg armor weapon joints (1 pair)- Bizen Osafune- Magoroku Exterminate Sword & scabbard- Progressive Knife & scabbard- Lucretius Spear- Power Eight- Light wing effect parts- Joints for light wing effect parts- Black disk- Replacement hand parts (left and right, 6 pairs)- Opening tool- Display Base- Joint for Support Pillar x3 types- Support Pillar for Display Base (Long and Short)

A perfect balance of volume and displayability-introducing the new "Cutie1 M" series! Lifting off in this release is "Rebuild of Evangelion" Evangelion Unit-01. Standing approximately 30cm tall, its soft, rounded body blends seamlessly into any space while still making a statement. With its round button-like yellow eyes, tightly zipped mouth, and posable arms, you can enjoy even more ways to display it. Enjoy the irresistible cuteness of this plush-style EVA-now in the perfectly sized "M"!

From "Rebuild of Evangelion" comes a MODEROID plastic model of Evangelion Mark.06!- The model stands at 165mm tall and features various points of articulation. Interchangeable hand parts are included.- Includes a Spear of Cassius and halo parts.- The various parts of the mecha have been separated into various colored and clear runners, and some parts of the model are pre-painted with stickers included, making it easy to recreate the mecha from the series with a simple assembly.

From "Rebuild of Evangelion" comes a MODEROID plastic model of Evangelion Unit-02!- The model stands at 165mm tall and features various points of articulation. Interchangeable hand parts are included.- Includes a Progressive Knife and a Super-Electromagnetic Crossbow.- The various parts of the mecha have been separated into various colored and clear runners, and some parts of the model are pre-painted with stickers included, making it easy to recreate the mecha from the series with a simple assembly.

Neon Genesis Evangelion continues to be one of the most enduring anime franchises in history with some of the most beloved characters of all time not least of which are the incredible giant robots known as Evas. Ultimate Diorama Masterline series brings to life the most famous and popular of the Evas known as EVANGELION TEST TYPE-01, but this time in a special variant Night Battle Version with a LED light-up function on the head. With a fluorescent green paint application on the body, it will standout like it is glowing in the dark. A tall, lanky cyborg machine piloted by the Third Child Shinji Ikari, Unit-01 is humanoid with thin limbs, reinforced knees and chest, shoulder extensions, and its iconic horned head. The base is inspired by Tokyo-3 city.Size: approx. 77 x 61 x 68 cmLimited to 500 pieces worldwide.

From the "Rebuild of Evangelion" series comes this PVC Statue. It stands 24 cm tall and comes with base in a printed box.

A perfect balance of volume and displayability-introducing the new "Cutie1 M" series! Lifting off in this release is "Rebuild of Evangelion" Evangelion Unit-01. We've also prepared a Limited Color, featuring a shimmering glitter finish that adds a special touch! Standing approximately 30cm tall, its soft, rounded body blends seamlessly into any space while still making a statement. Plus, both arms are posable, adding even more fun to the display! Enjoy the irresistible cuteness of this plush-style EVA-now in the perfectly sized "M"!

"You were there all along, Yui..."From the "Rebuild of Evangelion" movies comes a figma of Gendo Ikari!- The smooth and flexible figma joints make it easy to create all kinds of poses.- A face part without a visor is included.- Hand parts for a variety of poses are included.- An articulated figma stand is included.

"Evangelion x Takashi Okazaki! Multipurpose Humanoid Decisive Weapon MUSHA TEST TYPE-01 goes to battle!An original figure project bares its blade!The iconic Evangelion Type-01 has been redesigned into a samurai armor variant action figure by Takashi Okazaki, the illustrator known for "Afro Samurai"! While keeping to the unique proportions of the original design, the armor (restraints) of the Evangelion Type-01 has been boldly reimagined as traditional Japanese armor, condensing all its appeal into an action figure that is approximately 255mm in height. The Great Sword "Magoroku" can be mounted to the right hip, with the blade fully painted to depict the wave patterns. Both the great sword and the two short swords in the shoulders can be drawn and sheathed, making the figure capable of action poses such as drawing the blade and double-handed sword stances, as well as the classic dynamic poses one would expect from an Evangelion figure.Brought to you by a shocking collaboration, MUSHA TEST TYPE-01 goes into battle!"

From the anime film "Evangelion: New Theatrical Edition," Evangelion 13 joins threezero's ROBO-DOU collectible figure series! ROBO-DOU Evangelion 13 collectible is a non-scale articulated figure approximately 28 cm (11.02") tall (including the shoulder pylons) with a remarkable die-cast main frame that provides approximately 50 points of articulation. The figure is constructed of ABS, PVC, POM, and zinc alloy, and utilizes threezero's renown paint application technique to highlight all the mechanical details.The ROBO-DOU Evangelion Production 13 collectible figure includes many interactive features to increase playability. The figure comes with two interchangeable heads: a standard head and a head with red eyes. There are two interchangeable chest plates and an additional pair of arms, allowing for different display options to showcase Evangelion 13 with either two arms or four arms. A pair of RS Hoppers' housing block can be attached to the shoulder pylons. It also comes with two interchangeable back armor plates, offering a choice between a standard back armor plate and an articulated back armor plate designed specifically for attaching the four pieces of RS Hoppers in a floating state. Each RS Hopper can be equipped with attack mode effect piece or AT Field effect piece. Two Spear of Longinus are also included, which makes it possible to recreate a scene from the film. Other accessories are a total of ten pairs of interchangeable hands, with five pairs for the original arms and five pairs for the additional arms, featuring options including spears-holding hands, fists, action hands, relaxed hands, and a wide opened hand. The figure also comes with a ROBO-DOU action stand to support various poses.FEATURES:- Approximately 28 cm (11.02") tall including the shoulder pylons- Approximately 50 points of articulation- Die-cast zinc alloy frameACCESSORIES:- Two (2) pcs of interchangeable heads: one (1) standard head and one (1) with red eyes- Two (2) pcs of interchangeable chest plates: one (1) in a dual-arm state and one (1) in a four-arm state- One (1) pair of additional arms- One (1) pair of RS Hoppers' housing blocks that can be installed on shoulder pylons- Two (2) pcs of interchangeable back armor plates: one (1) standard back armor plate and one (1) back armor plate designed specifically for attaching the 4 pieces of RS Hoppers in a floating state- Four (4) pcs of RS Hoppers- Four (4) pcs of attack mode effect parts for the RS Hoppers- Four (4) pcs of AT Field effect parts for the RS Hoppers- Two (2) pcs of Spear of Longinus- Ten (10) pairs of interchangeable hands:- Five (5) pairs for the original arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- Five (5) pairs for the additional arms: spears-holding hands, fists, action hands, relaxed hands, and special hands- One (1) pc of ROBO-DOU action stand- One (1) pc of connection part between ROBO-DOU Evangelion 13 and ROBO-DOU action stand

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami with long hair!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

The adorable plush-like Cutie1 figurine line-up returns with the addition of the 4th Angel from the smash hit series, "Rebuild of Evangelion!" The lanky triangular contortion juxtaposed with Cutie1's signature stitches and zipper creates a somewhat comical appearance. The translucent red core and large button eyes are also spot on. This will make an excellent addition to your Evangelion collection alongside the 5th and 10th Angels!

From the anime movie "Evangelion" comes a PVC Statue of Asuka Shikinami Langley. It stands 27 cm tall and comes in a window boy packaging.

From "Rebuild of Evangelion" comes Rei Ayanami. It stands approx. 28 cm tall and is made of PVC. Featuring a new illustration by and autograph of Mai Yoneyama (the autograph is printed)

From the anime series "Neon Genesis Evangelion" comes this incredible 1/7th-scale statue. It stands approx. 25 cm tall and is made of PVC. Comes in a window box packaging.

From the anime series "Neon Genesis Evangelion" comes this incredible 1/7th-scale statue. It stands approx. 25 cm tall and is made of PVC. Comes in a window box packaging.

From the anime series "Neon Genesis Evangelion" comes this incredible 1/7th-scale statue. It stands approx. 16 cm tall and is made of PVC. Comes in a window box packaging.

"Evangelion Test Type-01 Awake Ver. From EVANGELION:3.0 YOU CAN (NOT) REDO joins Kotobukiya's plastic model kit series!This model kit features precise joint design employing CAD technology from the original Evangelion Test Type-01 and a sophisticated form created by the hands of highly-skilled sculptors, with the awakened form being recreated with changed coloring in the parts.With the addition of newly sculpted parts, the first awakening form can now be recreated.Product Specifications:- Three head parts are included for users to choose from to recreate the transition between the normal form to the awakened form from the end of the series. - Two chest parts are included for users to choose from to recreate the normal form and awakened form. - Two left arm parts are included for users to choose from to recreate the normal left arm and the energy-generated arm after the original was lost. - A halo is included to recreate the halo in the awakened state. - The mouth can be opened or closed by adjusting the chin as shown in the film. - The Entry Plug is articulated and can be pulled out in conjunction with the movable rear block. - The front thighs and kneecaps are interlocked and can be moved. - The expansion of the shoulder knife storage can be recreated with additional included parts. - The interlocking of the neck allows for articulation, allowing the throat part to interlock and enabling movement when the model looks up.Included Items:- Closed fists (left and right), open hands (left and right), gun-holding hands (left and right), knife-holding hands (left and right), open hands with fingers curved (left and right), and grabbing hands (left and right) are included. - An additional closed fist (left), open hand (left), open hand with fingers curved (left), and grabbing hand (left) are included to recreate the awakened form's hand. - With a large amount of hand parts, various scenes from the series can be recreated.- Pre-Painted Parts and Clear Parts- Some of the parts are pre-painted, such as the eyes, tip of the chin, chest armor, neck, and the inside of the mouth when awakened.- Clear parts have been used to recreate the image from the series in various areas, such as the two kinds of awakened eyes, core, halo and halo support parts, and left arm.These features allow for Evangelion Test Type-01 Awake Ver. to be recreated like in the series by just assembling the model."

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

From "Rebuild of Evangelion" comes a Huggy Good Smile figure of Rei Ayanami in her plugsuit!Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it.

"The ever-popular Evangelion Test Type-01 rejoins Kotobukiya's plastic model kit series brandishing the Spear of Cassius as shown in "EVANGELION:3.0 +1.0 Thrice Upon A Time"!This model kit features a precise joint design with the use of CAD technology and a sophisticated form created by the hands of highly skilled sculptors to fully recreate the Evangelion and its included accessories, even the spear wielded in battle with Evangelion 13 in the movie trailer.Product Specifications- Mouth can be opened or closed by adjusting the chin as shown in the film.- Movable Entry Plug: The Entry Plug can be pulled out in conjunction with the movable rear block.- Interlocking Knee Joints: The front thighs and kneecaps are interlocked and can be moved.- Expansion of the shoulder knife storage: can be recreated with additional included parts.- Interlocking Neck Joints: The throat joint is interlocked enabling the model to look up.Included Hand Parts:- Spear-holding (left and right), closed fists (left and right), open hands (left and right), gun-holding (left and right), knife-holding (left and right), open hands with fingers curved (left and right), and grabbing hands. With the wide variety of hand parts, users can recreate many scenes from the film.Pre-Painted Parts:- Some of the parts are pre-painted, such as the yellow eyes, green tip of the chin, green chest armor, and black collar, allowing users to recreate Evangelion Test Type-01 from the film with ease.Included Items:- Spear of Cassius- Entry Plug- Umbilical Cable- Progressive Knife- Pallet Rifle- Shoulder Knife Storage Expansion Interchangeable Parts- Interchangeable Rear Parts with 3mm Connection Points Compatible with the Separately Sold New Flying Base- Decals (Arm and Shoulder Markings)This model kit is compatible with the separately sold New Flying Base for users to enjoy posing this model in various action poses. (Can be connected through the 3mm connecting points on the rear and on the Umbilical Cable.)"

From the anime series "Neon Genesis Evangelion" comes this incredible 1/7th-scale statue. It stands approx. 25 cm tall and is made of PVC. Comes in a window box packaging.

From the anime series "Neon Genesis Evangelion" comes this incredible 1/7th-scale statue. It stands approx. 25 cm tall and is made of PVC. Comes in a window box packaging.

Yoshiyuki Sadamoto's beautiful illustration has been turned into a figure!! Reviewed and approved by Mr. Sadamoto himself!Soryu Asuka Langley, as seen on the cover illustration of Volume 3 of "Neon Genesis Evangelion [Collector's Edition]" is now available as a figure! The delicate details of Yoshiyuki Sadamoto's illustration have been meticulously recreated down to her fingertips. This figure is truly the definitive Evangelion figure.Please enjoy the intricate design and the overwhelming sense of luxury created by the acrylic base.

"If you're going to pilot it, do it. Otherwise, get out!"From "Rebuild of Evangelion" comes a Nendoroid of Gendo Ikari! Face plates: - Serious face - Reprimanding face - Humanity abandoned face Optional parts: - Desk - Chair - Other optional parts for different poses. This product will be made at Good Smile Company's "Lucky Factory" in Tottori, Japan. The product will be proudly "Made in Japan", and sent all over the world for fans to enjoy!