Anime figures
Anime figures covering Nendoroids (chibi style, swappable faces), Figma (poseable action figures), and scale figures (fixed pose, high detail). Over 1,000 figures from Japanese manufacturers who've spent decades perfecting the craft of turning 2D anime characters into 3D collectibles.
...
-
Power Rangers Furai Action Action Figure Blue Ranger 13 CmLeverancier: Flame ToysThis is the [Furai Action] Power Rangers - Blue Ranger action figure. The figure is approximately 13cm tall, fully painted and pre-assembled. It features over 30 points of articulation and includes a base for posing.
- $102.00 USD
- $102.00 USD
- Eenheid prijs
- per
-
Power Rangers Furai Action Action Figure Pink Ranger 13 CmLeverancier: Flame ToysThis is the [Furai Action] Power Rangers - Pink Ranger action figure. The figure is approximately 13cm tall, fully painted and pre-assembled. It features over 30 points of articulation and includes a base for posing.
- $102.00 USD
- $102.00 USD
- Eenheid prijs
- per
-
Power Rangers Furai Action Action Figure Red Ranger 13 CmLeverancier: Flame ToysThis fully painted and pre-assembled action figure of the Red Ranger is part of the '[Furai Action] Power Rangers' line. It stands approximately 13 cm tall and features over 30 points of articulation, and includes a base for dynamic posing.
- $102.00 USD
- $102.00 USD
- Eenheid prijs
- per
-
Power Rangers Furai Action Action Figure Yellow Ranger 13 CmLeverancier: Flame ToysThis fully painted and pre-assembled action figure of the Yellow Ranger is part of the '[Furai Action] Power Rangers' line. It stands approximately 13 cm tall and features over 30 points of articulation, and includes a base for dynamic posing.
- $102.00 USD
- $102.00 USD
- Eenheid prijs
- per
-
Power Rangers Go! Kuro Kara Combine Action Figure Thunder Megazord 28 CmLeverancier: Flame ToysThe Thunder Megazord was the Mighty Morphin Power Rangers' 2nd primary Megazord. It was the combination of the five Thunderzords : Tyrannosaurus Red Dragon Thunderzord, Lion Thunderzord, Unicorn Thunderzord, Griffin Thunderzord & Firebird Thunderzord, which were all transformed from the Dinozords. - Flame Toys presents the 3rd [Go! Kuro Kara Combine]. It comes THUNDER MEGAZORD ! - This is Stylized Thunder Megazord! - Linkage articulation and five Thunderzords combination gimmicks! - Super-poseable with diecast parts for solidity and heaviness!
- $914.00 USD
- $914.00 USD
- Eenheid prijs
- per
-
Project A S.H.Figuarts Action Figure Dragon Ma 15 CmLeverancier: Bandai NamcoThe fearless 'Dragon' charges into battle against evil pirates! From 'Project A,' the courageous 'Dragon' is made into a product! Realized in the costume from the memorable city chase and the inn fight scenes. The 'TAMASHII digital coloring' faithfully reproduces fine shading and dimensionality in the expression parts.
- $100.00 USD
- $100.00 USD
- Eenheid prijs
- per
-
Project A S.H.Figuarts Action Figure Fei 15 CmLeverancier: Bandai NamcoFrom "Project A," 'Fei'-the thief who's an old acquaintance of the fearless Dragon and secretly targets the pirates' treasure-joins S.H.Figuarts.
Realized in the costume from the memorable inn fight scene where he teams up with 'Dragon'. The expression parts use 'TAMASHII digital coloring' to faithfully reproduce fine shading and dimensionality. Includes the wooden chair leg prop seen in the film.
[Set Contents] Main body, Interchangeable face parts, Interchangeable wrist parts (3 types each for left and right hands), Chair legs- $111.00 USD
- $111.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica Huggy Good Smile Mini Figure Homura Akemi 7 CmLeverancier: Good Smile CompanyFrom the anime series "Puella Magi Madoka Magica" comes Huggy Good Smile figure of Homura Akemi! Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it. Be sure to add them to your collection!
- $25.00 USD
- $25.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica Huggy Good Smile Mini Figure Madoka Kaname 7 CmLeverancier: Good Smile CompanyFrom the anime series "Puella Magi Madoka Magica" comes Huggy Good Smile figure of Madoka Kaname! Huggy Good Smile is a new chibi figure series. A magnet is mounted on the back of the head, and the arms of the figure can be moved up and down to pose it. Be sure to add them to your collection!
- $25.00 USD
- $25.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica Nendoroid Basic Action Figure Homura Akemi - Walpurgisnacht: Rising Ver. 10 CmLeverancier: Good Smile CompanyFrom "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" comes a Nendoroid [Basic] of Homura Akemi! What is Nendoroid [Basic]? Nendoroid [Basic] is a lineup of Nendoroids that omit face plates and optional parts, resulting in more affordability and faster production! They feature the same functionality as regular Nendoroids, allowing them to share interchangeable hand parts, leg parts, head parts and face plates with other Nendoroids!
- $43.00 USD
- $43.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica Rising Fluffy Puffy Big PVC Figure Kyubey 13 CmLeverancier: BanprestoAus dem Anime-Film 'Puella Magi Madoka Magica the Movie: Walpurgisnacht Rising' kommt diese offiziell lizenzierte PVC-Figur. Sie misst ca. 20 cm in der Breite und 13 cm in der Höhe und wird in einer bedruckten Box geliefert.From the anime movie 'Puella Magi Madoka Magica the Movie: Walpurgisnacht Rising' comes this officially licensed PVC figure. It measures approx. 20 cm in width and 13 cm in height and comes in a printed box.Du film d'animation "Puella Magi Madoka Magica the Movie: Walpurgisnacht Rising", voici cette figurine en PVC sous licence officielle. Elle mesure environ 20 cm de large et 13 cm de haut et est livrée dans une boîte imprimée.De la película de anime 'Puella Magi Madoka Magica the Movie: Walpurgisnacht Rising' llega esta figura de PVC con licencia oficial. Mide aproximadamente 20 cm de ancho y 13 cm de altura y viene en una caja impresa.
- $48.00 USD
- $48.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica The Movie -Walpurgisnacht: Rising- Nendoroid Basic Action Figure Kyoko Sakura Walpurgisnacht: Rising Ver. 10CmLeverancier: Good Smile CompanyFrom "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" comes a Nendoroid [Basic] of Kyoko Sakura! What is Nendoroid [Basic]? Nendoroid [Basic] is a lineup of Nendoroids that omit face plates and optional parts, resulting in more affordability and faster production! They feature the same functionality as regular Nendoroids, allowing them to share interchangeable hand parts, leg parts, head parts and face plates with other Nendoroids!
- $42.00 USD
- $42.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica The Movie -Walpurgisnacht: Rising- Nendoroid Basic Action Figure Kyoko Sakura Walpurgisnacht: Rising Ver. 10CmLeverancier: Good Smile CompanyAus "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" kommt eine Nendoroid [Basic] von Kyoko Sakura! Was ist Nendoroid [Basic]? Nendoroid [Basic] ist eine Reihe von Nendoroids, die auf Gesichtsplatten und optionale Teile verzichten, was zu einem günstigeren Preis und einer schnelleren Produktion führt! Sie verfügen über die gleiche Funktionalität wie reguläre Nendoroids, sodass sie austauschbare Handteile, Beinteile, Kopfteile und Gesichtsplatten mit anderen Nendoroids teilen können!From "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" comes a Nendoroid [Basic] of Kyoko Sakura! What is Nendoroid [Basic]? Nendoroid [Basic] is a lineup of Nendoroids that omit face plates and optional parts, resulting in more affordability and faster production! They feature the same functionality as regular Nendoroids, allowing them to share interchangeable hand parts, leg parts, head parts and face plates with other Nendoroids!De "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" vient une Nendoroid [Basic] de Kyoko Sakura ! Qu'est-ce que Nendoroid [Basic] ? Nendoroid [Basic] est une gamme de Nendoroids qui omettent les plaques faciales et les pièces optionnelles, ce qui se traduit par un prix plus abordable et une production plus rapide ! Elles disposent des mêmes fonctionnalités que les Nendoroids classiques, leur permettant de partager des pièces de main, de jambe, de tête et des plaques faciales interchangeables avec d'autres Nendoroids !¡De "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" llega una Nendoroid [Basic] de Kyoko Sakura! ¿Qué es Nendoroid [Basic]? ¡Nendoroid [Basic] es una línea de Nendoroids que omite placas faciales y partes opcionales, lo que resulta en un precio más asequible y una producción más rápida! ¡Cuentan con la misma funcionalidad que los Nendoroids regulares, lo que les permite compartir partes de manos, piernas, cabeza y placas faciales intercambiables con otros Nendoroids!
- $42.00 USD
- $42.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica The Movie -Walpurgisnacht: Rising- Nendoroid Basic Action Figure Sayaka Miki - Walpurgisnacht: Rising Ver. 10,0 CmLeverancier: Good Smile CompanyFrom "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" comes a Nendoroid [Basic] of Sayaka Miki! The Nendoroid is approx. 10,0 cm tall and comes with a stand in a window box. What is Nendoroid [Basic]? Nendoroid [Basic] is a lineup of Nendoroids that omit face plates and optional parts, resulting in more affordability and faster production! They feature the same functionality as regular Nendoroids, allowing them to share interchangeable hand parts, leg parts, head parts and face plates with other Nendoroids!
- $43.00 USD
- $43.00 USD
- Eenheid prijs
- per
-
Puella Magi Madoka Magica The Movie Nendoroid Action Figure Mami Tomo Walpurgisnacht: Rising Ver. [Basic] 10 CmLeverancier: Good Smile CompanyFrom "Puella Magi Madoka Magica the Movie -Walpurgisnacht: Rising-" comes a Nendoroid [Basic] of Mami Tomoe! What is Nendoroid [Basic]? Nendoroid [Basic] is a lineup of Nendoroids that omit face plates and optional parts, resulting in more affordability and faster production! They feature the same functionality as regular Nendoroids, allowing them to share interchangeable hand parts, leg parts, head parts and face plates with other Nendoroids!
- $43.00 USD
- $43.00 USD
- Eenheid prijs
- per
-
Re:Zero Starting Life In Another World Nendoroid Action Figure Beatrice 10 CmLeverancier: Good Smile CompanyFrom the anime series "Re:ZERO -Starting Life in Another World-" comes a rerelease of the Nendoroid of the Roswaal mansion's librarian, Beatrice! Her iconic hairstyle, outfit and eyes have all been converted into cute Nendoroid size! She comes with three face plates including a grumpy looking standard expression, an angry expression as well as the smiling expression she would often have with Pack around. Optional parts include Pack, a library stepladder as well as a couple of books. She can also be posed sitting on the stepladder, allowing for all sorts of different scenes in Nendoroid size!
- $73.00 USD
- $73.00 USD
- Eenheid prijs
- per
-
Re:Zero Starting Life In Another World PVC Figure Desktop Cute Rem (Star Dreamy Ver.) Renewal 13 CmLeverancier: TaitoThis is a PVC figure from Taito for the license 'Re:Zero Starting Life in Another World'. It shows the character Rem in the Star Dreamy Ver. Renewal and is approximately 13 cm tall.
- $26.00 USD
- $26.00 USD
- Eenheid prijs
- per
-
Reborn! Nendoroid Action Figure Mukuro Rokudo 2.0 10 CmLeverancier: Orange RougeFrom the anime series "REBORN!" comes a an updated version of Nendoroid Mukuro Rokudo! Face plates: · Determined smiling face · Scornful face · Mocking face Optional parts: · Mist Flame front hair parts · Trident · Background Sheet · Other optional parts for different poses.
- $73.00 USD
- $73.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure 10Th Angel 6 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 5.8cm in height. Figures are complete, pre-painted and and made of ABS.
- Featuring articulated arms and legs.
- A convex block base is included.
- The holes on the bottoms of the feet can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stands. They can also be attached to generic brick toys with the same measurements.- $31.00 USD
- $31.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure 4Th Angel 5 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 5cm in height. Figures are complete, pre-painted and and made of ABS.
- Features articulated arms and legs.
- A convex block base is included.
- The holes on the bottoms of the feet can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stands. They can also be attached to generic brick toys with the same measurements.- $31.00 USD
- $31.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure Evangelion Mark.06 5 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 5cm in height. Figures are complete, pre-painted and made with ABS.
- Translucent parts have been used to create the halo.
- Features articulated head, arms, and legs.
- The Spear of Cassius can be equipped to hand parts.
- Translucent support arms are included to display the model suspended in air.
- A convex block base is included.
- The holes on the bottoms of its feet and on clear support arms can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stand. They can also be attached to generic brick toys with the same measurements.- $25.00 USD
- $25.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure Evangelion Proto Type-00' 5 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 5cm in height. Figures are complete, pre-painted and made with ABS.
- Featuring articulated heads, arms, and legs.
- A large N² missile is included and can be attached to hand parts.
- A convex block base is included.
- The holes on the bottoms of the feet can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stands. They can also be attached to generic brick toys with the same measurements.- $27.00 USD
- $27.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure Evangelion Test Type-01 Pseudo DMS Phase 5 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 5cm in height. Figures are complete, pre-painted and made with ABS.
- Translucent parts are used for the left arm and halo.
- Features articulated heads, arms, and legs.
- Translucent support arms are included to display the model suspended in air.
- A convex block base is included.
- The holes on the bottoms of the feet and on clear support arms can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stand. They can also be attached to generic brick toys with the same measurements.- $25.00 USD
- $25.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Brickroid Mini Figure Evangelion Unit 02 Beast Form 2Nd Phase (Type 1) 4 CmLeverancier: Good Smile CompanyBrickroid is a series of collectible robots. Standing at around 5cm tall, these robot toys are made with the concept of "cool and fun"! The series uses a uniform design format to bring together robots from a plethora of media. The small bodies are loaded with all the fun of posing and displaying them.
- Approximately 4cm in height and 5cm in length. Figures are complete, pre-painted and made with ABS.
- Arms, legs and hips are articulated.
- A convex block base is included.
- The holes on the bottoms of the feet can be attached to 5mm diameter studs, allowing them to be displayed on the dedicated stands. They can also be attached to generic brick toys with the same measurements.- $31.00 USD
- $31.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Nendoroid Action Figure Asuka Shikinami Langley (Re-Run) 10 CmLeverancier: Good Smile CompanyFrom the popular animated film series "Rebuild of Evangelion" comes a rerelease of the Nendoroid of the Second Child, Asuka Shikinami Langley. She comes with three face plates including a standard expression, an angry expression and an expression pulling her eyelid down and sticking out her tongue.
She comes with her bag as an optional part and various hand parts including a pointing hand part in order to recreate various scenes from her everyday life. Be sure to add her to your collection, along with the other Evangelion Nendoroids!
Made at GSC's 'Lucky Factory' in Tottori, Japan.
This product will be made at Good Smile Company's 'Lucky Factory', which was completed on the 5th December 2014. The product will be proudly 'Made in Japan', and sent all over the world for fans to enjoy.- $57.00 USD
- $57.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Nendoroid Action Figure Asuka Shikinami Langley: Jersey Ver. 10 CmLeverancier: Good Smile Company"It’s been 14 years since then. Idiot, Shinji." From the popular animated film series "Rebuild of Evangelion" comes a Nendoroid of Asuka Shikinami Langley in a tracksuit!
Face plates:
- Glaring face
- Smiling face
- Angry face
Optional parts:
- Video game console
- Other optional parts for different poses.- $76.00 USD
- $76.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Nendoroid Action Figure Rei Ayanami (Re-Run) 10 CmLeverancier: Good Smile CompanyFrom the popular animated film series "Rebuild of Evangelion" comes a rerelease of the Nendoroid of the First Child, Rei Ayanami. She comes with three face plates including a standard expression, a blushing expression and a smiling expression.
For optional parts, she comes with her bag, a rag & bucket and kneeling lower-half parts to recreate scenes from her everyday school life. Additionally, eye patch and bandage parts are included, allowing you to recreate her injured appearance. Be sure to add her to your collection, along with the other Evangelion Nendoroids!
Made at GSC's 'Lucky Factory' in Tottori, Japan.
This product will be made at Good Smile Company's 'Lucky Factory', which was completed on the 5th December 2014. The product will be proudly 'Made in Japan', and sent all over the world for fans to enjoy.- $57.00 USD
- $57.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Nendoroid Action Figure Rei Ayanami: Long Hair Ver. 10 CmLeverancier: Good Smile CompanyFrom "Rebuild of Evangelion" comes a Nendoroid of Rei Ayanami with long hair! Face plates: · Pondering face · Smiling face · Cheerful face Optional parts: · Swallow · Title background sheet (Rebuild of Evangelion) · Other optional parts for different poses.
- $73.00 USD
- $73.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Robo-Dou Action Figure Evangelion Production Model Custom Type-08A (Evangelion: New Theatrical Edition) 25 CmLeverancier: Three A ToysFrom Evangelion: New Theatrical Edition, threezero introduces the Robo-Dou Evangelion Production Model Custom Type-08a - Mari Makinami Illustrious's signature EVA.
Standing approximately 25cm (9.8") tall, this figure is built with a die-cast interior frame featuring approximately 48 points of articulation, providing a solid structure and diverse range of poseability. The multi-layered paint application perfectly captures the signature pink color palette and intricate mechanical textures of Type-08a, combining the unique multi-eyed head design and sleek body build to allow for a wide range of dynamic action poses.
Specialized for firearm-based combat and long-range engagement, Type-08a comes fully-equipped with an extensive array of weaponry, and is the first figure in the Robo-Dou Evangelion series to include effect parts. This release introduces a collection of brand-new accessories, including the Handgun, Handgun Firing Effect, Pallet Rifle Firing Effect, and the iconic Super Long Distance Rifle.
It also features the standard Pallet Rifle, Progressive Knife, along with an Umbilical Cable and two interchangeable Entry Plugs in both inserted and extracted modes. Other accessories include five pairs of interchangeable hands and a Robo-Dou action stand.
FEATURES
- Approximately 25cm (9.8") tall
- Built with a remarkable die-cast interior frame with approximately 48 points of articulation
- Multi-layered paint application perfectly captures the signature pink color palette and intricate mechanical textures of Type-08a
- Unique multi-eyed head design and sleek body build
ACCESSORIES
- 1 Hand Gun
- 1 Hand Gun firing effect piece
- 1 Pallet Rifle
- 1 Pallet Rifle firing effect piece
- 1 Super Long Distance Rifle
- 1 Progressive Knife
- 1 Umbilical Cable
- 2 interchangeable Entry Plugs: 1 Short Entry Plug (for inserted mode) and 1 Long Entry Plug (for extracted mode)
- 5 pairs of interchangeable hands: 1 pair of relaxed hands, 1 pair of fists, 1 pair of open hands, 1 pair of hands for holding melee weapon, 1 pair of hands for holding rifle
- 1 Robo-Dou Action Stand
Materials: ABS, PVC, POM, Die-cast zinc alloy
Size: 25.0 cm (9.84")- $290.00 USD
- $290.00 USD
- Eenheid prijs
- per
-
Rebuild Of Evangelion Yumemirize PVC Figure Rei Ayanami School Swimsuit Ver. 13 CmLeverancier: SegaThis PVC figure from SEGA features Rei Ayanami from Rebuild of Evangelion. Part of the Yumemirize series, this School Swimsuit Ver. stands approximately 13 cm tall.
- $28.00 USD
- $28.00 USD
- Eenheid prijs
- per
![Puella Magi Madoka Magica the Movie Nendoroid Action Figure Mami Tomo Walpurgisnacht: Rising Ver. [Basic] 10 cm 4580828673243](http://www.amuzzi.com/cdn/shop/files/x_gsc67324_670x.jpg?v=1769799650)
![Puella Magi Madoka Magica the Movie Nendoroid Action Figure Mami Tomo Walpurgisnacht: Rising Ver. [Basic] 10 cm 4580828673243](http://www.amuzzi.com/cdn/shop/files/x_gsc67324_a_720x.jpg?v=1769799651)
