Anime figures

From the animation Armored Trooper VOTOMS, threezero proudly present the 1/12 Scopedog Ver.1.5! Compared with the initial 1/12 Scopedog which was released in 2017, this Ver.1.5 features new paint applications as well as upgraded joint structures. The shoulder ball joints and the ankle is upgraded to die-cast metal, and the shoulder sockets are improved for greater durability. 1/12 Scopedog Ver.1.5 is a 1/12th scale figure, approximately 13" (33cm) tall. It features threezero's detailed and weathered paint application, and has approximately 100 points of articulation points. The visor at the head, cockpit hatch at the chest, and maintenance hatch at the stomach can all be lifted open to show the cockpit inside, where the articulated pilot figure can be placed. The "Turret Lens" on the visor of can rotate to replicate the different zoom features of the camera. Both forearms can be extended via spring for the "Arm Punch" attack feature. Its finger joints are fully articulated. Each foot has a tire for the "Roller Dash" feature installed at the sole, which deploys when the front tip of the foot is lifted up. The "Turn Pick" at the side of each foot can be extended. Furthermore, its legs can be transformed to take the crouching mode, where the pelvis joints can be adjusted vertically in 3-steps to adjust the leg length to be utilized for the crouching mode transformation as well as for wider articulation of the joints. Accessories include the GAT-22 Heavy Machinegun, which its barrel is interchangeable between the long barrel and the short barrel. It comes with three machinegun magazines, and each magazine can be mounted on not only the Heavy Machine Gun, but also on the side armors of the hip in exchange with the Arm Punch magazine holders. It comes with eight Arm Punch magazines, which can be stored in the Arm Punch magazine holders, and also can be inserted in the magazine slot of the forearm, in activating the "Arm Punch" attack feature which uses spring. It comes with an articulated 1/12th scale pilot figure which stands approximately 15cm (5.9") tall. The pilot figure wears fabric costume over an articulated body (the costume is unremovable), and features a Bahauser M571 Armor Magnum which can be stored in the hip holster. It comes with various interchangeable hands to recreate various situations to pilot and interact with Scopedog figure. FEATURES FOR SCOPEDOG - Compared with the initial 1/12 Scopedog which was released in 2017, this Ver.1.5 features new paint applications as well as upgraded joint structures. The shoulder ball joints and the ankle is upgraded to die-cast metal, and the shoulder sockets are improved for greater durability. - Approximately 13" (33cm) tall fully articulated figure with approximately 100 points of articulation, including the fully articulated finger joints - The visor at the head, the cockpit hatch at the chest, and the maintenance hatch at the stomach can be lifted open to reveal the cockpit - The "Turret Lens" on the visor can rotate to replicate the different zoom feature of the camera - Both forearms can be extended via spring for the "Arm Punch" attack feature - Legs can transform into crouching mode - Pelvis joints can be adjusted vertically in 3-steps to adjust the leg length - Each foot has a tire for the "Roller Dash" feature installed at the sole, which deploys when the front tip of the foot is lifted up - The "Turn Pick" at the side of each foot can be extended ACCESSORIES FOR SCOPEDOG - 1 GAT-22 Heavy Machinegun with detachable fabric belt and shoulder stock - 2 Interchangeable barrel: One (1) long barrel, one (1) short barrel - 3 Machinegun magazines - 8 Arm Punch magazines - 2 Arm Punch magazine holders for the side hip amor FEATURES OF PILOT - Approximately 15cm (5.9") tall - Fully-articulated - Features fabric costume (unremovable) - Can be placed inside Scopedog's cockpit ACCESSORIES FOR PILOT - 1 x Bahauser M571 Armor Magnum - 4 x Kinds of interchangeable hands (1 x pair of fists, 1 x pair of relaxed hands, 1 x pair of hands for holding control stick, 1 x ight hand for holding Armor Magnum) Materials: ABS, PVC, POM, die-cast zinc alloy, fabric

threezero's CHAINSAW MAN figures are the next exciting release to fall under the FigZero product line. FigZero has become well-known for pushing the envelope in anime figures with highly-poseable 1/6th scale articulated figures featuring detailed sculpts and tailored costuming. FigZero 1/6 Denji is approximately 11.6 inches (29.5 cm) tall, and is a fully-articulated collectible figure with over 27 points of articulation and a brand-new torso designed especially for the figure. All parts are sculpted by renowned Japanese sculptor Akinori Takaki. Denji includes a total of two interchangeable face plates (smirking and gloating expressions) and an interchangeable Chainsaw head! The lower jaw of the Chainsaw Man head is interchangeable between closed and opened, with a tongue sticking out of the opened jaw with an articulated joint at the base. The figure also includes a total of six sets of interchangeable hands and a pair of chainsaw forearms to complete the transformation into Chainsaw Man. Additional accessories include an axe and unarticulated 1/6 scale Pochita. The character's outfit includes a white shirt, slacks, and a necktie, which are all made of fabric. FEATURES: - Sculpted by renowned sculptor Akinori Takaki - 1/6th scale, approximately 11.6 inches (29.5 cm) tall - Over 27 points of articulation - Brand-new custom torso COSTUME: - One (1) fabric white shirt - One (1) fabric slacks - One (1) fabric necktie - One (1) belt - One (1) pair of sneakers ACCESSORIES: - Two (2) interchangeable Denji face plates: One (1) smirking expression and one (1) gloating expression - Six (6) sets of interchangeable hands: One (1) pair of fists, One (1) pair of opened hands, one (1) pair of weapon-holding hands, one (1) starter rope pulling right hand, one (1) V-sign right hand, and one (1) left pointing hand. - One (1) set of interchangeable parts for Chainsaw Man's transformation: One (1) Chainsaw head and One (1) pair of Chainsaw forearms - Two (2) interchangeable Chainsaw head lower jaws: One (1) closed jaw and one (1) opened jaw - One (1) axe - One (1) Pochita

threezero proudly presents the first FigZero 1/6 articulated figure from the anime Cyberpunk: Edgerunners - Lucy, the elite netrunner!*The FigZero 1/6 Lucy offers unparalleled craftsmanship and artistry from threezero. Standing 28.5cm (~11.22") tall with approximately 30 points of articulation, this exquisitely-crafted collectible captures the mesmerizing detail of the iconic character from Cyberpunk: Edgerunners.Featuring a brand-new female torso developed by threezero, Lucy's figure showcases a striking resemblance to the anime character. The form-fitting bodysuit, rendered with threezero's exquisite 3D sculpting technique, accentuates Lucy's graceful silhouette. The FigZero 1/6 Lucy features a fabric Jacket with detailed accessories, recreating her sci-fi, cyberpunk look, enhancing the figure's overall build. The costume also maintains excellent articulation, allowing for a wide range of dynamic poses.Features- 1/6 scale, approximately 28.5cm (~11.22") tall- Fully articulated figure with ~30 points of articulation- Features a brand-new female torso developed by threezero with striking resemblance to the anime character- Features a fabric Jacket with detailed accessories that maintains excellent articulation- Form-fitting bodysuit rendered with threezero's exquisite 3D sculpting technique accentuates Lucy's graceful silhouetteCostume - 1 fabric jacket with accessories- 1 fabric shorts with leggings- 1 beige waist bag with belt- 1 pair of bootsAccessories - 3 interchangeable faceplates: One (1) standard face, one (1) battle face, one (1) netrunning face- 2 interchangeable hair pieces: One (1) standard hair piece, and one (1) floating hair piece- 1 cigarette- 1 unity- 1 netrunning cover with magnet- 1 poseable monowir- 5 sets of interchangeable hands: One (1) pair of Monowire hands, one (1) pair of hands for holding unity, one (1) taunting right hand, one (1) right hand for holding the cigarette, and one (1) pair of relaxed handsIN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION

From the phenomenal anime "Demon Slayer: Kimetsu no Yaiba", a series of 1/6th scale collectible figures has debuted as part of threezero's FigZero line! The first figure is the protagonist, Tanjiro Kamado! FigZero 1/6 Tanjiro Kamado is approximately 27.5 cm tall. It is a fully-articulated collectible figure with approximately 37 points of articulation. The materials used for the figure are mainly ABS, PVC, POM and fabric. The figure's attire includes the fabric-made Demon Slayer Corps uniform, and Tanjiro's iconic haori with an interior metal wire for poseabilityThe figure comes with three interchangeable facial expressions (one smile face, one serious face and one gag face) and six sets of interchangeable hands. Additional accessories include a metal Nichirin Sword, a knife and a plastic-made wooden box. Furthermore, a breath effect part (with magnet inside) and water breathing effect part are included to showcase Tanjiro's dynamic swordsmanship.Specifications:FEATURES:- 1/6th scale, approximately 27.5 cm tall - Approximately 37 points of articulationCOSTUME:- One (1) Demon Slayer Corps uniform made of fabric- One (1) haori made of fabric- One (1) pair of shin guards- One (1) belt- One (1) pair of zori- One (1) pair of tabi socksACCESSORIES:- Three (3) interchangeable faces: One (1) simile face, One (1) serious face (with magnet inside to attach breath effect piece), and one (1) gag face- Six (6) sets of interchangeable hands: One (1) pair of fists, One (1) pair of relaxed hands, One (1) pair of open hands, one (1) pair of griping hand, one right shakehand grip hand and one (1) left holding sheath hand- One (1) Nichirin Sword made of metal and its sheath- One (1) knife- One (1) openable wooden box made of plastic- One (1) Water Breathing effect part for attaching to the Nichirin Sword- One breath effect (with magnet inside) to attach to the serious face

From the manga “Dorohedoro,” threezero is pleased to announce the 1/6th scale articulated figure of En, the boss of the En Family! The figure features an original costume designed specially for this release by original manga artist Q Hayashida. FigZero En is a fully-articulated collectible figure with approximately 35 points of articulation, and stands approximately 35 cm (13.7") tall including hair. The set of head pieces and the smoke effect piece are sculpted by renowned sculptor Masaki Apsy, and feature movable eyeballs that give the figure more expressive expressions. En comes with two interchangeable faceplates, including a face to attach either mask and a bare face. The two interchangeable masks include a mask with closed mouth and a mask with opened mouth which the magic smoke effect piece attaches to. The coat, shirt, and pants are made of fabric (but the costume is not designed for undress). The figure features detailed painting techniques that mimic dirt, wear, and weathering. Other accessories include three jars with mushrooms inside, one mushroom-shaped Hookah container with smoking pipe, one mushroom cane, one Kikurage (Judas's Ear) with an articulated head, one pet kennel which fits Kikurage inside, and three pairs of interchangeable hands (fists, relaxed hands, and hands for holding the mushroom cane). FEATURES - A set of head pieces and smoke effect piece sculpted by renowned sculptor Masaki Apsy - Approximately 35 cm (13.7”) all including hair - Fully-articulated figure with a total of approximately 35 points of articulation - Fabric costume (not designed for undress) - Weathering effects - Articulated eyeballs COSTUME - One (1) coat made of fabric (mushrooms attached to the surface) - One (1) shirt made of fabric - One (1) pair of pants made of fabric - One (1) pair of sneakers made of plastic ACCESSORIES - Two (2) interchangeable faceplates (one face to attach mask and one bare face) - Two (2) interchangeable masks (one mask with closed mouth and one mask with opened mouth) - One (1) magic smoke effect piece which can be attached to the mask with opened mouth - Three (3) jars with mushroom inside - One (1) mushroom-shaped Hookah container with smoking pipe - One (1) mushroom cane - Three (3) pair of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, and one (1) pair of hands for holding mushroom cane - One (1) Kikurage (Judas's Ear) with articulated head - One (1) pet kennel to place Kikurage inside Size: 35.0 cm (13.78")

threezero is proud to present the ROBO-DOU Evangelion Next Gen Testbed-04! Previously only seen in original designs, the Evangelion Next Gen Testbed-04 is meticulously brought to life. Constructed with a die-cast zinc alloy frame and exterior, the figure stands approximately 25 cm tall and has approximately 48 points of articulation. Roughly 75% of the total build's frame and exterior components are made of die-cast zinc alloy, which significantly enhances poseability and stability and gives the model a premium metallic feel. Additionally, it features a metallic paint finish which accentuates its intricate mechanical details, with a striking contrast between icy silver and fiery red that brings the figure to life. The figure comes with a variety of accessories, including a Spear of Longinus painted in metallic red, which matches the overall color scheme. Also included are two interchangeable Entry Plugs, a Progressive Knife, a Pallet Rifle, an Umbilical Cable, multiple pairs of interchangeable hands, and a dedicated ROBO-DOU Action Stand for displaying the figure in dynamic poses. FEATURES - Approximately 25 cm (9.8") tall - Approximately 48 points of articulation, roughly 75% of the total build's frame and exterior components are made of die-cast zinc alloy - Die-cast zinc alloy frame and exterior ACCESSORIES - 1 Progressive Knife - 1 Pallet Rifle - 2 interchangeable Entry Plugs: one (1) short Entry Plug (for inserted mode), and one (1) long Entry Plug (for extracted mode) - 1 Spear of Longinus - 1 Umbilical Cable - 5 pairs of interchangeable hands: one (1) pair of relaxed hands, one (1) pair of fists, one (1) pair of opened hands, one (1) pair of hands for holding Melee Weapon, and one (1) pair of hands for holding Pallet Rifle - 1 ROBO-DOU Action Stand Material: ABS, PVC, POM, zinc alloy

From the anime feature "FULLMETAL ALCHEMIST BROTHERHOOD," threezero is proud to present the 1/6 scale collectible figure of Roy Mustang, the "Flame Alchemist"! "FigZero 1/6 Roy Mustang" is an articulated figure approximately 29.5cm tall, with approximately 37 points of articulation. Its costume uses fabric (The fabric costumes are stitched and cannot be taken off). The head piece is sculpted by renowned sculptor Akinori Takaki. The face piece is interchangeable between a standard face, a sideways glance face, and an angry expression face. It also includes two sets of interchangeable hair pieces: a set of standard hair pieces and a set of drifted hair pieces (Each set of hair pieces consists of front hair and back hair). The figure comes with five kinds of interchangeable hands: a pair of gloved hands before spelling Flame Alchemy attack, a pair of gloved hands after spelling Flame Alchemy attack, a pair of relaxed gloved hands, a bare left hand, and a bare right hand for holding the lighter. Other accessories include a piece of triggered fire effect, a lighter, and the original form of the homunculus "Envy", allowing fans to recreate iconic scenes from the anime. FEATURES - Approximately 29.5cm (12 inches) tall - Original sculpt of the head by Akinori Takaki - Approximately 37 points of articulation - Exquisitely detailed decals & paint application COSTUME - One (1) piece of white shirt - One (1) uniform jacket - One (1) uniform skirt - One (1) uniform pants - One (1) belt - One (1) pair of boots ACCESSORIES - One (1) piece of trigger fire effect - One (1) lighter - One (1) original form of the homunculus "Envy" - Two (2) sets of interchangeable hair pieces (Each set of hair pieces consists of front hair and back hair): one (1) set of standard hair pieces, and one (1) set of drifted hair pieces - Three (3) interchangeable faceplates: one (1) standard face, one (1) sideways glance face, and one (1) angry expression face - Five (5) kinds of interchangeable hands: one (1) pair of gloved hands before spelling Flame Alchemy attack, one (1) pair of gloved hands after spelling Flame Alchemy attack, one (1) pair of relaxed gloved hands, one (1) bare left hand, and one (1) bare right hand for holding the lighter

To celebrate the 70th Anniversary of GODZILLA (1954) and the 50th Anniversary of GODZILLA VS. MECHAGODZILLA (1974), threezero is proud to announce the KAIJU-DOU Godzilla (1974)! The figure stands approximately 9 inches (22.9 cm) tall and is made with a die-cast zinc alloy and engineering-grade plastics internal frame system. A single piece of outer "skin" seamlessly covers the frame system. It is exceptionally posable, with approximately 26 points of articulation, including adjustable mouth, and a fully articulated tail. Its precise and incredible details are sculpted by Takeshi Oka, faithfully replicating Godzilla's appearance as seen in the film.KAIJU-DOU Godzilla (1974) has many special features to enhance playability. Pressing the button hidden underneath the chest area triggers Godzilla's iconic roar sound, and the LED-illuminated dorsal plates will light up when pressing another hidden button. These two features require three AG3 batteries to operate (batteries not included). The Heat Ray effect accessory, which can be placed in Godzilla's mouth, faithfully replicating his signature attack move.Additionally, KAIJU-DOU Godzilla (1974) includes two broken transmission towers, which can be placed in front of his chest, mimicking the classic scene where the transmission towers attach to his body using magnetic force after absorbing lightning energy. Also included are three sets of interchangeable hands, which allow for a wide range of display and posing options!FEATURES:- Approximately 9 inches (~22.9cm) tall- Seamless "skin" covering an internal frame system- Godzilla's Iconic Roar Sound Effect- LED Illuminate Dorsal Plates light up*- Detailed and weathered paint application- 26 Points of articulation including adjustable mouth and fully articulated tail- Sculpted by Takeshi Oka ACCESSORIES- 2 x Transmission Towers- 1 x Heat Ray Effect- 3 x sets of interchangeable hands: one (1) pair of fists, one (1) pair of action hands (assembled), one (1) pair of relaxed handsLED FEATURES*Dorsal Plates*Requires AG3 batteries x 3, batteries not includedMaterials: ABS, PVC, POM, die-cast zinc alloy, fabric

From the TV series Gridman the Hyper Agent, threezero is proud to announce the FigZero Gridman the Hyper Agent (Tokusatsu Color Version) 12inch articulated figure! FigZero Gridman the Hyper Agent (Tokusatsu Color Version) stands approximately 30cm tall (non-scale), and is a fully-articulated figure with approximately 40 points of articulation. Compared to the previously released standard version, this version boasts a more profound shadow or shaded style paint job inspired by the original TV series suit. The ankle joints have been upgraded from a single-joint to a double-jointed structure in order to increase the range of motion. Additionally, both the long and short Plasma Blades now feature a plated finish, and the Barrier Shield includes added shaded style painting. A newly sculpted Grid Beam effect part is also included, which can be attached to the left forearm armor. The outfit is made of a combination of fabric and plastic, featuring a unique coating to recreate the texture as seen in the TV series. The collectible figure is full of high-precision sculpted details, and LED light-up features are installed at the eyes and the chest. As for his weapon, he comes with a Plasma Blade in a long form, a Plasma Blade in a short form, and a Barrier Shield. The long Plasma Blade can be combined with the Barrier Shield to form Gridman's Sword. The short Plasma Blade can be combined with the Barrier Shield to form the Thunder Axe. The figure also includes 4 pairs of interchangeable hands: 1 pair of fists, 1 pair of Fixer Beam hands, 1 pair of relaxed hands, and 1 pair of weapon holding hands. Together, they can replicate various scenes from the TV series. Features: - Non-scale, approximately 30cm (12") tall - Fully articulated body with approximately 40 points of articulation. Compared to the previously released standard version, the ankle joints have been redesigned, upgraded from single-joint to double-joint structure to increase the range of motion. - Outfit is made of a combination of fabric and plastic, featuring a unique coating to recreate the texture seen in the television series - High-precision sculpted detail - Plasma Blade (Long) can be combined with Barrier Shield to form Gridman Sword - Plasma Blade (Short) can be combined with Barrier Shield to form Thunder Axe - Compared to the previously released standard version, the blades for both the long and short Plasma Blades have been updated with a plated finish. Additionally, the Barrier Shield features shadow or shaded style painting. - Comes with newly sculpted effect parts for the Grid Beam. Accessories: - 2 pcs of Plasma Blades: 1 x Long and 1 x Short - 1 x Barrier Shield - 4 pairs of interchangeable hands: 1 pair of Fists, 1 pair of Fixer Beam Hands, 1 pair of Relaxed Hands, and 1 pair of Weapon Holding Hands - 1 x Grid Beam Effect with left arm armor *LED Features: - Eyes - Chest Materials: ABS, PVC, POM, Fabric Requires 4x AG13 batteries (not included).

The Forgers goes on a winter vacation, changes the course of the world's fate, and Loid Forger makes an exciting return to threezero's FigZero 1/6 scale figure series, with a brand-new winter costume as seen in the movie SPY×FAMILY CODE: White!FigZero 1/6 Yor Forger (Winter Costume Ver.) is approximately 11.2" (28.5 cm) tall, and is a fully-articulated collectible figure made of ABS, PVC, and POM plastics with approximately 35 points of articulation and fabric textiles. The detailed sculpts and tailored outfits bring the anime character to life.FigZero 1/6 Yor Forger (Winter Costume Ver.)'s costume features the outfit she wears in the movie, SPY×FAMILY CODE: White, which includes a white hat, beige coat, white shirt, a belt with sheaths, blue jumper skirt, yellow stockings, brown boots. Other accessories include a pair of knives, three interchangeable faceplates (default expression, smiling face, and serious face), as well as four pairs of interchangeable hands to create dynamic action poses.FEATURES- Approximately 11.2" (~28.5cm) tall- Approximately 32 points of articulation- Costume made of a combination of fabric and plastic parts- Various accessories provided for different posesCOSTUME- 1x white hat- 1x beige coat- 1x) white shirt- 1x belt with sheaths- 1x blue jumper skirt- 1x pair of yellow stockings- 1x pair of brown bootsACCESSORIES- 1x pair of knives- 3x interchangeable face parts: One (1) face with the default expression, one (1) smiling face, and one (1) serious face- 4x pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of knife-holding hands, and one (1) pair of knifehand strike

From the popular anime TRIGUN, threezero introduces the FigZero 1/6 fully-articulated collectible figure of "The Humanoid Typhoon" Vash the Stampede! Standing about 31cm (12") tall, the figure has approximately 32 points of articulation, allowing for smooth, dynamic poses that capture Vash's wild combat style. Vash's signature red trench coat is crafted from a super-thin, flexible and durable material, with specialized tailoring to replicate wrinkled textures and light weathering from extended wear in No Man's Land. Embedded wiring in his coat allows for easy posing, while the surface has a leather-like sheen that increases the material's resilience. The look is finished with dark brown trousers, the iconic straps on his left arm, and dark brown boots-meticulously detailed for true accuracy to the character design. The figure's accessories include two interchangeable face plates (both standard and serious expressions), a pair of sunglasses, Vash's gun, two knives, and the elusive black cat Kuroneko-sama. With four sets of interchangeable hands, easily recreate a variety of classic action scenes from the anime! Specifications: FEATURES - 1/6th scale, approximately 31 cm (12") tall - Approximately 32 points of articulation - Exquisite tailored clothing and detailed appearance - The coat has metal wires inside the bottom hem for posability - A wide range of accessories to recreate iconic scenes COSTUME - 1 red trench coat - 1 pair of pants - 1 strap detailing on the left arm - 1 pair of boots ACCESSORIES - 2 interchangeable face plates: One (1) standard and one (1) serious expression - 1 pair of sunglasses - 1 Vash's gun - 1 Knife A - 1 Knife B - 1 Kuroneko-sama - 4 types of interchangeable hands: One (1) pair of fists, one (1) pair of open hands, one (1) pair of hands for holding revolver, and one (1) left hand for holding knives Materials: PVC, ABS, POM, fabric

From the anime 'ULTRAMAN' FINAL season, ULTRAMAN SUIT JACK is now available as a 1/6th scale articulated figure! This is a heavily armored huge ULTRAMAN SUIT which is worn by Jack, an informant as well as a champion wrestler in the Alien City.FigZero 1/6 ULTRAMAN SUIT JACK (Anime Version) stands approximately 34.8cm tall, which is significantly large compared with threezero's previously released other ULTRAMAN SUITs, replicating its bulky looks as seen in the anime. It is a fully-articulated figure with approximately 45 points of articulation. The collectible has a detailed metallic paint application, and is constructed partially of die-cast zinc alloy. LED light-up features are installed at the eyes and the Color Timer on the chest.The weapon included with this item is a pair of swords to attach to the forearms. Other accessories include two pairs of interchangeable hands: One pair of fists and one pair of posed hands.Requires AG13 (LR44) batteries x 2 (Batteries Not Included).

threezero proudly presents the latest addition to the FigZero series, the Ultraman Tiga Multi Type action figure, faithfully recreating the classic Tokusatsu Hero. The figure stands approximately 32 cm tall and features threezero's newly developed seamless body with inner frame structure made of stainless steel, enhancing joint articulation and suit fit for improved playability. Fabric overlay technology replicates the texture of the costume as seen in the live action series. Equipped with LED light-up eyes and a chest Color Timer with three lighting modes- blue always-on, red slow-flash, and red rapid-flash-it accurately depicts Tiga's energy states. An integrated sound system plays the timer countdown sound and two battle shouts, alongside the lighting effects to recreate iconic scenes from the series. FEATURES - Features threezero's newly developed seamless body with inner frame structure made of stainless steel - Fabric overlay technology replicates the texture of the costume as seen in the live action series - Equipped with LED light-up eyes and a chest Color Timer with three lighting modes # - Features integrated sound system # - Approximately 32 cm in height - Approximately 36 points of articulation ACCESSORIES - 1 Color Timer (transparent) - 1 Color Timer (blue) - 1 Zeperion Beam - 5 kinds of interchangeable hands: one (1) pair of relaxed hands, one (1) pair of fists, one (1) pair of chop hands, one (1) pair of Zeperion Beam hands, and one (1) Zeperion Beam right hand for assembling the Zeperion Beam - 1 figure stand Requires AG13 batteries x 2 (Batteries Not Included) IN DEVELOPMENT / NOT FINAL. MAY DIFFER FROM THE FINAL VERSION

A new ROBO-DOU Voltron variant has arrived with an electroplating silver finish that faithfully revives the charm of retro toys! From the extremely popular 80's series Voltron: Defender of the Universe, ROBO-DOU Voltron has taken the world by storm, and the remarkable ROBO-DOU Voltron (Retro Toy Edition) is now available, paying homage to the first released Voltron collectible in 1981!Accurately following the path of its predecessor, ROBO-DOU Voltron (Retro Toy Edition) is a non-scale, fully-articulated figure standing approximately 27cm (~10.6") tall in Voltron mode with a remarkable die-cast main frame. This collectible variant maintains the robot's iconic retro aesthetic with an impressive electroplating silver finish to emphasize on the nostalgia of the classic mecha look. This Retro Toy Edition includes two exclusive sets of metallic decal sticker sheets, recalling the enjoyable experience in hand-detailing collectibles of the past; while the remaining set of stickers can be used on the previously released ROBO-DOU Voltron series items. The classic Voltron is recreated utilizing ROBO-DOU engineering to achieve a wider range of articulation and better combining functions than its contemporaries. ROBO-DOU Voltron (Retro Toy Edition) is composed of five Lion mecha, and is able to split into Lion mode, or combine to form Voltron. All five Lion mecha are fully-articulated figures partly adopting zinc alloy and metal parts for the movable joints. Combined, the figure utilizes 124 points of articulation for the total of five machines, with a set of Voltron mode weapons in addition to a unique set of weapons for each Lion.Features- Approximately 27cm (~10.6") tall- Fully-articulated figure with 124 points of articulation (Black Lion: 34 points of articulation, Red Lion: 25 points of articulation, Green Lion: 25 points of articulation, Yellow Lion: 20 points of articulation, Blue Lion: 20 points of articulation)- Die-cast metal parts- Electroplating silver paint, paying homage to the retro toy- Five separate Lion mecha combine to form Voltron- Rolling cutter on legs- Includes two (2) exclusive sets of metallic decal sticker sheetsVoltron mode weapons:- Blazing Sword- Spinning Laser Blade with HandleBlack Lion weapons:- Mouth Blade- Rotary CannonsRed Lion weapons:- Mouth Blade- Plasma Flash Cannon- Lava CannonGreen Lion weapons:- Mouth Blade- Laser Cannon- Shooting StarYellow Lion weapons:- Mouth Blade- Dual Shoulder Blockbuster Turrets- Radial Shotgun Blaster Blue Lion weapons:- Mouth Blade- Triple Barrel Mortar Cannon- Shoulder Cannon