Jurassic Park

This officially licensed statue of "Jurassic Park" is made of Polyresin. The 1/10 scale statue measures approx. 28 cm.

The formidable Tyrannosaurus Rex from the Jurassic Park franchise is brought to life in this finely sculpted diorama.The case can be removed and the dinosaur is also removable from base. The diorama measures approximately 7 inches tall.Collect all 3 dinosaurs - Tyrannosaurus Rex, Velociraptor and Dilophosaurus!

Resin statue, 1/10 scale, approx. 80 cm on base under official licence.

A piercing cry echoes through the Isla Sorna. The ferocious Tiger Stripe Raptor, brought to life in 1/6 scale. Set on the isolated Isla Sorna, where proliferating dinosaurs bare their fangs against mankind, "The Lost World: Jurassic Park" marked the second entry in the saga directed once again by visionary Steven Spielberg. From this film, the Velociraptor now joins the Legacy Museum Collection. To call for help, Ian, Sarah, and Kelly make their way to the Isla Sorna communications center-only to be confronted by a swift and relentless predator. Captured in 1/6 scale, this statue portrays the very first raptor to emerge from the pack, glaring at Ian and unleashing a piercing cry, drawn from one of the film's most suspenseful moments. The compact yet agile physique has been sculpted with meticulous detail, from the textured skin to the taut musculature. Its signature Tiger Stripe pattern is faithfully recreated: greige tones visible along the underbelly and elsewhere are layered with orange, over which flow sleek black stripes. Vertical pupils gleam within yellow eyes, a blood-red tongue flickers in the maw, and sharp claws extend in readiness-every detail radiates primal ferocity. The specially designed base evokes the front of the communications center, with a fallen log sprawled across the scene. A shattered car-door window, corroded tires, and scattered wreckage vividly recall the raptor's showdown with Ian. Brought to life together with the film's unforgettable imagery, the ferocious Tiger Stripe Raptor captures the tension of the Isla Sorna and makes a striking addition to your collection. Product Specifications: - The Lost World: Jurassic Park -themed Base

A piercing cry echoes through the Isla Sorna. The ferocious Tiger Stripe Raptor, brought to life in 1/6 scale. Set on the isolated Isla Sorna, where proliferating dinosaurs bare their fangs against mankind, "The Lost World: Jurassic Park" marked the second entry in the saga directed once again by visionary Steven Spielberg. From this film, the Velociraptor now joins the Legacy Museum Collection. To call for help, Ian, Sarah, and Kelly make their way to the Isla Sorna communications center-only to be confronted by a swift and relentless predator. Captured in 1/6 scale, this statue portrays the very first raptor to emerge from the pack, glaring at Ian and unleashing a piercing cry, drawn from one of the film's most suspenseful moments. The compact yet agile physique has been sculpted with meticulous detail, from the textured skin to the taut musculature. Its signature Tiger Stripe pattern is faithfully recreated: greige tones visible along the underbelly and elsewhere are layered with orange, over which flow sleek black stripes. Vertical pupils gleam within yellow eyes, a blood-red tongue flickers in the maw, and sharp claws extend in readiness-every detail radiates primal ferocity. The specially designed base evokes the front of the communications center, with a fallen log sprawled across the scene. A shattered car-door window, corroded tires, and scattered wreckage vividly recall the raptor's showdown with Ian. This bonus edition includes a Fossilized Sickle Claw (Display Model), evoking the terror of a raptor's hunt as it strikes from the grass. A true collector's item. Brought to life together with the film's unforgettable imagery, the ferocious Tiger Stripe Raptor captures the tension of the Isla Sorna and makes a striking addition to your collection. Product Specifications: - The Lost World: Jurassic Park -themed Base - 1 x Fossilized Sickle Claw (Display Model) [BONUS PART]

“This is good! Here we are on the worst place on Earth, and we’re not even getting paid!” – Dr. Alan Grant Prime 1 Studio is proud to include another iconic dinosaur to our Prime Collectible Figure Series: The 1/38 Scale Spinosaurus from Jurassic Park III! In the last movie of the original Jurassic Park series, Jurassic Park III introduced a worthy contender to the dinosaur title: our almost 9.5-inch-tall Spinosaurus! Largest of all the known carnivores, this hulking predator was bigger than the T-Rex and more than a match for its ferocity! Prime 1 Studio has engaged our sculptors and painters to bring this ‘spine lizard’ to realistic life with their incredible skills and artistry. Our sculptors have taken great care to sculpt lifelike, crocodilian skin, menacing teeth, and an impressive sail into this amazing carnivore. Additionally, our painters have supplemented this excellent sculpt with the subtle hues and coloration of the Spinosaurus from the film. Most of all, this dinosaur will fit in perfectly with the Tyrannosaurus Rex and the Carnotaurus from our Prime Collectible Figures Series. Spinosaurus stands on a textured earthen base, emblazoned with Jurassic Park III’s logo, featuring the usurper himself! Spinosaurus allows you to complete the 1/38 Scale dinosaur collection! So, hurry and preorder your copy today!

Product Specifications:
- Jurassic Park III-themed base with logo

A crumbling aviary, ruled by winged predators. The terror of being hunted-sculpted in breathtaking detail. A boy goes missing, and a rescue mission plunges once more into the perils of Isla Sorna. From "Jurassic Park III", the third installment of the legendary franchise released in 2001, the Pteranodon joins the Legacy Museum Collection. A chilling scene unfolds in the mist-screams pierce the air as the child is snatched into a nesting ground echoing with shrill cries. Inspired by the terror Eric experienced, this 1/6 scale statue captures the world of the winged predators in stunning detail. The adult Pteranodon folds its vast wings as it watches over the nest below. The hungry juveniles push forward, mouths open in desperation. The composition evokes a powerful sense of species-driven unity, delivering the message that this is no place for humans-and that the viewer, too, is seen as prey. From the razor-sharp beak and prominent cranial crest to the sinewed texture of its back, every detail of the adult is rendered with striking realism. The wing membranes are brought to life through intricate sculptwork and a paint application rich in shadow and tone. The juveniles feature softer body proportions and thinner wings, with wide, expressive eyes that suggest both innocence and threat. The base, adorned with rusted steel frames, decayed nesting debris, and a scattered skulls, completes the scene with a heightened sense of realism. A faithful embodiment of the film's primal terror-the Pteranodon returns, for every Jurassic fan who has long awaited the threat from above. Product Specifications: - Jurassic Park III-themed Base

A crumbling aviary, ruled by winged predators. The terror of being hunted-sculpted in breathtaking detail. A boy goes missing, and a rescue mission plunges once more into the perils of Isla Sorna. From "Jurassic Park III", the third installment of the legendary franchise released in 2001, the Pteranodon joins the Legacy Museum Collection. A chilling scene unfolds in the mist-screams pierce the air as the child is snatched into a nesting ground echoing with shrill cries. Inspired by the terror Eric experienced, this 1/6 scale statue captures the world of the winged predators in stunning detail. The adult Pteranodon folds its vast wings as it watches over the nest below. The hungry juveniles push forward, mouths open in desperation. The composition evokes a powerful sense of species-driven unity, delivering the message that this is no place for humans-and that the viewer, too, is seen as prey. From the razor-sharp beak and prominent cranial crest to the sinewed texture of its back, every detail of the adult is rendered with striking realism. The wing membranes are brought to life through intricate sculptwork and a paint application rich in shadow and tone. The juveniles feature softer body proportions and thinner wings, with wide, expressive eyes that suggest both innocence and threat. The base, adorned with rusted steel frames, decayed nesting debris, and a scattered skull, completes the scene with a heightened sense of realism. This bonus version includes a special display model of a Pteranodon baby. With wings spread in a menacing pose, it recalls the moment Eric is surrounded and threatened. A must-have item that pulls the film's world even closer. A faithful embodiment of the film's primal terror-the Pteranodon returns, for every Jurassic fan who has long awaited the threat from above. Product Specifications: - Jurassic Park III-themed Base - 1 x Pteranodon Baby (Display Model) [BONUS PART]

A hand-painted plastic diorama of a Raptor egg. The birth of a baby Raptor.

“Blue, come with me. We’ll take you to a safe place, okay?” – Owen Grady to Blue

Prime 1 Studio is happy to announce the addition of what could possibly be the most famous Velociraptor in the history of cinema to our Prime Collectible Figure Series: The 1/10 Scale Blue from Jurassic World!

Our team is extremely proud to reveal this impressive 14-inch-long by almost 7-inch-tall fan-favorite dinosaur from Jurassic World! Blue stands pensive and anticipatory with her open-mouthed pose - her rippling saurian muscles set against her tactile carapace. Prime 1 Studio’s sculptors have spent much time and effort in crafting a Velociraptor that is as realistic as possible: from her teeth filled head, to every bump and wrinkle of her leatherlike skin, to her whiplash tail, Blue does not disappoint. And her unique coloration has been captured perfectly by our painters: from her pale gray body to the telltale blue striping that gives this breathtaking raptor her name. Likewise, Blue’s most captivating and disturbing feature, her piercing, yellow eyes, have been recreated for your amazement and enjoyment!

Blue stands on a textured earthen base, emblazoned with Jurassic World’s logo, so you will always remember where Blue escaped from!

You will undoubtedly want to collect as many Jurassic World dinosaurs as possible! Blue already disappeared into the wild. So hurry and procure your 1/10 Scale Blue figure before she disappears from stores!

Product Specifications:
- Jurassic World-themed base with logo

Crafted in high-quality resin and meticulously hand-painted, this Icons scale figure showcases the fearsome dinosaur in lifelike detail. A thrilling addition for fans of Jurassic World and dinosaur enthusiasts. Height: 18 cm

A tail that thrashes the water. Jaws that chase the prey. Capturing the ocean's predator at nearly one meter in scale. From the fourth installment of the series released in 2015, "Jurassic World," the Mosasaurus returns to the Legacy Museum Collection. Five years after the release of the statue that captured its iconic leap from the massive pool, it now resurfaces with an all-new underwater theme. The powerful tail rising above the water and the composed pursuit of its prey were conceived with reference to scenes and key visuals from the film. Designed at 1/15 scale, it embodies the image of an absolute apex predator. Measuring nearly one meter in length, the piece is infused with meticulous sculpting and paintwork down to the finest details. The wide-open jaws reveal razor-sharp teeth and the lifelike texture of its membranes. The thick, rugged skin is rendered with a natural irregular pattern, while layers of bluish-gray tones recreate the shifting reflections of underwater light. The dynamic spray at the tail, crafted in clear parts with varying angles and hues, evokes the vast ocean beyond the base itself. The specially designed base illustrates the ecosystem of the lagoon in striking detail: red and blue corals, schools of fish swimming alongside the predator, and a great white shark fleeing in desperation. The Jurassic World title logo on the front completes the display, drawing viewers into the film's world. An achievement of sculptural expression, this monumental ocean predator commands a presence like no other-ready to become the centerpiece of your collection. Product Specifications: - Jurassic World-themed Base

A tail that thrashes the water. Jaws that chase the prey. Capturing the ocean's predator at nearly one meter in scale. From the fourth installment of the series released in 2015, "Jurassic World," the Mosasaurus returns to the Legacy Museum Collection. Five years after the release of the statue that captured its iconic leap from the massive pool, it now resurfaces with an all-new underwater theme. The powerful tail rising above the water and the composed pursuit of its prey were conceived with reference to scenes and key visuals from the film. Designed at 1/15 scale, it embodies the image of an absolute apex predator. Measuring nearly one meter in length, the piece is infused with meticulous sculpting and paintwork down to the finest details. The wide-open jaws reveal razor-sharp teeth and the lifelike texture of its membranes. The thick, rugged skin is rendered with a natural irregular pattern, while layers of bluish-gray tones recreate the shifting reflections of underwater light. The dynamic spray at the tail, crafted in clear parts with varying angles and hues, evokes the vast ocean beyond the base itself. The specially designed base illustrates the ecosystem of the lagoon in striking detail: red and blue corals, schools of fish swimming alongside the predator, and a great white shark fleeing in desperation. The Jurassic World title logo on the front completes the display, drawing viewers into the film's world. As an exclusive bonus item, this edition includes the skull of the Indominus Rex, a display model that recalls the climactic battle from the movie. An achievement of sculptural expression, this monumental ocean predator commands a presence like no other-ready to become the centerpiece of your collection. Product Specifications: - Jurassic World-themed Base - 1 x Indominus Rex skull (Display Model) [BONUS PART] Limited to 350 pieces

A striped sail at the surface, a massive tail below. The semi aquatic carnivorous dinosaur emerges in 1/15 scale. To collect DNA from the three most iconic dinosaurs, an expedition enters a forbidden island in "Jurassic World: Rebirth of the Earth". From this blockbuster that ushers in a new chapter for the series, Spinosaurus joins the Legacy Museum Collection. Spinosaurus returns to the screen as a semi aquatic dinosaur. This statue presents its newly reinterpreted form alongside the seascape. Its oar-like tail and four water gripping legs were posed after a close analysis of its on screen appearances. Contact points with the water’s surface and rocky terrain also create a sense of buoyancy, capturing its powerful swim. A moist texture deep inside its wide open jaws. The iconic vertical stripes, tinted with a weathered orange. Webbing developed on the hind feet. Taking full advantage of the immense presence of 1/15 scale, every detail is finished to a high level of definition. Layered colors and textures across the skin create a rich, realistic surface, while scars carved throughout the body evoke a story beyond human understanding. The specially designed base, shimmering with sunlight, is inspired by an untouched sea. Mottled, weathered rocks, fish with a beautiful sheen, and vivid red crabs—each sculpt and color is carefully refined to create a wild scene worthy of a dinosaur’s habitat. Delivered in a commanding size with meticulous three dimensional craftsmanship, this Spinosaurus brings the thrill of the sea to your collection. Product Specifications: - Jurassic World Rebirth-themed Base

A striped sail at the surface, a massive tail below. The semi aquatic carnivorous dinosaur emerges in 1/15 scale. To collect DNA from the three most iconic dinosaurs, an expedition enters a forbidden island in "Jurassic World: Rebirth of the Earth". From this blockbuster that ushers in a new chapter for the series, Spinosaurus joins the Legacy Museum Collection. Spinosaurus returns to the screen as a semi aquatic dinosaur. This statue presents its newly reinterpreted form alongside the seascape. Its oar-like tail and four water gripping legs were posed after a close analysis of its on screen appearances. Contact points with the water’s surface and rocky terrain also create a sense of buoyancy, capturing its powerful swim. A moist texture deep inside its wide open jaws. The iconic vertical stripes, tinted with a weathered orange. Webbing developed on the hind feet. Taking full advantage of the immense presence of 1/15 scale, every detail is finished to a high level of definition. Layered colors and textures across the skin create a rich, realistic surface, while scars carved throughout the body evoke a story beyond human understanding. The specially designed base, shimmering with sunlight, is inspired by an untouched sea. Mottled, weathered rocks, fish with a beautiful sheen, and vivid red crabs—each sculpt and color is carefully refined to create a wild scene worthy of a dinosaur’s habitat. The Bonus Version also includes a vignette that captures a chilling ocean moment. A striped sail rises with a burst of spray as it closes in around a boat—experience the fear that Zora and her team felt. Delivered in a commanding size with meticulous three dimensional craftsmanship, this Spinosaurus brings the thrill of the sea to your collection. * Limited to 350 pieces worldwide. Product Specifications: - Jurassic World Rebirth-themed Base - 1 x Vignette "Spinosaurus Sail" [BONUS PART]

This officially licensed resin statue of Steven Spielberg's "Jurassic World".

A gaze of intelligence. An iconic stripe along her back. The heroine bridging humans and dinosaurs, in a 1/2 scale monument. From the 2018 film ""Jurassic World: Fallen Kingdom,"" the Velociraptor Blue joins the Legacy Museum Collection in an impressive 1/2 scale. As the heroine of a grand story spanning three films, Blue left a lasting impression on audiences. This statue stands as a monument honoring her presence, bringing together the techniques and experience gained from creating her in various forms, all poured into a massive piece measuring nearly 120 cm in length. Her intelligent eyes pursue a sense of depth through a layered structure. From the elongated pupils to subtle light reflections, every detail is carefully rendered to convey her gaze. The scales and wrinkles across her body are sculpted with organic, irregular textures. Paintwork that skillfully balances matte and gloss finishes highlights the contrast between moist and dry skin, while the stripe along her back is crafted with careful attention to saturation and tonal variation to reflect the film's coloration. The specially designed base, inspired by a forest setting, is rendered with a level of detail made possible by the large scale. Finely sculpted rock surfaces and vegetation evoke the stage of reunion and farewell. A symbol of the bond between humans and dinosaurs, rendered in high detail at 1/2 scale. Presented to fans around the world who cherish the Jurassic series. Product Specifications: - Jurassic World: Fallen Kingdom-themed Base

A gaze of intelligence. An iconic stripe along her back. The heroine bridging humans and dinosaurs, in a 1/2 scale monument. From the 2018 film ""Jurassic World: Fallen Kingdom,"" the Velociraptor Blue joins the Legacy Museum Collection in an impressive 1/2 scale. As the heroine of a grand story spanning three films, Blue left a lasting impression on audiences. This statue stands as a monument honoring her presence, bringing together the techniques and experience gained from creating her in various forms, all poured into a massive piece measuring nearly 120 cm in length. Her intelligent eyes pursue a sense of depth through a layered structure. From the elongated pupils to subtle light reflections, every detail is carefully rendered to convey her gaze. The scales and wrinkles across her body are sculpted with organic, irregular textures. Paintwork that skillfully balances matte and gloss finishes highlights the contrast between moist and dry skin, while the stripe along her back is crafted with careful attention to saturation and tonal variation to reflect the film's coloration. The specially designed base, inspired by a forest setting, is rendered with a level of detail made possible by the large scale. Finely sculpted rock surfaces and vegetation evoke the stage of reunion and farewell. The Bonus Version includes a logo stand engraved with a three-toed footprint. Its iconic colors and three toes gripping the ground make it a collector's item that calls to mind her journey. A symbol of the bond between humans and dinosaurs, rendered in high detail at 1/2 scale. Presented to fans around the world who cherish the Jurassic series. Product Specifications: - Jurassic World: Fallen Kingdom-themed Base - Footprint Logo Stand [Bonus Part] Limited to 300 pieces

“These creatures were here before us. And if we’re not careful, they’re gonna be here after...We’ve entered a new era. Welcome to Jurassic World.” – Dr. Ian Malcolm Prime 1 Studio is incredibly excited to reveal the King of Dinosaurs in the Prime Collectible Figure Series: The 1/38 Scale Tyrannosaurus Rex from Jurassic World: Fallen Kingdom! 2018’s Jurasic World: Fallen Kingdom unleashed dinosaurs into the world and Prime 1 Studio is unleashing our saurian creations into yours! Feast your eyes on the Tyrannosaurus Rex! Caught mid-roar by our incredibly artful sculptors, this T-Rex is presented in its full, prehistoric glory! Even at this smaller scale (9 inches tall), the precise sculpting of the T-Rex’s hide and anatomy is exacting and exquisite. Each wrinkle, bump and its distinctive scar is meticulously placed to show off the creature’s personality, attitude and character. From painting the cold, yellow eyes, to the sharp, moist teeth...our talented painters have rendered this T-Rex as close to screen-accurate as possible. If you look closely, you’ll see the subtle shading and striping of this T-Rex that perfectly portrays its natural coloring according to the film. To assist with the magnificence and portability of this terror lizard, we have equipped it with a minimal rock base to show off the T-Rex as the main event. Lastly, we have also added a handsome Jurassic World plaque behind its feet. The portable size and attractive price of the Jurassic World: Fallen Kingdom Tyrannosaurus Rex will not only make it a sought-after piece, but makes it a great first foray into collecting the whole series! Don’t wait, get yours today!

Product Specifications:
- Jurassic World: Fallen Kingdom-themed base with plaque

This officially licensed resin statue of Steven Spielberg's "Jurassic World".

"The T-Rex exists on this planet for the first time in tens of millions of years and the only way you can express yourself is to kill it?" - Nick Van Owen Prime 1 Studio is proud to present an amazing addition to our Legacy Museum Collection Jurassic Park Series of statues: the 1:15 Scale LMCJP-09: T-REX CLIFF ATTACK from THE LOST WORLD: JURASSIC PARK! This breathtaking 21-inch-tall T-Rex Cliff Attack diorama statue portrays a pivotal moment in the film where Eddie Carr is trying to save Dr. Ian Malcolm and Dr. Sarah Harding, from plummeting to their deaths into the cold, dark seas of Isla Sorna! But fate has another plan for Eddie for the T-Rexes have arrived! Prime 1 Studio has chosen this tense, life-or-death situation as the moment to immortalize in T-Rex Attack! Prime 1 Studio's sculptors have composed an elaborate diorama scene which finds two adult T-Rexes at the moment they realize that there's a delicious snack to be had inside this curious, metal container. Prepare to be fully immersed in this pulse-pounding scene, as you take in all the textures, colors, and environmental details of this breathtaking diorama. Each T-Rex was sculpted by a master studio sculptor, and imbued with powerful theropod life, to illicit the exact emotions a 15,000 pound, 40 foot dinosaur would illicit. In this diorama, they have been stalking, and have walked up to a miniscule contraption, attracted by the noise and movements inside. The T-Rex couple and the Jurassic Park SUV with LED-Powered Lights inhabit a lush, wet portion of Isla Sorna, situated dangerously close to a cliff. Observe the quality of the trees, the plants, mud, and water puddles. The way the glossy finish of the rain makes the scales and muscles of the T-Rexes look. The careful, exacting painting style of the Studio is clearly evident in how well this moment is rendered. This fantastic diorama is finished off with a wonderful platform depicting fossilized dinosaur skeletons, encased within the Earth...where they were less dangerous! Add to your family of Jurassic Park statues now by Pre-ordering this fantastic LMCJP-09: T-Rex Cliff Attack from The Lost World: Jurassic Park! [Product Specifications] - Statue Size approx. 21 inches tall and 69 inches wide H:53cm W:69cm D:99cm - LED illumination on Jurassic Park Sport Utility Vehicle - Isla Sorna Cliffside-inspired Environmental Base

"The T-Rex exists on this planet for the first time in tens of millions of years and the only way you can express yourself is to kill it?" - Nick Van Owen Prime 1 Studio is proud to present an amazing addition to our Legacy Museum Collection Jurassic Park Series of statues: the 1:15 Scale LMCJP-09S: T-REX CLIFF ATTACK BONUS VERSION from THE LOST WORLD: JURASSIC PARK! This breathtaking 21-inch-tall T-Rex Cliff Attack Bonus Version diorama statue portrays a pivotal moment in the film where Eddie Carr is trying to save Dr. Ian Malcolm and Dr. Sarah Harding, from plummeting to their deaths into the cold, dark seas of Isla Sorna! But fate has another plan for Eddie for the T-Rexes have arrived! Prime 1 Studio has chosen this tense, life-or-death situation as the moment to immortalize in T-Rex Attack! Prime 1 Studio's sculptors have composed an elaborate diorama scene which finds two adult T-Rexes at the moment they realize that there's a delicious snack to be had inside this curious, metal container. Prepare to be fully immersed in this pulse-pounding scene, as you take in all the textures, colors, and environmental details of this breathtaking diorama. Each T-Rex was sculpted by a master studio sculptor, and imbued with powerful theropod life, to illicit the exact emotions a 15,000 pound, 40 foot dinosaur would illicit. In this diorama, they have been stalking, and have walked up to a miniscule contraption, attracted by the noise and movements inside. The T-Rex couple and the Jurassic Park SUV with LED-Powered Lights inhabit a lush, wet portion of Isla Sorna, situated dangerously close to a cliff. Observe the quality of the trees, the plants, mud, and water puddles. The way the glossy finish of the rain makes the scales and muscles of the T-Rexes look. The careful, exacting painting style of the Studio is clearly evident in how well this moment is rendered. This fantastic diorama is finished off with a wonderful platform depicting fossilized dinosaur skeletons, encased within the Earth...where they were less dangerous! And when you pre-order this Bonus Version from our official online store or any authorized distributor will you receive a cool, extra Bonus Part: an adorable T-Rex Baby Dinosaur on her own base! She's the very thing her parents were looking for! Add to your family of Jurassic Park statues now by Pre-ordering this fantastic LMCJP-09S: T-Rex Cliff Attack Bonus Version from The Lost World: Jurassic Park! [Product Specifications] - Statue Size approx. 21 inches tall and 69 inches wide [H:53cm W:69cm D:99cm] - LED illumination on Jurassic Park Sport Utility Vehicle - Isla Sorna Cliffside-inspired Environmental Base - One (1) Freestanding T-Rex baby on her own Base [BONUS PART] - Limited to 500 pieces