Horror Statues

Trick or Treat Studios is proud to present the officially licensed, Halloween (1978) - Dr. Loomis 1:6 Scale Figure! This poseable figure is approximately 12" and has 30+ points of articulation. Fully clothed in a screen-accurate costume this figure arrives in a beautiful collector's box with a flip-back window display The figure includes: - 2 additional interchangeable hands - Trench coat - Revolver

Premium Collectibles Studio presents the Michael Myers Life-Sized Bust based on the classic 1978 horror film, Halloween. This 23.5" tall bust will bring an eerie atmosphere to any horror collection, combining an expertly sculpted recreation of Myers' iconic mask with high end finishes on the mixed media clothing and lifelike hair. Michael's head is cocked to the side just slightly giving him an unsettling, curious appearance sure to unnerve even the steeliest horror hound. Add the true face of evil to your collection and pick up the Michael Myers Life-Sized Bust by PCS today! Limited to 500 pieces.

Premium Collectibles Studio presents the Michael Myers Life-Sized Bust Deluxe Edition based on the classic 1978 horror film, Halloween. This 34.5" tall bust will bring an eerie atmosphere to any horror collection, combining an expertly sculpted recreation of Myers' iconic mask with high end finishes on the mixed media clothing and lifelike hair. Michael's head is cocked to the side just slightly giving him an unsettling, curious appearance sure to unnerve even the steeliest horror hound. The Deluxe Edition boasts a full torso allowing Michael to clutch his signature knife in his hand adding an extra layer of terror to this life-sized collectible. This version is situated on a simple museum style base measuring roughly 13" wide and 9"deep. Add the true face of evil to your collection and pick up the Michael Myers Life-Sized Bust Deluxe Edition by PCS today!

Trick or Treat Studios is proud to present the officially licensed, Halloween (2007) - Michael Myers 1:6 Scale Figure! This poseable figure stands approximately 13" tall and features 30+ points of articulation. Includes 5 additional hands, butcher knife and Judith Myers tombstone. Arrives in a beautiful collector's box with a flip-back window display. Add Rob Zombie's vision of Michael Myers to your collection, order now!

"Who is Michael Myers?Depicting the silent killer from the horror film "Halloween", written and directed by John Carpenter, Michael Myers appears as a psychopath with striking dark, emotionless eyes that peer through a white mask. A sociopath since the age of 6, when he murdered his older sister, Myers was confined for 15 years in a sanitarium in the fictional suburban town of Haddonfield, Illinois, where his psychiatrist, Dr. Samuel Loomis, described him as pure evil. Myers escapes on the night of Halloween and returns to his home to kill again. He murders three students and attempts to kill Laurie Strode, failing only because Dr. Loomis stops him by shooting him six times. Yet Myers escapes, returning in Halloween II (1981), where the story picks up right where the first movie left off. As Loomis and the police search for Michael throughout the town, he continues to take more victims, his goal being to kill Laurie. There is a reason for this twisted obsession, a motive even Loomis was unaware of. A pop culture icon, Myers and the Halloween franchise are widely regarded as classics of horror and among the most influential horror films of all time. Exploring the Michael Myers statue:On top Judith's grave, his older sister and also his first victim, with a large pumpkin carved with a skull face and a traditional bucket of candy fallen at his feet-references to the original movie poster where he is the antagonist and main character, as well as to the October 31st celebration-the cruel and merciless killer known as The Butcher of Haddonfield holds a knife in his right hand while carrying yet another victim, the corpse of a law enforcement officer, lifted by his jacket through the superhuman strength of his killer's left hand. Without reason, conscience, or understanding of good or evil, right or wrong, he is one of the most feared serial killers on screen and one of the most celebrated protagonists of contemporary horror. Iron Studios proudly presents its statue ""Michael Myers - Halloween 2 - Deluxe Art Scale 1/10,"" the relentless villain from the movie franchise that begun in 1978 by the legendary director John Carpenter. Figure details:The statue was produced with extreme attention and care, based on the official references, which ensures an impressive display of the figure in any environment. Special features:The statue Michael Myers - Halloween 2 - Deluxe Art Scale 1/10 will be produced in limited edition. The diorama base presents rich details inspired by the original references. Materials and finishing of the piece:Just like all the other statues manufactured by Iron Studios, the statue Michael Myers - Halloween 2 - Deluxe Art Scale 1/10 is made with high-quality materials such as Polystone and may contain parts in resin, PVC, metal, and fabric. For the finishing, the hand-painted statue ensures a unique and exclusive artistic touch to satisfy any collector. Expanding and reviving the line of statues inspired by the most feared and beloved monsters and villains from classic horror, suspense, and thriller cinema, Michael Myers was officially revealed on the special Halloween edition of the Inside Iron Studios Day. It is one of the most anticipated and desired items for fans and collectors in this category. Now available for Pre-order, check out other upcoming releases from Iron Studios on their social media and YouTube channel!"

This 8" figure is part of our new Scream Greats collection. Featuring highly detailed sculptures and paint perfect for display. Figure comes packaged in a blister on backing card. Figure includes alternative arm, knife and Jack-O-Lantern accessories.

Premium Collectibles Studio is proud to present the Halloween - Jack-O-Lantern Life-Size Collectible. First appearing in the opening credits of the classic 1978 slasher, Halloween, this distinctly carved pumpkin is faithfully recreated to bring an extra scare factor to your holiday decor. Featuring an LED light up candle to offer an eerie glow to your spooky set up, this jack-o-lantern is a must have for any Halloween fan. Carve out a place in your display and pick up the Halloween - Jack-O-Lantern Life-Size Collectible by PCS today!

"I saw a man in a mask" Nothing could stop Michael Myers from slashing his way into Youtooz! Like nothing... literally nothing... We can't stop him! Standing at 4.9 inches tall and holding a long kitchen knife in a raised right hand, his iconic lifeless grey mask with gaunt eyes and pursed lips covers his head with messy brown hair swept back. Dressed in dark blue overalls that have a popped collar over a black shirt, bright red blood pours from the multiple futile gunshots marking his body as he wears solid black work boots. The exterior of his packaging sees him looming over a sleeping figure laying in bed, while the black interior is covered in deep orange jack-o-lantern faces. The protective sleeve is then a splotchy dark grey with scratches running through it as his figure can be seen through the large clear window at the packaging's front. This collectible ships in a matte, embossed, protective outer sleeve and a custom-sized plastic protector for maximum protection during shipping. About Michael Myers: Michael Myers is the terrifying antagonist of the Halloween film series along with multiple novels, video games, and comics. An imposing near-immortal figure and embodiment of pure evil, Myers' has terrorised countless nights since his first appearance in 1978 making sure people question if someone's "just wearing a Halloween costume".

Premium Collectibles Studio is proud to present the Pinhead 1:3 Statue, based on the character from the classic horror film, Hellraiser. Standing nearly 31" tall, this fully sculpted resin statue comes hand painted and dripping with gory details. Pinhead is depicted holding the cryptic puzzle box in his hands with a vacant, otherworldly expression on his pale face. His blank expression is all the more unsettling with the addition of neatly arranged pins protruding from his entire head. Great effort was taken to recreate the incredible details of Pinhead's costume, from the intricately designed line work of the Hell Priest's floor length black vestments to the rusted torture devices hanging at his waist. Pinhead comes atop a base modeled after the transformed version of the puzzle box, the key that opened the way for the Cenobites to enter our dimension. Explore the furthest regions of experience pick up the Hellraiser: Pinhead 1:3 Statue by PCS today! Reign over your Marvel Games collection and pick up the Knull 1:3 Scale Statue by PCS today! Edition Size: TBD Size: 79 x 36 x 36 cm

Premium Collectibles Studio is proud to present the Pinhead 1:3 Statue Deluxe Edition, based on the character from the classic horror film, Hellraiser. Standing nearly 31" tall, this fully sculpted resin statue comes hand painted and dripping with gory details. Pinhead is depicted holding the cryptic puzzle box in his hands with a vacant, otherworldly expression on his pale face. His blank expression is all the more unsettling with the addition of neatly arranged pins protruding from his entire head. Great effort was taken to recreate the incredible details of Pinhead's costume, from the intricately designed line work of the Hell Priest's floor length black vestments to the rusted torture devices hanging at his waist. Pinhead comes atop a base modeled after the transformed version of the puzzle box, the key that opened the way for the Cenobites to enter our dimension. The Deluxe Edition also includes a swap out portrait with an intense clenched teeth expression offering an additional display option for collectors. Explore the furthest regions of experience pick up the Hellraiser: Pinhead 1:3 Statue Deluxe Edition by PCS today! Edition Size: 300 Size: 79 x 36 x 36 cm

Trick or Treat Studios and Severin Films are proud to present the Official Dr. Freudstein 12" Statue from Lucio Fulci's Classic conclusion to his Zombie trilogy, House By the Cemetery. Based on Dr. Freudstein as seen in Lucio Fulci's Zombie trilogy House By the Cemetery, Dr. Freudstein is icon in Italian Zombie Cinema. This highly detailed statue was sculpted by Master Bust Sculptor William Paquet. This incredible statue is made in resin and is 12" tall and to top it all off the House By the Cemetery Dr. Freudstein Statue comes in a beautiful Collectors Box.

- Officially licensed, hand-painted Figure- Material: Resin

"We all float down here" We didn't have to wait another 27 years for Pennywise to surface again, except this time it's for his Youtooz debut! Standing at 4.6 inches tall and holding a single red balloon that floats in front of his face, a sinister open smile reveals garish teeth as the red makeup from his mouth leads up and over his eyes to a cracking forehead. With long orange hair sweeping back from his face, he wears a white clown costume with a thick collar and red trim that matches the buttons on his front and the tops of long black feet. The exterior of his packaging sees a single red balloon floating through the silhouettes of dead trees. While the interior is covered in the worn red bricks of a sewer, this then continues onto the protective sleeve, where his figure can be seen through the large clear window at the packaging's front. This collectible ships in a matte, embossed, protective outer sleeve and a custom-sized plastic protector for maximum protection during shipping. About IT: IT is a horror novel written by Stephen King that has been adapted into a pair of films and two series. Set across two time periods in Derry, Maine, it follows 'The Losers Club' as they take on the evil shapeshifting entity Pennywise that preys on the town every 27 years.

- Contains: Jaws 3D Poster- Material: PVC- Size: 25 cm

This officially licensed statue of "Jaws" is made of Polyresin. The 1/10 scale statue measures approx. 27 cm. Addition: - Numbered

We are proud to present this amazing 1:4 Scale Statue of the Creeper - a flesh-eating ancient beast that resurfaces every 23 years to feed, stalking prey and collecting body parts since the most ancient of times, killing anyone and anything that is foolish enough to get in his way. This dynamic piece perfectly captures this demonic monster in full attack mode - charging forward with his Battle Axe raised high - ready to mercilessly decapitate or dismember his hapless victims. This incredibly detailed piece of art is constructed from heavyweight polystone, and then hand painted to the finest detail. Limited to 500 pieces.

Premium Collectibles Studio is excited to announce the Killer Klowns from Outer Space: Jumbo 1:4 Scale Premier Series Statue from the cult classic 1988 film and the first in a terrifying new line!Depicted in his fiendishly flamboyant costume, this creepy clown beckons his unsuspecting victims to their doom with his finger extended. Standing nearly 27" tall, Jumbo grins menacingly at his would-be victim, barely concealing a conspicuously colored mallet behind his back. Every inch of this terrifying extraterrestrial is covered in exquisite detail from his putrid portrait to his comically large clown shoes.The base is packed with details from the cult-classic film, like the Crazy House and Big-Top Burger, adding an extra layer of immersion to this next level collectible.Give your coulrophobia a field day and pre-order the Killer Klowns from Outer Space: Jumbo 1:4 Scale Premier Series Statue today!Product size: 68 x 43 x 43 cm

Gruss vom Krampus…

Sideshow presents the Krampus Statue, a new original horror collectible that reimagines a frightening figure of holiday folklore.

That chill running down your spine is more than just the Alpine atmosphere when Krampus is near! If you hear his bells and hoofbeats, it’s already too late. The Sideshow Originals Krampus Statue measures 19” tall x 13.19” wide x 12.28” deep (48.26 cm x 33.5 cm x 31.19 cm) and depicts the horrifying horned figure leaving a home with a wicker basket full of naughty children to punish. Beneath the snowcapped stairs, one last victim hides in hopes of escaping this rather un-festive fate.

The Krampus Statue is fully sculpted and captures all the lush accents of a wintery wonderland gone to hell. The circular base is inspired by traditional wood carvings, showing the monstrous figure chasing his victims with his claws outstretched. The wooden staircase and paved stones are covered with snow and finished with spot gloss that gives the scene a wet look. Pine cones and evergreen tinsel wrap the banister as Krampus makes his descent with one cloven hoof and one gnarled foot. Details like his massive teeth and tongue, his bundled switch, and even a Naughty List at his hip make this winter icon much more scary than merry — you’d better ho-ho-hope you’ve been good this year!

You certainly don’t want to find his presence waiting by the tree on Christmas morning. Collect the Sideshow Originals Krampus Statue for your holiday horror collection today.

Size: 48.26 x 33.5 x 31.19 cm (19" x 13.19" x 12.28")

This officially licensed resin statue is part of the "Art Scale" series. The 1/10 scale statue measures approx. 36 x 14 x 20 cm and comes with a matching base in a printed box.

"I am the shadow on the moon at night filling your dreams to the brim with light!"A quote on A Nightmare Before Christmas, a unique animation from the mind of Tim Burton, which still resonates with fans over 25 years on after it's release. With a thread and needle in hand, Beast Kingdom is back to the drawing board to create a one of a kind D-Stage release encapsulating all the fun and mayhem from the classic movie. Jack Skellington, (or affectionately known as the Pumpkin King) takes center stage on the latest Beast Kingdom D-Stage diorama. Incorporating elements from the film, the scene includes Jack's haunted house as well as an appearance from the cute yet spooky Zero the ghost dog himself! Finishing the figure is all manners of fiendish additions including spooky pumpkins and a scary gate with two prowling cats.With Disney's ever growing popularity, make sure to take home this ghoulie recreation of the classic animated movie today! The PVC diorama measures approx. 15 cm and comes in a plastic transparency blister box.

This officially licensed statue of "Nightmare before Christmas" is made of resin. The 1/10 scale statue measures approx. 39 x 19 x 32 cm and comes with a matching diorama base. With LED lighting.

The resin statue of Count Orlok in his iconic death scene from the film Nosferatu (1922) is a detailed and impressive replica of the most iconic of all vampires, which was fearsomely staged by Max Schreck. At 1/10 scale, Orlok is captured as a dark, eerie presence that reflects the spooky charm of the original film character. Count Orlok is depicted in his classic appearance, with a pale, almost ghostly complexion. His face, embodied by Schreck in one of the most sinister depictions of the vampire myth, is narrow and distorted, with sharp teeth that emphasize his demonic nature. The eyes are deep in the sockets and appear almost lifeless, creating an atmosphere of eeriness. The long fingers with pointed nails that he holds so characteristically in the film are also rich in detail and fit perfectly into the portrayal of the horror character. The statue is a masterful reproduction that not only captures the eerie character of Count Orlok, but also translates the atmosphere and horror of Nosferatu into an artful collectible. It is a must for fans of classic horror and for lovers of Nosferatu and Murnau's visionary direction. The statue comes with postcard, poster, cardboard diorama and certificate of authenticity.

The resin statue of Count Orlok on the deck of the "Demeter" from the film Nosferatu (1922) is a detailed and impressive replica of the most iconic of all vampires, which was fearsomely staged by Max Schreck. At 1/10 scale, Orlok is captured as a dark, eerie presence that reflects the spooky charm of the original film character. Count Orlok is depicted in his classic appearance, with a pale, almost ghostly complexion. His face, embodied by Schreck in one of the most sinister depictions of the vampire myth, is narrow and distorted, with sharp teeth that emphasize his demonic nature. The eyes are deep in the sockets and appear almost lifeless, creating an atmosphere of eeriness. The long fingers with pointed nails that he holds so characteristically in the film are also rich in detail and fit perfectly into the portrayal of the horror character. The statue is a masterful reproduction that not only captures the eerie character of Count Orlok, but also translates the atmosphere and horror of Nosferatu into an artful collectible. It is a must for fans of classic horror and for lovers of Nosferatu and Murnau's visionary direction. The statue comes with postcard, poster, cardboard diorama and certificate of authenticity.

Made from premium-quality resin and carefully hand-painted, this 1/10 scale collectible delivers impressive texture and realism, including an extra interchangeable head and hand to enhance your display possibilities. Extra Head and Extra hand. Height: 25 cm

Standing a very impressive 36" tall, this intricately detailed statue meticulously captures every aspect of the Jungle Hunter, with a dynamic pose that embodies the true essence of the Predator in his jungle environmentThis intricately detailed, Museum Quality statue is crafted from heavyweight polystone, then hand finished and individually hand painted to capture the smallest detail.Offered as a strictly Limited Edition of 500 individually numbered pieces worldwide, this stunning Predator statue would make a magnificent centerpiece for any Predator collection!

This officially licensed statue of "Predator: Badlands" is made of resin. The 1/10 scale statue measures approx. 26 x 16 x 15 cm. Special Feature: - Alternative head sculpt

From Stan Winston's creature feature "Pumpkinhead" comes this cool 1:10 scale statue made of high-quality polystone, measuring approx. 28 x 20 x 19 cm and limited to just 400 pieces.

From Stan Winston's creature feature "Pumpkinhead" comes this cool 1:4 scale statue made of high-quality polystone, measuring approx. 70 x 48 x 16 cm and limited to just 400 pieces. The Apex Edition comes with two additional interchangeable heads.

"I want to play a game"Jigsaw's main accomplice and icon of the film franchise comes to your shelf with the Trick or Treat Studios officially licensed Saw - Billy the Puppet 1:6 Scale Figure!This amazing figure is approximately 7" tall, features real hair, includes his tricycle and comes packaged in a collector's window box with a magnetic flap. Billy's feet clip onto the pedals for ease of display.Figure does not stand on its own.