kotobukiya

"The ninth release in the Megalomaria series is a character designed with the concept of a princess knight in mind. Along with the newly sculpted head and armor parts, this deluxe kit comes equipped with EXPANSION ARMOR Type E Dress Ver. and a VIRTUOUS STYLE SWORD featuring an exclusive color scheme. Newly Sculpted Parts: - Head (Tiara, Ribbon, Headgear, Visor, Base) - Armor (Shoulders, Knees, Ankles) - Skirt Armor Attachment Coloring: The coloring is based on Sousai Shojo Teien's Ritsuka Saeki, and uses the uniform color of St. Iris Gakuen Girls' High School as the armor color. A total of 10 different colors are used. Articulation Features: Like Principal, this kit features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent enough to allow the model to sit with one knee up. The knee armor can move independently and can be adjusted to various desired positions. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The Exarmor is inspired by a long apron dress and has 13 points of articulation. Each point has 3mm joints, meaning that they are highly versatile as parts for customization. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Combining the model with weapon units sold separately can turn the arms themselves into weapons, recreating a monster-like appearance. The normal wrist joints and spacer can be used freely to one's preference. Hands: Seven types of hands are included and consist of hands designed for holding swords and guns as well as knife-hand strike hands and multiple open hands. Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Green Glass. Included Items: - 1 x Green Glass Model- 1 x EXPANSION ARMOR Type E Dress Ver. Set - 1 x Bastard Sword (with Scabbard) Set - 1 x Longsword (with Scabbard) Set - 1 x Two Types of Sword Attachments - 1 x Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Point compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"The eighth character in the Megalomaria Unlimited Universe series is Fuma, a ninja-inspired character that leverages the wide range of movement of the marionnette style. This is a deluxe kit that comes with various items such as a sword, claws, shuriken, kunai, and a scarf. Exarmor Ninja Fox: Along with the eye-catching fox mask, the model comes with a headgear decorated with animal ears and a flashy scarf that can be attached using the ball joint at the base to allow for various expressions. The scarf can also be removed. The three claws on the three-point wrist joints can be articulated independently, enhancing the fun when creating expressive action poses. The sword can be attached to the back of the waist using a mount attachment. Articulation Features: This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. The head and neck joints are newly sculpted, and removing the cover on the side of the head reveals a 3mm joint for customization. In addition, the range of motion of the head has been increased thanks to the structure of the neck ball joint that slides both backwards and forwards. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The separately sold MEGALOMARIA M.S.G EX HAND UNIT [Female Type A] can be used to further expand the range of posing options. By using the open hand, the model can even perform a handstand! Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Fuma. By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts. Included Items: - 1 x Fuma Model - 1 x Scarf - 1 x Detail Cover for Display Without Scarf - 1 x Seven Types of Hand Parts - 1 x Sword - 1 x Sword Attachment Part - 2 x Shuriken - 2 x Kunai - 2 x Shuriken/Kunai Attachment Part - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"Introducing Grin Doll, a goblin-type Another fit for anything from comical to serious roles.This character was designed to fit the grunt position for users who want villains to match their heroes.The model features a newly designed head, arm armor, and three new weapons.Head:The head features a mask with an evil grin befitting the name Grin Doll. The head can be assembled with or without teeth.The unique long nose can also be removed to give the character a wholly different atmosphere. It also still features the ability to equip Sousai Shojo Teien face and bang parts.*Parts from Ao Gennai and Bukiko Kotobuki cannot be equipped as they use unique standards.Weapons:The kit includes a club, axe and machete. When displaying multiple models, equipping different weapons can give each character their own personality.The axe and machete can be equipped to the hard points around the body using the included 3mm connection joints.Articulation Features:The model features approximately 50 points of articulation throughout the body.The marionnette-style body means that it can be displayed in a wide range of poses, from serious to comical. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up.The shoulders are composed of multiple joints, allowing them to be pulled forward and the arms to be crossed.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances.The torso part also has an excellent range of motion, allowing the figure to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away.The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses.The figure has an incredible range of poses, from high kicks to sitting curled up.For the rear armor, there is also a single-piece version that isn't separated into left and right for whatever poses you can imagine.Included Items:- 1 x Grin Doll Model - 1 x Seven Types of Hand Parts- 1 x Club - 1 x Axe - 1 x Machete - 1 x Standard Wrist Joint and Spacer (Left and Right)- 2 x 3mm Joint - 1 x Single-Piece Rear Armor

"The sixth character in the MEGALOMARIA UNLIMITED UNIVERSE series is Mephisto, the much anticipated first male-body style character.Boasting an impressive 54 points of articulation, the model stands 180mm tall.Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses.The knee armor can move independently and can be adjusted to the desired position.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward.Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons.The normal wrist joints and spacer can be used freely to one's preference.Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands.Color Scheme:The model uses six colors; dark red, black, clear red, light gray, clear blue (partially translucent), and gold (partially translucent). Included Items:- 1 x Mephisto Model - 1 x Wrist Blades (Left and Right)- 1 x Seven Types of Hand Parts- 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"By popular demand from many users, the tenth MEGALOMARIA character is a prototype color version Mephisto. Color Scheme: The model uses three colors, HEXA black, HEXA grey, and clear turquoise green, a combination designed to match well with both M.S.G and HEXA GEAR. Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands. Included Items: - 1 x Mephisto Model - 1 x Wrist Blades (Left and Right) - Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

Introducing an all-new Grim Reaper-inspired boss character, Necro Face!Necro Face is a DX item equipped with the Curse Reaper (scythe) and Exarmor Necromancer armor.Exarmor Necromancer:This armor features hooded headgear and a removable skull mask.The base mask behind the skull mask has three eyes, with the third eye sculpted into the forehead. The eyes are movable, and the included tool or the end tip of the Curse Reaper (scythe) can be used to adjust the line of sight. The mask can be swapped out for face parts of other female-type Megalomaria and Sousai Shojo Teien characters.The unarmored visor can also be replaced with bangs parts from Sousai Shojo Teien characters. Even with the hood equipped, some characters' bangs parts can be attached. The bangs parts from Madoka Yuki, Emma Koishikawa, Koyomi Takanashi, Eimi Nijimura, and Short Wig can be equipped.*Not compatible with Ao Gennai and Bukiko Kotobuki's face and bangs parts.The four extended artificial limbs on the back are movable, and can be extended and retracted.The base is a 4mm ball joint, making it possible to attach female Megalomaria arms to create a six-armed character.The skirt-like pieces of armor are connected with ball joints and have multiple points of articulation, allowing for a wide range of dynamic poses.The extended artificial arms can also be removed and used as a mage's familiar.Curse Reaper:The Curse Reaper is a large weapon designed after the Grim Reaper's scythe. The blade is made with clear plastic and can be replaced to change its base Curse Reaper (scythe) form to the Magic Staff (staff) form.The bottom tip is + shaped and can be used to move the eyes of Necro Face's mask.Expansion Skin Parts:The expansion skin parts, which received a large response after they were first announced, have also been included to increase compatibility with female-body type plastic model kit series, such as Sousai Shojo Teien.The parts use the pale Skin Color C, which matches well with Sousai Shojo Teien's Kuon Yakushiji [Maria Kagaribi Costume].Articulation Features:The model features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up.The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances.The torso part also has an excellent range of motion, allowing the figure to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away.The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible.The right and left hip joints can move independently in all four directions, with extensive forward movement allowing users to recreate an incredible range of poses from sitting with legs crossed to high kicks to sitting curled up.For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely.Three-point Wrist Joints:The wrists are designed to bend inwards almost 180 degrees which allows the hard point to be brought forward. The Hysteria Blades included with Seeker and Grin Doll (sold separately) can be attached to the wrist armor.Included Items:Necro Face Model x1Skull Mask x1Seven Types of Hand PartsCurse Reaper (Scythe) x1Magic Staff Clear Parts x1Standard Wrist Joint and Spacer x1 (Left and Right)Single-Piece Rear Armor x1Expansion Skin Parts Skin Color C ×1 Set

"To make the heroes shine even more, the second vehicle-type item is here! A reliable partner for the Triggers who hunt Anothers, this is a large volume kit with a total length of approximately 248mm. The heavy two-wheeler Night Czar is a variation item made by changing up some of the design and coloring of Nights Superior. While it was designed to allow the larger Mephisto and Ghillie Dhu (height approx. 180mm) to ride, female body type Anothers (height approx. 160mm) can also ride it, so please enjoy the various combinations.Changes from Nights Superior- The front unit has been changed from one designed for Ghillie Dhu to a general-purpose design.- A license plate has been added to the rear of the bike.- The main color has been changed from Ghillie Dhu's black to Seeker's white.The exterior part uses 3 mm connections and the HEXA G-R.A.M system, allowing for easy removal and combination with other series.*This product is not part of the TOKYO Mark brand."

"Target Bloodless has been successfully restrained and its abilities removed." Valiant, an Another based on the concept of a police officer, is the first model from TOKYO Mark with tampography printed face parts, movable eyes, and an unmasked naked face part! The skin and eye parts are each painted. The well-received expansion skin parts are also included and can be combined with Sousai Shojo Teien models for more customization. Naked Face Part: This is the first kit in the series with movable eyes and a painted face. The eyes can be adjusted to look different ways using the included tool. Since the head is attached in the same way as other normal mask types, this model is compatible with Sousai Shojo Teien models. Normal Mask: Like previous Anothers, a mask with a mecha design is also included. The eyes are movable and the line of sight can be adjusted. It can also be attached to characters from the Sousai Shojo Teien series. *The naked face parts and normal mask are not compatible with Ao Gennai or Bukiko Kotobuki. EXARMOR VALIANT POLICE: Like Ruby Eye, this model also has a cosplay-style exarmor outfit. Her hat is removable and has 3mm connection points. The clear red visor attached to the head gear is removable. The receiver unit extending from the side of her head has two modes: active mode and passive mode. With six pieces of armor on the front, back, left, and right that can be adjusted individually, the miniskirt armor allows for aggressive action poses. The sleeve armor can be taken off and swapped out with shackles. The optional chain can connect the handcuffs and the large handcuff-shaped blades. Handcuff-Shaped Blades: Isolator Firewall The main weapon is based on a large pair of handcuffs. These handcuffs are a slashing weapon that can also serve as a restraining tool, sealing a criminal's special abilities. They can be linked together using the optional chain. Articulation Features: The best feature of this series is the approximately 50 points of articulation throughout the body. The six pieces of the miniskirt armor can be moved individually, allowing the model to be posed in a wide variety of actions, from quiet poses like kneeling or sitting cross-legged to high kicks and poses with weapons. Included Items: Valiant Model ×1 Naked Face ×1 Eye Adjustment Tool ×1 Normal Mask ×1 Isolator Firewall (Handcuff-Shaped Blade) ×2 Red Baton ×1 Taskill (Gun) ×1 Holster ×1 Back Mount Rack ×1 Optional Chain (255mm) ×1 Shackles x2 Standard Wrist Joint and Spacer x1 (Left and Right) Single-Piece Rear Armor x1 Expansion Skin Parts Skin Color A ×1 Set

"The eleventh character in the Megalomaria Unlimited Universe series is Zekuu! Designed with the concept of a tengu in mind, Zekuu joins Fuma as a character with a Japanese theme.The wings, fan, and staff option parts come together to give this deluxe item a distinctive silhouette. The mask includes the same movable eye feature as Principal, with an adjustable line of sight. The eyes can be adjusted in any direction using the handle of the included fan.Exarmor Black Crow:The clear parts designed after a beak can be removed from the visor. The voluminous wings can be flexibly positioned using the large three-point wrist joint, allowing for extravagant action poses.The talons attached to the ankle parts are also movable and can be changed to Hunting Mode. Part of the geta can also be changed to create High Geta Mode.Articulation Features:This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. Including the Exarmor, there are more than 70 points of articulation. The knee joint is comprised of a single layer of joints, allowing the model to sit with one knee up, its legs crossed, and various other action poses.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed staff stances.The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The right and left hip joints can move independently in all four directions, with extensive forward movement allowing users to recreate an incredible range of poses from high kicks to sitting curled up.For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely.Compatibility of Heads and Masks:The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so they can be used interchangeably.The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet.The eyes can look in all directions and be adjusted by using the handle of the included fan.*Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Zekuu.By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts.Included Items:- 1 x Zekuu Model - 1 x Seven Types of Hand Parts- 1 x Wings (Left and Right)- 1 x Staff - 1 x Fan - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"The series' first male-body style character with a bare face joins the lineup! Zirconia is a character designed based on the image of a male-body type Seeker. Despite its simple armaments, it's a design that allows the marionnette style's action gimmicks to be fully enjoyed. Life-like Head Part: The newly sculpted parts are newly designed by Kodama, with the head part in particular being carefully crafted down to the hair as in the Sousai Shojo Teien series. The pre-painted face part, Naked Face, comes with movable eyes, and the included tool can be used to change the line of sight in accordance with various action poses. *The face part uses a unique design, and is not compatible with Mephisto or Ghillie Dhu. Articulation Features: Zirconia has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Large Arm Blade: The base of the Arm Blade can be rotated, allowing the blade to be pointed forwards. The connection joints are 3mm in diameter, allowing the blade to be attached to other characters. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Zirconia features larger joints than female-body style characters, such as Principal, allowing Zirconia to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords and hands for holding guns as well as clenched fists and multiple open hands. Color Scheme: The model uses eight colors: off-white, white, light gray, gray, stone gray, black, and clear black. Included Items: - 1 x Zirconia Model - 1 x Arm Blade - 1 x Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

Vanguard Leader is a Valiant variation kit based on the concept of a commanding officer or an instructor. This kit comes with two types of face parts, a mecha-style normal mask and naked face parts. Users can mix and match to create their preferred style. Naked Face Parts: This kit has movable eyes and a painted face. The eyes can be adjusted to look different ways using the included tool. Since the head is attached in the same way as other normal mask types, this model is compatible with Sousai Shojo Teien models. Normal Mask: Like previous Anothers, a mask with a mecha design is also included. The eyes are movable and the line of sight can be adjusted. It can also be attached to characters from the Sousai Shojo Teien series. *The naked face parts and normal mask are not compatible with Ao Gennai or Bukiko Kotobuki. EXARMOR WHITE COMMANDER: Like Ruby Eye, this model also has a cosplay-style exarmor outfit. The head sculpt is an inverse design of Valiant's. Her hat is removable and has 3mm connection points. The clear blue visor attached to the head gear is removable. The receiver unit extending from the side of her head has two modes: active mode and passive mode. With six pieces of armor on the front, back, left, and right that can be adjusted individually, the miniskirt armor allows for aggressive action poses. The sleeve armor can be taken off and swapped out with shackles. Two Types of Whips: Inspired by the concept of a strict instructor, the weapons included in this kit are a short whip and a long whip. The long whip is made from a lead wire attached to a grip, which makes it possible to coil and attach it to mounting parts. Articulation Features: The best feature of this series is the approximately 50 points of articulation throughout the body. The six pieces of the miniskirt armor can be moved individually, allowing the model to be posed in a wide variety of actions, from quiet poses like kneeling or sitting cross-legged to high kicks and poses with weapons. Included Items: Vanguard Leader Model x1 Naked Face x1 Eye Adjustment Tool x1 Normal Mask x1 Short Whip x1 Long Whip x1 Long Whip Attachment Parts x1 Shackles x2 Standard Wrist Joint and Spacer x1 (Left and Right) Single-Piece Rear Armor x1 Expansion Skin Parts Skin Color A x1 Set

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G DESIRE MAIDEN RAIDER EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device DESIRE MAIDEN RAIDER. The set includes decals of eye colors and expressions not in the original kit, allowing for a variety of new expressions and looks. The decals can also be used on Megami Device models other than Desire Maiden Raider as well. *This product is a decal set for Megami Device. Model not included."

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU MAO EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device PUNI?MOFU MAO....

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU TU EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device PUNI?MOFU TU....

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU YUKI TU EYE DECAL SET!"Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models.The decals are compatible with Megami Device PUNI?MOFU YUKI TU.The set includes decals of eye colors and expressions not in the original kit, allowing for a variety of new expressions and looks.The decals can also be used on Megami Device models other than Yuki Tu as well.*This product is a decal set for Megami Device. Model not included."

"A new original series of base models comes to Megami Device, the plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor! B1R-M Chassis Kit Skin Color B joins the lineup!! This model is a remake of the Block1 standard body, designed by Masaki Apsy for the early Megami models. It has been reborn as a simple chassis kit with improved mobility, proportions, and ease of assembly while also maintaining as much compatibility as possible with past characters in the series. The face parts on this model have movable eyes recreated via printing, a first for Megami Device models. These face parts can also be swapped with Block2's standard faces and hair from models like the Buster Dolls. The body comes in two different types: the concept color and full-body skin color. These two configurations allow modelers to customize the color scheme and use the model as parts for other purposes in a wide range of ways. Model Specifications: - This kit includes runners for the bodies in both the concept color and full-body skin color B. - In addition to the face with printed movable eyes, an unpainted face with blank movable eyes compatible with decals is included. - The chest, abdomen, waist, and toe sections include both detailed and less detailed parts, allowing modelers to customize the level of detail they want in the model. - The helmet allows the model's expression to be visible or not. - Shoulder blades have been included for more compatibility. The chests from existing Megami Device models (prior to the Buster Doll series) can be swapped in by replacing the default shoulder blades. - Includes a back armament hanger with a 3mm compatible connector allowing existing parts to be attached, a tool resembling an electric screwdriver for adjusting the eyes, and a stand for one-legged poses. What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"

"A new original series of base models comes to Megami Device, the plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor! B1R-M Chassis Kit Skin Color B joins the lineup!! This model is a remake of the Block1 standard body, designed by Masaki Apsy for the early Megami models. It has been reborn as a simple chassis kit with improved mobility, proportions, and ease of assembly while also maintaining as much compatibility as possible with past characters in the series. The face parts on this model have movable eyes recreated via printing, a first for Megami Device models. These face parts can also be swapped with Block2's standard faces and hair from models like the Buster Dolls. The body comes in two different types: the concept color and full-body skin color. These two configurations allow modelers to customize the color scheme and use the model as parts for other purposes in a wide range of ways. Model Specifications: - This kit includes runners for the bodies in both the concept color and full-body skin color B. - In addition to the face with printed movable eyes, an unpainted face with blank movable eyes compatible with decals is included. - The chest, abdomen, waist, and toe sections include both detailed and less detailed parts, allowing modelers to customize the level of detail they want in the model. - The helmet allows the model's expression to be visible or not. - Shoulder blades have been included for more compatibility. The chests from existing Megami Device models (prior to the Buster Doll series) can be swapped in by replacing the default shoulder blades. - Includes a back armament hanger with a 3mm compatible connector allowing existing parts to be attached, a tool resembling an electric screwdriver for adjusting the eyes, and a stand for one-legged poses. What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"

"Introducing ASRA ARCHER, a new model from Megami Device, a plastic model kit series combining bishoujo-style beauties and heavy-duty weapons and armor! Megami Device is a plastic model kit series where users can enjoy equipping weapons and armor to articulated bishoujo-style beauties. The "machinika" body designed by Masaki Apsy allows users to create more dynamic and beautiful poses with this model. The design for this model was handled by Nidy-2D-! Model Specifications: - Includes three pre-painted face parts. - The model can be displayed as an archer-themed "Armed Mode," or without armor for "Unarmed Mode." - This model can be combined with armor from ASRA Ninja. Recreate and equip a longsword to display ""Samurai Mode."" - The "machinika" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down. - This model kit includes various weapon parts such as a longbow and longsword to recreate various combat scenes. - The 3mm connection points on each part allow this model to be customized with parts from the M.S.G, Frame Arms, and Frame Arms Girl series. - The kit includes five sets of PVC hands that are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series. - The kit includes decals for the eyes and other markings. (This item is a reproduction.) What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machinika," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!" Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"ASRA ARCHER AOI is the latest entry in the Megami Device series, which masterfully combines beautiful girls and mechs. Megami Device is a series of plastic model kits that allow you to assemble your own fully poseable model and equip her with weapons and armor. Megami Devices utilize a main body known as a "machinika" designed by Masaki Apsy, which are then customized by a range of guest designers. This time's designer is Nidy-2D! Model Specifications:- The hair parts for this color variant of ASRA ARCHER are made using a new mold and a new color of plastic.- The kit includes bare arm and leg parts.- The character model is made with a new color scheme, and the weapon blades are made with clear pink plastic.- The model comes with three pre-painted face parts.- The parts can be configured to display the model in her archer-inspired armor for "Armed Mode," or without her armor for "Unarmed Mode."- You can display the model in the special "Samurai Mode" by using parts from the previously released ASRA NINJA model kit.- The "Machinika" body base boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses.- The kit includes a variety of weapons, including a sword and longbow, allowing you to recreate different battle scenes.- The model is equipped with several 3mm connection points, making it compatible with existing M.S.G, Frame Arms, and Frame Arms Girl weapons and armor.- The kit includes 5 sets of PVC hands that are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series.- The model kit includes new decals for the eyes and body markings.(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

Introducing ASRA NINE-TAILS MATSURI, the latest model from Megami Device, a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor!NINE-TAILS changes from the M.S.G-clad form to a new version adorned in beautiful traditional Japanese clothing.Returning to the series as ASRA NINE-TAILS MATSURI, this model kit features major adjustments to the proportions that bring the immensely popular ASRA series in line with the AUV series.Inspired by Japanese summer festivals, the model dons a mini Japanese yukata comprised of entirely new parts. The new accessories of fox ears, a tail, and a fan with feathers add to the festive feeling of the kit.Includes updated ASRA series connection parts for the new proportions. These parts allow for the armaments in the ASRA NINE-TAILS kit (sold separately) to be equipped.This model was designed by Nidy-2D-, the designer of the ASRA series!The "machineca Block1.5L" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:·The model features mature proportions and detailed coloring thanks to its greater volume and intricate part separation.·Includes a shikigami, blade-style shikigami, and fan-style shikigami. Recreate festival scenes with these items.·The expressions are newly designed by Nidy-2D- and recreated by Amaai. Includes two pre-painted face parts and one face part used with decals.·The kit is compatible with ASRA NINE-TAILS and ASRA TAMAMONOMAE. Mix and match parts to customize the model.·The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.·The kit includes a variety of weapons and joint parts that can be used to create different combat scenes.·The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts.·Includes decals for the eyes and markings.What is "Megami Device?"Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles.Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

""Megami Device" is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor. The latest character to join the series is ASRA NINJA AOI!Megami Device is a series of plastic model kits that allow you to assemble your own fully poseable model and equip her with weapons and armor.The models utilize a main body known as a "machinika" designed by Masaki Apsy. And the design for this model was handled by Nidy-2D-!Model Specifications:·The newly designed hair parts were created using new molds and the standard hair parts are included in a new color scheme.· The model kit includes bare arm and leg parts.· The character model is made with a new color scheme, and the weapon blades are made with clear pink plastic.· The model kit includes new decals for the eyes and body markings.·The model comes with three pre-painted face parts.·The parts can be configured to display the model in her ninja-inspired armor for "Armed Mode," or without her armor for "Unarmed Mode."·This model has a feature where the armor parts can be combined with ASRA ARCHER to create "Samurai Mode".·The "machinika" body base boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses.·The model kit includes a variety of weapons, including ninja stars, kunai, and a katana, allowing users to recreate different battle scenes.· The model is equipped with several 3mm connection points, making it compatible with existing M.S.G, Frame Arms, and Frame Arms Girl weapons and armor.·The kit includes 5 sets of PVC hands that are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series.Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

""Megami Device" is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor. The latest character to join the series is ASRA NINJA AOI!Megami Device is a series of plastic model kits that allow you to assemble your own fully poseable model and equip her with weapons and armor.The models utilize a main body known as a "machinika" designed by Masaki Apsy. And the design for this model was handled by Nidy-2D-!Model Specifications:- The newly designed hair parts were created using new molds and the standard hair parts are included in a new color scheme.- The model kit includes bare arm and leg parts.- The character model is made with a new color scheme, and the weapon blades are made with clear pink plastic.- The model kit includes new decals for the eyes and body markings.- The model comes with three pre-painted face parts.- The parts can be configured to display the model in her ninja-inspired armor for "Armed Mode," or without her armor for "Unarmed Mode."- This model has a feature where the armor parts can be combined with ASRA ARCHER to create "Samurai Mode".- The "machinika" body base boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses.- The model kit includes a variety of weapons, including ninja stars, kunai, and a katana, allowing users to recreate different battle scenes.- The model is equipped with several 3mm connection points, making it compatible with existing M.S.G, Frame Arms, and Frame Arms Girl weapons and armor.- The kit includes 5 sets of PVC hands that are compatible with weapons from the M.S.G, Frame Arms, and Frame Arms Girl series.(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

""Megami Device" is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor. Each character has a main body, or "machinika," designed by Masaki Apsy along with a huge array of interchangeable parts to outfit her as you like! The latest character to join this series is ASRA NINJA designed by Nidy-2D- in a new color variant with new decals included! The M.S.G Japanese Sword in a new color scheme is also included with this model. Model Specifications: ·Newly designed marking and eye decals are included. The marking decals are of a special gold color. ·3 different pre-painted face parts per character. ·Interchangeable "Armed Mode" and "Unarmed Mode" parts. ·Use with SOL Road Runner (sold separately) to create full armor mode. ·The base body can be articulated, allowing for more natural posing options (such as when posing with weapons or when sitting down). ·Various bonus weapon parts are included. ·The model is equipped with several 3mm connection points, making it compatible with existing M.S.G, Frame Arms, and Frame Arms Girl weapons and armor. ·PVC made hand parts (5 per hand) are included which are compatible with M.S.G, Frame Arms, and Frame Arms Girl series. What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5 ½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machinika," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series! (This item is a reproduction.)"

"Introducing a new model from the Megami Device series, a plastic model kit series combining bishoujo-style beauties and heavy-duty weapons and armor. The latest character to join the series is Amaterasu's first variation kit, AUV AMATERASU ECLIPSE!Based on the Japanese legend of Amano-Iwato, this...

"The latest model to join Megami Device is a variation of Susanowo Regalia, AUV AME NO UZUME SUNSHINE!Based on Ame-no-Uzume from the Japanese legend of Amano-Iwato, the popular AUV Amaterasu Regalia kit features a color scheme that portrays a dancer.The elegant black and purple base colors are reimagined to a yellow and white color scheme that symbolizes radiant sunlight.The newly designed face shows off a bright and hearty smile. The torso has also been changed to reveal more skin for a more seductive look.The skin features a new color, Skin Color E, for a healthy and active appearance.Megami Device is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor.This model was designed by Nidy-2D-, the creator of the ASRA and AUV series!The ""machineca"" body designed by Masaki Apsy allows for beautiful and dynamic poses.Model Specifications:- The model comes with three newly designed pre-painted face parts: Smiling, dancing, and singing.- The torso features more exposed skin.- Comes in the new Skin Color E.- The parts for the signature weapons and large cape draped over the legs can be reconfigured to create a wide variety of forms for users to enjoy.- The parts can be configured to display the model in full armor for "Armed Mode," or without armor for "Unarmed Mode."- This kit is highly compatible with M.S.G DRESS UP PARTS CUTE RIBBON SET SKY BLUE Ver. (sold separately) and can be used as an official additional part.- The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as holding a weapon at the ready or sitting down.- The kit includes a variety of weapons and joint parts that can be used to create different combat scenes.- The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, and Arcanadea series parts.- Includes decals for the eyes and other markings.What is "Megami Device?"Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.