Kotobukiya

"The Medarot made for true champions, ARC BEETLE DASH, finally joins the model kit lineup!This model comes with a variety of features to recreate the silhouette from the original Medarot series, as well as the most impressive feature-the ability to Medachange into Mighty Reckless Mode!The standard parts of the series are also included, such as the dialogue sheet and stand parts, as well as the detachable medal for the back.The distinctive feature in the game where parts can be swapped out is even recreated in the kit. Fans can rearrange and replace parts with models in the same series to customize their very own Medarot.The kit comes with two pre-painted and one unpainted clear green face visor part, allowing the user to recreate their preferred situation.The multi-colored kit design allows the user to recreate a finish close to Arc Beetle Dash in the series just by assembling the kit."

The original Medarot, Metal Beetle comes as a plastic model kit, loaded with parts and features! Joining Kotobukiya's Medarot series as the second entry, is the character synonymous with the Medarot series: Metal Beetle! This model comes with a variety of features to recreate the silhouette from the original Medarot series, including 4 visors with different expressions, shooting effect parts, and dialogue plates. Parts can be recombined with other models in Kotobukiya's Medarot series. The multi-colored design allows the user to recreate Metal Beetle's heroic in-game appearance just by assembling the kit. (This item is a reproduction.) Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Head Scissors, one of the most popular Medarots of all time, is the third entry in the Medarot model kit series! In addition to faithfully recreating the silhouettes of each Medapart, Head Scissors' right arm Chanbara Sword and left arm Picopeco Hammer are both spring-loaded. The kit is packed with other features that set it apart from regular Kotobukiya model kits as well, including two types of antennae, dialogue plates, and a Medarot medal. Just like in the games, the model's Medaparts are also compatible with other kits in the series. Simply assemble to create a unique and new Medarot! Includes four pre-painted visors for various situations. The kit is also pre-painted in series-accurate colors, so simply build and enjoy recreating scenes from the show and games! (This item is a reproduction.) " Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

Introducing an all-new mage-inspired Metamorphose unit!This kit is a stand-alone color variant of the Exarmor that is included with Necro Face.Exarmor Sorceress:This armor features hooded headgear and a removable skull mask.The base mask behind the skull mask has three eyes, with the third eye sculpted into the forehead. The eyes are movable, and the included tool can be used to adjust the line of sight. The mask can be swapped out for face parts of other female-type Megalomaria and Sousai Shojo Teien characters.The unarmored visor can also be replaced with bangs parts from Sousai Shojo Teien characters. Even with the hood equipped, some characters' bangs parts can be attached. The bangs parts from Madoka Yuki, Emma Koishikawa, Koyomi Takanashi, Eimi Nijimura, and Short Wig can be equipped.*Not compatible with Ao Gennai and Bukiko Kotobuki's face and bangs parts.The four extended artificial limbs on the back are movable, and can be extended and retracted.The base is a 4mm ball joint, making it possible to attach female Megalomaria arms to create a six-armed character.The skirt-like pieces of armor are connected with ball joints and have multiple points of articulation, allowing for a wide range of dynamic poses.The extended artificial arms can also be removed and used as a mage's familiar.Expansion Skin Parts:The expansion skin parts, which received a large response after they were first announced, have also been included to increase compatibility with female-body type plastic model kit series, such as Sousai Shojo Teien.The parts use the pale Skin Color C, which matches well with Sousai Shojo Teien's Kuon Yakushiji [Maria Kagaribi Costume].Coloring:The unit features parts in five colors.Red (Fuma model color), gold, light grey (Principal model color), clear orange (Ninja Fox color) and pale flesh (Skin Color C).Included Items:Exarmor Sorceress x1 SetExpansion Skin Parts Skin Color C ×1 Set

"Metamorphose Unit is a series of option sets that expand the possibilities of the Megalomaria series.White Eagle is a set that combines the bird themed exarmor units such as the wings and beak, the Japanese themed fan and staff, and the expansion skin parts that can be attached to Sousai Shojo Teien models.Exarmor White Eagle:The Exarmor parts are designed to fit Megalomaria female-body style models.The clear parts designed after a beak can be removed from the visor. The voluminous wings can be flexibly positioned using the large three-point wrist joint, allowing for extravagant action poses.The talons attached to the ankle parts are also movable and can be changed to Hunting Mode. Part of the geta can also be changed to create High Geta Mode.The unit is molded in light gray, black, and clear orange.* The light gray is the same as that used for Principal's armor.Expansion Skin Parts:The neck, shoulders, and hip joint parts are expansion parts in Skin Color A that can be used to customize certain areas with an uncovered design.The neck features a carefully sculpted collarbone that is highly compatible with the heads of the Sousai Shojo Teien models.The set includes two types of base parts for attaching the head: Type A (for Sousai Shojo Teien) and Type B (for Megami Device.)It also includes two types of neck ball joints: f5mm (compatible with Megalomaria, Sousai Shojo Teien, Arcanadea, and Frame Arms Girl) and f6mm (compatible with Megami Device).Thanks to the structure of the neck ball joint that allows it to slide backwards and forwards, and the axial rotation inherent to ball joints, a variety of flexible posing can be enjoyed using the multiple articulation features.The shoulder and hip joints are designed without the mecha details of the exterior. The hip joint has a pull-out structure that boasts a high range of movement and can be used as uncovered parts.It includes two types of hip joints: Type A (for Megalomaria female-body style models) and Type B for (Sousai Shojo Teien models.)*For Type B, please note that due to space limitations there are some characters it is not compatible with.Included Items:- 1 x Exarmor White Eagle Set - 1 x Expansion Skin Parts Set"

"Introducing an expressive hand unit for male-body type characters that enhances the acting ability of the marionnette style! *The molding color is black to match Zirconia and Ghillie Dhu. This product is not part of the TOKYO Mark brand. 5mm Holding Hand: This part can hold thick pipes of around 5mm and is great for recreating scenes where the arm or leg of an enemy is held, such as when using a throw. Fighter Stance Hands: This is an essential part for striking powerful poses, such as a fighter's stance when they open their hands. It is also possible to recreate action scenes like grabbing the opponent's face or gathering power. Palm Strike Hands: Recommended for strikes that are somewhat different from punches! Also great for releasing gathered energy in one deadly move. Open Hands: These hands can fit snugly against flat surfaces, and allow for poses like being summoned, having hands pressed against a wall, and even handstands. Thumbs Up: This part is recommended for gestures typical of hot-blooded heroes. Hand Seal: A recommended part to give any look a lot of character, such as for ninjas or onymouji. Supporting Hands: A powerful part perfect for quiet scenes such as lifting something or gently caressing a person's face. Recommended for poses when interacting with the Sousai Shoujo girls! Grabbing Hands: While not quite a tight grip, this part is recommended when grabbing onto something. Use it in such scenes as grabbing onto objects thicker than a weapon handle, such as a character's arm. Included Items: Eight Types of Hand Parts (Left and Right) 5mm Holding Hand, Fighter Stance Hands, Palm Strike Hands, Open Hands, Thumbs Up, Hand Seal, Supporting Hands, and Grabbing Hands"

"The ninth release in the Megalomaria series is a character designed with the concept of a princess knight in mind. Along with the newly sculpted head and armor parts, this deluxe kit comes equipped with EXPANSION ARMOR Type E Dress Ver. and a VIRTUOUS STYLE SWORD featuring an exclusive color scheme. Newly Sculpted Parts: - Head (Tiara, Ribbon, Headgear, Visor, Base) - Armor (Shoulders, Knees, Ankles) - Skirt Armor Attachment Coloring: The coloring is based on Sousai Shojo Teien's Ritsuka Saeki, and uses the uniform color of St. Iris Gakuen Girls' High School as the armor color. A total of 10 different colors are used. Articulation Features: Like Principal, this kit features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent enough to allow the model to sit with one knee up. The knee armor can move independently and can be adjusted to various desired positions. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The Exarmor is inspired by a long apron dress and has 13 points of articulation. Each point has 3mm joints, meaning that they are highly versatile as parts for customization. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Combining the model with weapon units sold separately can turn the arms themselves into weapons, recreating a monster-like appearance. The normal wrist joints and spacer can be used freely to one's preference. Hands: Seven types of hands are included and consist of hands designed for holding swords and guns as well as knife-hand strike hands and multiple open hands. Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Green Glass. Included Items: - 1 x Green Glass Model- 1 x EXPANSION ARMOR Type E Dress Ver. Set - 1 x Bastard Sword (with Scabbard) Set - 1 x Longsword (with Scabbard) Set - 1 x Two Types of Sword Attachments - 1 x Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Point compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"The eighth character in the Megalomaria Unlimited Universe series is Fuma, a ninja-inspired character that leverages the wide range of movement of the marionnette style. This is a deluxe kit that comes with various items such as a sword, claws, shuriken, kunai, and a scarf. Exarmor Ninja Fox: Along with the eye-catching fox mask, the model comes with a headgear decorated with animal ears and a flashy scarf that can be attached using the ball joint at the base to allow for various expressions. The scarf can also be removed. The three claws on the three-point wrist joints can be articulated independently, enhancing the fun when creating expressive action poses. The sword can be attached to the back of the waist using a mount attachment. Articulation Features: This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. The head and neck joints are newly sculpted, and removing the cover on the side of the head reveals a 3mm joint for customization. In addition, the range of motion of the head has been increased thanks to the structure of the neck ball joint that slides both backwards and forwards. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. The separately sold MEGALOMARIA M.S.G EX HAND UNIT [Female Type A] can be used to further expand the range of posing options. By using the open hand, the model can even perform a handstand! Compatibility of Heads and Masks: The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so it can be used interchangeably. The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet. *Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Fuma. By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts. Included Items: - 1 x Fuma Model - 1 x Scarf - 1 x Detail Cover for Display Without Scarf - 1 x Seven Types of Hand Parts - 1 x Sword - 1 x Sword Attachment Part - 2 x Shuriken - 2 x Kunai - 2 x Shuriken/Kunai Attachment Part - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"Introducing Grin Doll, a goblin-type Another fit for anything from comical to serious roles.This character was designed to fit the grunt position for users who want villains to match their heroes.The model features a newly designed head, arm armor, and three new weapons.Head:The head features a mask with an evil grin befitting the name Grin Doll. The head can be assembled with or without teeth.The unique long nose can also be removed to give the character a wholly different atmosphere. It also still features the ability to equip Sousai Shojo Teien face and bang parts.*Parts from Ao Gennai and Bukiko Kotobuki cannot be equipped as they use unique standards.Weapons:The kit includes a club, axe and machete. When displaying multiple models, equipping different weapons can give each character their own personality.The axe and machete can be equipped to the hard points around the body using the included 3mm connection joints.Articulation Features:The model features approximately 50 points of articulation throughout the body.The marionnette-style body means that it can be displayed in a wide range of poses, from serious to comical. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up.The shoulders are composed of multiple joints, allowing them to be pulled forward and the arms to be crossed.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances.The torso part also has an excellent range of motion, allowing the figure to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away.The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses.The figure has an incredible range of poses, from high kicks to sitting curled up.For the rear armor, there is also a single-piece version that isn't separated into left and right for whatever poses you can imagine.Included Items:- 1 x Grin Doll Model - 1 x Seven Types of Hand Parts- 1 x Club - 1 x Axe - 1 x Machete - 1 x Standard Wrist Joint and Spacer (Left and Right)- 2 x 3mm Joint - 1 x Single-Piece Rear Armor

"The sixth character in the MEGALOMARIA UNLIMITED UNIVERSE series is Mephisto, the much anticipated first male-body style character.Boasting an impressive 54 points of articulation, the model stands 180mm tall.Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses.The knee armor can move independently and can be adjusted to the desired position.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward.Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons.The normal wrist joints and spacer can be used freely to one's preference.Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands.Color Scheme:The model uses six colors; dark red, black, clear red, light gray, clear blue (partially translucent), and gold (partially translucent). Included Items:- 1 x Mephisto Model - 1 x Wrist Blades (Left and Right)- 1 x Seven Types of Hand Parts- 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"By popular demand from many users, the tenth MEGALOMARIA character is a prototype color version Mephisto. Color Scheme: The model uses three colors, HEXA black, HEXA grey, and clear turquoise green, a combination designed to match well with both M.S.G and HEXA GEAR. Articulation Features: Mephisto has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Mephisto features larger joints than female-body style characters, such as Principal, allowing Mephisto to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords, holding guns as well as clenched fists and multiple open hands. Included Items: - 1 x Mephisto Model - 1 x Wrist Blades (Left and Right) - Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

Introducing an all-new Grim Reaper-inspired boss character, Necro Face!Necro Face is a DX item equipped with the Curse Reaper (scythe) and Exarmor Necromancer armor.Exarmor Necromancer:This armor features hooded headgear and a removable skull mask.The base mask behind the skull mask has three eyes, with the third eye sculpted into the forehead. The eyes are movable, and the included tool or the end tip of the Curse Reaper (scythe) can be used to adjust the line of sight. The mask can be swapped out for face parts of other female-type Megalomaria and Sousai Shojo Teien characters.The unarmored visor can also be replaced with bangs parts from Sousai Shojo Teien characters. Even with the hood equipped, some characters' bangs parts can be attached. The bangs parts from Madoka Yuki, Emma Koishikawa, Koyomi Takanashi, Eimi Nijimura, and Short Wig can be equipped.*Not compatible with Ao Gennai and Bukiko Kotobuki's face and bangs parts.The four extended artificial limbs on the back are movable, and can be extended and retracted.The base is a 4mm ball joint, making it possible to attach female Megalomaria arms to create a six-armed character.The skirt-like pieces of armor are connected with ball joints and have multiple points of articulation, allowing for a wide range of dynamic poses.The extended artificial arms can also be removed and used as a mage's familiar.Curse Reaper:The Curse Reaper is a large weapon designed after the Grim Reaper's scythe. The blade is made with clear plastic and can be replaced to change its base Curse Reaper (scythe) form to the Magic Staff (staff) form.The bottom tip is + shaped and can be used to move the eyes of Necro Face's mask.Expansion Skin Parts:The expansion skin parts, which received a large response after they were first announced, have also been included to increase compatibility with female-body type plastic model kit series, such as Sousai Shojo Teien.The parts use the pale Skin Color C, which matches well with Sousai Shojo Teien's Kuon Yakushiji [Maria Kagaribi Costume].Articulation Features:The model features approximately 50 points of articulation throughout the body. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up.The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances.The torso part also has an excellent range of motion, allowing the figure to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away.The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible.The right and left hip joints can move independently in all four directions, with extensive forward movement allowing users to recreate an incredible range of poses from sitting with legs crossed to high kicks to sitting curled up.For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely.Three-point Wrist Joints:The wrists are designed to bend inwards almost 180 degrees which allows the hard point to be brought forward. The Hysteria Blades included with Seeker and Grin Doll (sold separately) can be attached to the wrist armor.Included Items:Necro Face Model x1Skull Mask x1Seven Types of Hand PartsCurse Reaper (Scythe) x1Magic Staff Clear Parts x1Standard Wrist Joint and Spacer x1 (Left and Right)Single-Piece Rear Armor x1Expansion Skin Parts Skin Color C ×1 Set

"To make the heroes shine even more, the second vehicle-type item is here! A reliable partner for the Triggers who hunt Anothers, this is a large volume kit with a total length of approximately 248mm. The heavy two-wheeler Night Czar is a variation item made by changing up some of the design and coloring of Nights Superior. While it was designed to allow the larger Mephisto and Ghillie Dhu (height approx. 180mm) to ride, female body type Anothers (height approx. 160mm) can also ride it, so please enjoy the various combinations.Changes from Nights Superior- The front unit has been changed from one designed for Ghillie Dhu to a general-purpose design.- A license plate has been added to the rear of the bike.- The main color has been changed from Ghillie Dhu's black to Seeker's white.The exterior part uses 3 mm connections and the HEXA G-R.A.M system, allowing for easy removal and combination with other series.*This product is not part of the TOKYO Mark brand."

"Target Bloodless has been successfully restrained and its abilities removed." Valiant, an Another based on the concept of a police officer, is the first model from TOKYO Mark with tampography printed face parts, movable eyes, and an unmasked naked face part! The skin and eye parts are each painted. The well-received expansion skin parts are also included and can be combined with Sousai Shojo Teien models for more customization. Naked Face Part: This is the first kit in the series with movable eyes and a painted face. The eyes can be adjusted to look different ways using the included tool. Since the head is attached in the same way as other normal mask types, this model is compatible with Sousai Shojo Teien models. Normal Mask: Like previous Anothers, a mask with a mecha design is also included. The eyes are movable and the line of sight can be adjusted. It can also be attached to characters from the Sousai Shojo Teien series. *The naked face parts and normal mask are not compatible with Ao Gennai or Bukiko Kotobuki. EXARMOR VALIANT POLICE: Like Ruby Eye, this model also has a cosplay-style exarmor outfit. Her hat is removable and has 3mm connection points. The clear red visor attached to the head gear is removable. The receiver unit extending from the side of her head has two modes: active mode and passive mode. With six pieces of armor on the front, back, left, and right that can be adjusted individually, the miniskirt armor allows for aggressive action poses. The sleeve armor can be taken off and swapped out with shackles. The optional chain can connect the handcuffs and the large handcuff-shaped blades. Handcuff-Shaped Blades: Isolator Firewall The main weapon is based on a large pair of handcuffs. These handcuffs are a slashing weapon that can also serve as a restraining tool, sealing a criminal's special abilities. They can be linked together using the optional chain. Articulation Features: The best feature of this series is the approximately 50 points of articulation throughout the body. The six pieces of the miniskirt armor can be moved individually, allowing the model to be posed in a wide variety of actions, from quiet poses like kneeling or sitting cross-legged to high kicks and poses with weapons. Included Items: Valiant Model ×1 Naked Face ×1 Eye Adjustment Tool ×1 Normal Mask ×1 Isolator Firewall (Handcuff-Shaped Blade) ×2 Red Baton ×1 Taskill (Gun) ×1 Holster ×1 Back Mount Rack ×1 Optional Chain (255mm) ×1 Shackles x2 Standard Wrist Joint and Spacer x1 (Left and Right) Single-Piece Rear Armor x1 Expansion Skin Parts Skin Color A ×1 Set

"The eleventh character in the Megalomaria Unlimited Universe series is Zekuu! Designed with the concept of a tengu in mind, Zekuu joins Fuma as a character with a Japanese theme.The wings, fan, and staff option parts come together to give this deluxe item a distinctive silhouette. The mask includes the same movable eye feature as Principal, with an adjustable line of sight. The eyes can be adjusted in any direction using the handle of the included fan.Exarmor Black Crow:The clear parts designed after a beak can be removed from the visor. The voluminous wings can be flexibly positioned using the large three-point wrist joint, allowing for extravagant action poses.The talons attached to the ankle parts are also movable and can be changed to Hunting Mode. Part of the geta can also be changed to create High Geta Mode.Articulation Features:This model shares the same base model as the first character, Principal, and features approximately 50 points of articulation throughout the body. Including the Exarmor, there are more than 70 points of articulation. The knee joint is comprised of a single layer of joints, allowing the model to sit with one knee up, its legs crossed, and various other action poses.The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose.The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed staff stances.The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The right and left hip joints can move independently in all four directions, with extensive forward movement allowing users to recreate an incredible range of poses from high kicks to sitting curled up.For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely.Compatibility of Heads and Masks:The head features multiple layers that can be removed. The visor has the same design as the bangs of Sousai Shojo Teien models, so they can be used interchangeably.The mask is also compatible with Sousai Shojo Teien face parts allowing characters to wear the mask or helmet.The eyes can look in all directions and be adjusted by using the handle of the included fan.*Regarding visor/mask compatibility: Sousai Shojo Teien's Ao Gennai and Bukiko Kotobuki use unique standards so they are not compatible with Zekuu.By removing the cover on the side of the head, it can be used as a hard point for customization. The hard point has a 3mm connection point in the middle of the 5mm ball joint so that users can stylize it by attaching different parts.Included Items:- 1 x Zekuu Model - 1 x Seven Types of Hand Parts- 1 x Wings (Left and Right)- 1 x Staff - 1 x Fan - 1 x Standard Wrist Joint and Spacer (Left and Right)- 1 x Single-Piece Rear Armor

"The series' first male-body style character with a bare face joins the lineup! Zirconia is a character designed based on the image of a male-body type Seeker. Despite its simple armaments, it's a design that allows the marionnette style's action gimmicks to be fully enjoyed. Life-like Head Part: The newly sculpted parts are newly designed by Kodama, with the head part in particular being carefully crafted down to the hair as in the Sousai Shojo Teien series. The pre-painted face part, Naked Face, comes with movable eyes, and the included tool can be used to change the line of sight in accordance with various action poses. *The face part uses a unique design, and is not compatible with Mephisto or Ghillie Dhu. Articulation Features: Zirconia has approximately 54 points of articulation throughout the body. The knee joint, with a new shin articulation, is comprised of a single layer of joints and can be bent inward enough to allow the model to sit in seiza, with its legs folded underneath. New toe articulation also allows for more aggressive poses. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. Large Arm Blade: The base of the Arm Blade can be rotated, allowing the blade to be pointed forwards. The connection joints are 3mm in diameter, allowing the blade to be attached to other characters. Three-point Wrist Joints: The wrists are designed to bend inwards almost 180 degrees which allow the hard point to be brought forward. Zirconia features larger joints than female-body style characters, such as Principal, allowing Zirconia to hold larger, more powerful weapons. The normal wrist joints and spacer can be used freely to one's preference. Hands: The kit includes seven types of hands. These include hands designed for holding swords and hands for holding guns as well as clenched fists and multiple open hands. Color Scheme: The model uses eight colors: off-white, white, light gray, gray, stone gray, black, and clear black. Included Items: - 1 x Zirconia Model - 1 x Arm Blade - 1 x Seven Types of Hand Parts - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Standard Wrist Joint and Spacer (Left and Right) - 1 x Single-Piece Rear Armor

"Your neighbor might be an Emulator. A mysterious Another that imitates the appearance of a Trigger joins the lineup. New Expansion Skin Parts: The included New Expansion Skin Parts are an updated version of the Expansion Skin Parts designed to allow female-body style Anothers to be combined with models with non-mechanical bodies more easily. While Principal is used as the base kit, over 50% of the model has been converted to use skin parts, including parts such as the joints and exterior. The pale Skin Color C was used, which matches well with Kuon Yakushiji. A version without the armor details on the shoulder blades is included. Naked Face Part: This kit has movable eyes and a painted face. The face part uses tampography and the eyes use UV printing, meaning a near-perfect finish can be achieved with assembly alone. The eyes can be adjusted to look different ways using the included tool. Hime Cut Pony Tail: From Sousai Shoujo Teien comes the ARRANGE WIG HIME CUT PONY TAIL in a new color. The color used is the same as Wolf's hair and Valiant's visor and helmet parts, so they can be freely combined as well. *This kit includes only a non-mechanical head part. Articulation Features: Despite the change in appearance, the approximately 50 points of articulation throughout the body remain unchanged. The knee joint is comprised of a single layer of joints and can be bent inward enough to allow the model to sit with one knee up. The knee armor can move independently and can be adjusted to the desired position. The shoulders are composed of multiple joints, and they can be pulled forward to recreate a crossed arms pose. The range of movement around the shoulders also supports a wide range of poses, such as dynamic full body action poses and two-handed sword stances. The torso part also has an excellent range of motion, allowing the model to be posed lying down. The neck can move in all directions, allowing for poses where the head is turned away. The elbows have a deep bend that makes charming poses such as putting a hand on the cheek possible. The right and left hip joints can move independently in all four directions, allowing users to recreate stretching and split poses. The model has an incredible range of poses that can be displayed, from high kicks to sitting curled up. For the rear armor, there is also a single-piece version that is not separated into left and right parts that can be used freely. Hands: The kit includes seven types of hands. These include hands designed for holding swords and hands for holding guns as well as clenched fists and multiple open hands. Compatibility of Head and Naked Face Parts: The Naked Face is compatible with female-body style Anothers' masks and Sousai Shojo Teien face parts. Additionally, the bangs are compatible with the visor parts from female Anothers and the bangs from Sousai Shojo Teien models, allowing for a combination of non-mechanical and mecha designs. The neck's ball joint is 5 mm in diameter and can be combined with other series, and a 6 mm ball joint can be used for combinations with Megami Device head parts. Samurai Master Sword: An original color Samurai Sword is included as a weapon. Included Items: - 1 x Emulator Model - 1 x Naked Face - 1 x Seven Types of Hand Parts (Left and Right) - 1 x Three-point Wrist Joints and Wrist Armor (Left and Right) - 1 x Hip Armor with 3mm Connection Joint compatible with Flying Base - 1 x Single-Piece Rear Armor - 1 x Shoulder Blade Joint Parts (Without Armor Details, Left and Right) - 1 x Samurai Master Sword

Vanguard Leader is a Valiant variation kit based on the concept of a commanding officer or an instructor. This kit comes with two types of face parts, a mecha-style normal mask and naked face parts. Users can mix and match to create their preferred style. Naked Face Parts: This kit has movable eyes and a painted face. The eyes can be adjusted to look different ways using the included tool. Since the head is attached in the same way as other normal mask types, this model is compatible with Sousai Shojo Teien models. Normal Mask: Like previous Anothers, a mask with a mecha design is also included. The eyes are movable and the line of sight can be adjusted. It can also be attached to characters from the Sousai Shojo Teien series. *The naked face parts and normal mask are not compatible with Ao Gennai or Bukiko Kotobuki. EXARMOR WHITE COMMANDER: Like Ruby Eye, this model also has a cosplay-style exarmor outfit. The head sculpt is an inverse design of Valiant's. Her hat is removable and has 3mm connection points. The clear blue visor attached to the head gear is removable. The receiver unit extending from the side of her head has two modes: active mode and passive mode. With six pieces of armor on the front, back, left, and right that can be adjusted individually, the miniskirt armor allows for aggressive action poses. The sleeve armor can be taken off and swapped out with shackles. Two Types of Whips: Inspired by the concept of a strict instructor, the weapons included in this kit are a short whip and a long whip. The long whip is made from a lead wire attached to a grip, which makes it possible to coil and attach it to mounting parts. Articulation Features: The best feature of this series is the approximately 50 points of articulation throughout the body. The six pieces of the miniskirt armor can be moved individually, allowing the model to be posed in a wide variety of actions, from quiet poses like kneeling or sitting cross-legged to high kicks and poses with weapons. Included Items: Vanguard Leader Model x1 Naked Face x1 Eye Adjustment Tool x1 Normal Mask x1 Short Whip x1 Long Whip x1 Long Whip Attachment Parts x1 Shackles x2 Standard Wrist Joint and Spacer x1 (Left and Right) Single-Piece Rear Armor x1 Expansion Skin Parts Skin Color A x1 Set

DESIRE MAIDEN MEDIC is the latest model to join Megami Device, a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor! This is a new series by creators who developed Megami Device and is compatible with Block2 bodies. It is the collaborative work of Amaai, who worked on the character design and is known for their long service on eye decals, and Task, who oversaw planning and the mechanical design of the BUSTER DOLL series. The second unit, Medic, is a nurse-like Megami Device that features a cap for the head and ampoules. Her delicate, long twintails hair style is perfect for compassionate, expressive characters. Clear molded glasses are included. Enjoy Megami Device even further with plenty of new variations thanks to these new designers. Model Specifications: - Includes a plethora of parts themed after a valiant nurse such as giant wings with clear parts and a medical rifle that fires ampoule-shaped bullets. - Includes molded clear glasses, a first in the Megami Device series. - Includes a selection of fashionable parts compatible with the Block2 body, such as a leather-style costume and long boots. - The long twintails can be swapped out with braided hair loop parts for intense action poses. - Includes three new pre-painted face parts illustrated by Amaai. - Mix and match different parts to enjoy a variety of silhouettes, including the pure, unmodified proportions of "Unarmed Mode" and the fully equipped "Armed Mode." - The "machineca" base body boasts an impressive range of flexibility, allowing it to be displayed in a variety of natural poses, such as a weapon at the ready or sitting down. - The kit includes a variety of weapons and joint parts which allow for different combat scenes to be recreated. - A special base is included. - The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts. What is "Megami Device?" Kotobukiya's Megami Device series is a line of 14 cm (5½") plastic model kits that come with a range of weapons and equipment that allow you to enjoy building and customizing your own Megami Device to use in robot battles. Each character has a main body, or "machineca," designed by Masaki Apsy, while the models' unique armor and mechanics are designed in collaboration with a variety of guest illustrators. The kits come with multi-colored parts and face parts pre-printed with tampography, making them easy to assemble with no paint required. The kits are equipped with 3mm joints, making them compatible with all of the weapons in the Megami Device line as well as Kotobukiya's other plastic model kit series!"

"Megami Device meets the HONDA Motocompo! From Megami Device, a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor, Buster Doll Knight hops on Aoshima Bunka Kyozai's 1/12 Honda AB12 Motocompo '81 model in a special collaboration! Model Specifications: - Includes a 1/12 Honda AB12 Motocompo '81, exclusively colored for this product by Aoshima Bunka Kyozai. - The Motocompo tire parts are newly designed. - Comes with an all-new helmet part. - Buster Doll Knight is reimagined as Alice in a vivid sky blue and white color scheme. - The eyes are also recolored to match the new color scheme. One pre-painted face part is included. - The rosy skin tone Skin Color B is used. - The Machineca Block2-M body is used, a base body which was created with both ease of assembly and beauty in mind. - All three hands are plastic. The weapon-holding hand is shaped to hold both round and square grips, and weapons can be held simply by inserting them. - A special base is included which provides improved support for display. - The 3mm connection points on each part and head compatibility parts allow this model to be customized with existing M.S.G, Frame Arms, Frame Arms Girl, Hexa Gear, Sousai Shojo Teien, Arcanadea, and Megalomaria series parts. *Adhesives are required to assemble a portion of the 1/12 Honda AB12 Motocompo '81. The Buster Doll series, the next-generation of Megami Device models built with the Machineca Block2-M body, pairs up with Aoshima Bunka Kyozai's 1/12 Honda AB12 Motocompo '81 model kit in one complete package! With improved proportions and design, the Buster Doll series introduces a new body that is both easy to build and display. The addition of the Motocompo model creates even more ways to have fun!"

The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G DESIRE MAIDEN MEDIC EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device DESIRE MAIDEN MEDIC. The set includes decals of eye colors and expressions not in the original kit, allowing for a variety of new expressions and looks. The decals can also be used on Megami Device models other than Desire Maiden Medic as well. *This product is a decal set for Megami Device. Model not included."

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G DESIRE MAIDEN RAIDER EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device DESIRE MAIDEN RAIDER. The set includes decals of eye colors and expressions not in the original kit, allowing for a variety of new expressions and looks. The decals can also be used on Megami Device models other than Desire Maiden Raider as well. *This product is a decal set for Megami Device. Model not included."

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU MAO EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device PUNI?MOFU MAO....

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU GIN LANG EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device PUNI?MOFU GIN LANG. The set includes decals of eye colors and expressions not in the original kit, allowing for a model with a variety of new expressions and looks. The decals can also be used on Megami Device models other than Gin Lang as well. *This product is a decal set for Megami Device. Model not included."

"The support series for Megami Device is expanded upon with the latest addition, MEGAMI DEVICE M.S.G PUNI?MOFU TU EYE DECAL SET! "Megami Device M.S.G" is a modeling support goods series compatible with Megami Device models. The decals are compatible with Megami Device PUNI?MOFU TU....