Horror

It has been almost twenty years since Alien vs. Predator, also known as AVP, was released and blessed fans of both Aliens and Predators franchises, pitting the creatures against each other in an action-packed, sci-fi horror film. Prime 1 Studio is excited to the next entry to the Predators grand family, joining the Museum Masterline Series, the 1/3 Scale MMPR-05S Celtic Predator Bonus Version from the 2004 film Alien vs. Predator! In this incredible crossover blockbuster, Celtic, along with his brothers Scar and Chopper, were all sent to Earth to undertake an initiation Hunt in an ancient pyramid buried beneath Antarctica. The pyramid served as a hunting ground, where Predators used Aliens as prey in order to graduate from Young Blood Yautjas to a Blooded Yautja, thus being considered an adult and a full member of its Clan. Let us take a closer look at Celtic, the eldest of the three brothers. As you have seen with the announcement of the first brother of the trio, we continue to strive for excellence at Prime 1 Studio. For the second brother, the incredible artists have no reason to hold back and have once again left no stone unturned in bringing the ruthless Celtic - the oldest and biggest of the three. At over 37 inches tall, Celtic is distinguishable by his nightmarish Bio-Mask, which was molded around his mandibles. Like the rest of the hunting party, he, too, is fully geared from head to toe, equipped with an arsenal of advanced technology and deadly weaponry. Both fists can be clenched or open, additionally the right hand can be displayed holding the Combistick, a spear-like weapon that serves to impale its victims from a distance whereas the gauntlet-integrated Wristblade, in its retracted state is designed for close-quarter combat, allowing him to slice through flesh and bone with brutal efficiency. Swappable parts allow the Wristblades and the Combistick allow you to display the blades at different lengths of extension and states. The base features corpses and bones of fallen enemies accompanied by two, silver and black "AVP" logo plates to display at the statue's base. When you order the Bonus Version from our official store or any authorized distributor, limited only to 150pcs in the world, you will receive an additional undamaged Bio-Mask to expand your storytelling with this fearsome Yautja. This imposing statue is the culmination of dedication from our artists and sculptors, and it is sure to make any Predator fans proud. Don't miss out and pre-order the brutish MMPR-05S 1/3 Scale Celtic Predator Bonus Version now and expand your collection, while quantities last! This one naturally pairs well with his brother Scar, and of course, be on the lookout for the last brother, Chopper, in the near future! Product Specifications: - Statue Size approximately 37.4 inches tall [H:95cm W:73cm D:88cm] - AVP themed-base - Three (3) Swappable right-hand parts (Clenched fist, Combistick and open palm) - Two (2) Swappable left-hand parts (Clenched fist and open palm) - Four (4) Swappable Wristblades (Retracted, Partially extended, Fully Extended and Reverse) - Two (2) Swappable Combistick (Retracted and Extended) - Two (2) Title Plaque (Silver and Black) - One (1) Swappable Undamaged Bio-Mask [BONUS PART] Limited Edition of 150 pcs worldwide.

"The enemy of my enemy is my friend..." - Alexa Woods, to Scar It has been almost twenty years since Alien vs. Predator, also known as AVP, was released and blessed both Aliens and Predators franchise fans, pitting the creatures against each other in an action-packed, sci-fi horror film. Prime 1 Studio is excited to present our next entry to the Predators grand family, joining the Museum Masterline Series, the 1/3 Scale MMPR-04 Scar Predator from the 2004 film Alien vs. Predator! In this incredible crossover blockbuster, Scar and his brothers Celtic and Chopper were all sent to Earth to undertake an initiation Hunt in an ancient pyramid buried beneath Antarctica. The pyramid served as a hunting ground, where Predators used Aliens as prey in order to graduate from Young Blood Yautjas to Blooded Yautja, thus being considered an adult and a full member of its Clan. Let us look closer at Scar Predator, the youngest of the three Predator brothers. Once again, the incredible artisans at Prime 1 Studio brought their A-game to bring this imposing and fearsome extraterrestrial hunter to life. At a whopping 36 inches tall, Scar is fully armored and equipped with an arsenal of advanced technology and brutal instruments of death. As usual, the immense dedication and attention to detail from our artisans and sculptors that went into crafting this remarkable Predator statue ensures the utmost level of accuracy. From each single strand of dreadlock to the tiny Xenomorph skulls and the shading of the skin and armor. You will definitely see and feel our commitment to perfection with this piece! The iconic Bio-Mask, features a distinctive mark on the forehead, referring to his name "Scar". The Plasmacaster is ready to unleash its devastating energy blasts on any prey that's unlucky enough to be targeted by the helmet's targeting lasers, both of which are LED illuminated a bright blue and red, respectively. He holds in his right hand the Combistick, a spear-like weapon that serves to impale victims from a distance. In contrast, the gauntlet-integrated Wristblade, in its retracted state, is designed for close-quarters combat, allowing him to slice through flesh and bone with brutal efficiency. His left hand is equipped with a massive Shuriken, absolutely lethal when thrown. The Wrist Gauntlet is also equipped with LED illuminating functions. The base features ancient Yautja-constructed ruins and the corpse of a Facehugger that has been freshly slain. We have also included a second head, without the Bio-Mask, to display Scar's true face and a head base for display. A silver "AVP" logo plate is also included for display at the statue's base. Pre-order this massive and fearsome MMPR-04 1/3 Scale Scar Predator now and expand your collection while quantities last! And stay on the lookout for his two brothers, Celtic and Chopper, in the very near future. Product Specifications: - Statue Size approximately 36 inches tall [H:93cm W:85cm D:91cm] - Yautja-constructed pyramid themed-base - Two (2) Swappable head parts - One (1) Movable Headstand - One (1) Title Plaque - LED illumination on Helmet-mounted Targeting Laser, Wrist Control Panel & Shoulder-mounted Plasmacaster

"The enemy of my enemy is my friend..." - Alexa Woods, to Scar It has been almost twenty years since Alien vs. Predator, also known as AVP, was released and blessed both Aliens and Predators franchise fans, pitting the creatures against each other in an action-packed, sci-fi horror film. Prime 1 Studio is excited to present our next entry to the Predators grand family, joining the Museum Masterline Series, the 1/3 Scale MMPR-04DXS Scar Predator Deluxe Bonus Version from the 2004 film Alien vs. Predator! In this incredible crossover blockbuster, Scar and his brothers Celtic and Chopper were all sent to Earth to undertake an initiation Hunt in an ancient pyramid buried beneath Antarctica. The pyramid served as a hunting ground, where Predators used Aliens as prey in order to graduate from Young Blood Yautjas to Blooded Yautja, thus being considered an adult and a full member of its Clan. Let us look closer at Scar, the youngest of the three Predator brothers. Once again, the incredible artisans at Prime 1 Studio brought their A-game to bring this imposing and fearsome extraterrestrial hunter to life. At a whopping 36 inches tall, Scar is fully armored and equipped with an arsenal of advanced technology and brutal instruments of death. As usual, the immense dedication and attention to detail from our artisans and sculptors that went into crafting this remarkable Predator statue ensures the utmost level of accuracy. From each single strand of dreadlock to the tiny Xenomorph skulls and the shading of the skin and armor. You will definitely see and feel our commitment to perfection with this piece! The iconic Bio-Mask, features a distinctive mark on the forehead, referring to his name "Scar". The Plasmacaster is ready to unleash its devastating energy blasts on any prey that's unlucky enough to be targeted by the helmet's targeting lasers, both of which are LED illuminated a bright blue and red, respectively. He holds in his right hand the Combistick, a spear-like weapon that serves to impale victims from a distance. In contrast, the gauntlet-integrated Wristblade, in its retracted state, is designed for close-quarters combat, allowing him to slice through flesh and bone with brutal efficiency. His left hand is equipped with a massive Shuriken, absolutely lethal when thrown. The Wrist Gauntlet is also equipped with LED illuminating functions. The base features ancient Yautja-constructed ruins and the corpse of a Facehugger that has been freshly slain. We have also included a second head, without the Bio-Mask to display Scar's true face, and a head base for display. A silver "AVP" logo plate is also included for display at the statue's base. The Deluxe Version will allow you to mix and match a series of additional hand parts to find the perfect display to your liking. Two additional right-hand parts are included, one closed fist and one open palm. Two additional Wristblade lengths for the right gauntlet allow you to either fully or partially extend the deadly blades. The left hand comes with two additional open palm variations and an additional third head part featuring Scar's visage as he roars. A second headstand and logo plates are included for you to display. And when you order the Deluxe Bonus version from our official store or any authorized distributor, you will receive additional parts to expand your storytelling: an additional Bio-Mask head part without the scar on the forehead, an additional right hand holding a ripped-out Inner mouth of a Xenomorph, an additional left hand holding an ornamental Dagger, as well as an alien finger and facehugger finger that can be attached to the belt. Limited to only 300pcs worldwide, pre-order this massive and fearsome 1/3 Scale MMPR-04DXS Scar Predator Deluxe Bonus Version now and expand your collection while quantities last! And stay on the lookout for his two brothers, Celtic and Chopper in the very near future. Product Specifications: - Statue Size approximately 36 inches tall [H:93cm W:85cm D:91cm] - Statue Size approximately 36 inches tall [H:93cm W:85cm D:76cm] (Extended Wristblade) - Yautja-constructed pyramid themed-base - Three (3) Swappable head parts (Bio-Mask, Unmasked Classic Portrait, Unmasked Roaring Portrait) - Three(3) Swappable right-hand parts (Combistick, clenched fist, open palm) - Three(3) Swappable left-hand parts (Shuriken, clawing palm, open palm) - Three(3) Wristblades (Retracted, Partially Extended and Fully Extended) - Two (2) Movable Headstand - Two (2) Title Plaques - LED illumination on Helmet-mounted Targeting Laser, Wrist Control Panel & Shoulder-mounted Plasmacaster - One (1) Swappable Bonus Head Part (Bio-Mark with no marking) [BONUS PART] - One (1) Swappable Bonus right-hand part (Holding Inner mouth)[BONUS PART] - One (1) Swappable Bonus left-hand part (Ornamental Dagger)[BONUS PART] - One (1) Alien Finger and Facehugger Finger [BONUS PART]

The Pop! Vinyl figure comes in a displayable window box! It stands approx. 9 cm tall.

Horror fans first met Annabelle in the sleeper hit THE CONJURING. Then she wowed fans with her star turn in ANNABELLE as she dug her cold plastic hands into their hearts. From her sinister grin to the malevolent gleam in her dead eyes, no detail has been overlooked. Mezco's award-winning design team has captured every nuance of Annabelle's frightening visage. Mezco's Annabelle doll stands eighteen inches tall and features rotocast head, hands, and feet. Her torso, legs, and arms are screen-accurate plush. With her film matched clothing and rooted hair you will swear she stepped right out of the silver screen! Annabelle, the sinister conduit to the damned, comes complete in a collector-friendly window box that may help keep the malevolent entity the cultists conjured contained...then again, it may not.

This is a PVC Figure from Numskull, based on the The Evil Dead license. The figure depicts the character Ash.

This is a PVC Figure from Numskull, based on the The Evil Dead license. The figure depicts the character Ash.

This is a PVC Figure from Numskull, based on the The Evil Dead license. The figure depicts the character Ash.

"What did you do, Ray?" Premium Collectibles Studio presents the Ghostbusters: Stay Puft Marshmallow Man Diorama. This lovable destroyer of the known universe will make an excellent addition to any Ghostbusters fans collection. Depicting Mr. Stay Puft lumbering down the streets of New York after being manifested by the villainous Gozer, this awe-inspiring collectible stands nearly 29" tall and recreates the exciting finale from the smash hit 1984 film. Stay Puft's vibrant white and blue deco offers a stark contrast to the aging skyscrapers that frame him, this combined with the affable grin on his face makes for a comically outlandish scene. The buildings around Stay Puft are packed with detail and, combined with the miniature cars and street lights at his feet, offer a tremendous sense of scale to this one-of-a-kind collectible. Choose the form of the destructor and add the Ghostbusters: Stay Puft Marshmallow Man Diorama by PCS to your collection today! Limited to 400 pieces

"What did you do, Ray?"Premium Collectibles Studio presents the Ghostbusters: Stay Puft Marshmallow Man Diorama. This lovable destroyer of the known universe will make an excellent addition to any Ghostbusters fans collection.Depicting Mr. Stay Puft lumbering down the streets of New York after being manifested by the villainous Gozer, this awe-inspiring collectible stands nearly 29" tall and recreates the exciting finale from the smash hit 1984 film.Stay Puft's vibrant white and blue deco offers a stark contrast to the aging skyscrapers that frame him, this combined with the affable grin on his face makes for a comically outlandish scene. The buildings around Stay Puft are packed with detail and, combined with the miniature cars and street lights at his feet, offer a tremendous sense of scale to this one-of-a-kind collectible.The Deluxe Edition also includes 2 swap-out portraits giving collectors the option to display the Stay Puft Marshmallow Man that best suits their mood.Choose the form of the destructor and add the Ghostbusters: Stay Puft Marshmallow Man Diorama by PCS to your collection today!Limited to 200 pieces

- High Quality Pencil Case - Officially licensed - Measurements: 7 x 7 x 17 cm - Material: Silicone

Officially licensed calendar measuring 13 x 13 x 23 cm. The calendar consists of 5 blocks with days and months that can be swapped and combined to create all possible dates. Material: Resin

Printed Backpack and Tote Bag. Exterior side pockets. Material: Polyester / Faux Leather Size: 30 x 35 x 11 cm

What's this? What's this? It's a 30 cm tall, illuminated ceramic Christmas tree from Ukonic, featuring Jack Skellington from Tim Burton's The Nightmare Before Christmas.

Requires 3 x AAA batteries (not included).

Pop open a frightfully fun surprise with this Pocket Popper! Inside a coffin is a small Pocket POP! figure, ready to appear at the push of a button! The figure stands approx. 4 cm tall (6 cm with the coffin).

Pop open a frightfully fun surprise with this Pocket Popper! Inside a coffin is a small Pocket POP! figure, ready to appear at the push of a button! The figure stands approx. 4 cm tall (6 cm with the coffin).

Pop open a frightfully fun surprise with this Pocket Popper! Inside a coffin is a small Pocket POP! figure, ready to appear at the push of a button! The figure stands approx. 4 cm tall (6 cm with the coffin).

Officially licensed lanyard with card holder.

Cable Guys are designed to hold and charge gamepads, smart phones and much more. It stands approx. 21 cm tall.

Officially licensed lanyard with Pouch Card Holder.

Officially licensed lanyard with Pouch Passport Holder

The Nightmare Before Christmas x Chibi Design x Piggy Bank Beast Kingdom presents the Vinyl Piggy Bank series, turning The Nightmare Before Christmas favorite Jack Skellington into an adorable, palm-size piggy bank that blends spooky charm with everyday practicality. **Jack Skellington** The Pumpkin King appears in his iconic black-and-white suit, featuring a chibi seated pose, signature skull head, and mischievous smile—cute, elegant, and unmistakably Jack. **Features:** - Smooth to the touch with a coin slot on top. - Character from The Nightmare Before Christmas presented in adorable chibi style. - Palm-sized functional decorative figurine. - Decorative and functional. Bring Jack home and let a little Halloween Town magic guard your savings.

The Nightmare Before Christmas x Chibi Design x Piggy Bank Beast Kingdom presents the Vinyl Piggy Bank series, turning The Nightmare Before Christmas favorite Zero into an adorable, palm-size piggy bank that blends spooky charm with everyday practicality. **Zero** Jack’s loyal ghost dog arrives in classic white form, complete with a red collar and pumpkin nose. His round silhouette and gentle expression add a warm, whimsical touch. **Features:** - Smooth to the touch with a coin slot on top. - Character from The Nightmare Before Christmas presented in adorable chibi style. - Palm-sized functional decorative figurine. - Decorative and functional. Bring Zero home and let a little Halloween Town magic guard your savings.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

- A5 notebook (14.8 × 21 cm)
- 0.5 mm polypropylene cover and Wire-O binding
- Includes 4 0.5 mm polypropylene dividers with top tabs
- 80 sheets (160 pages) of 80 gsm paper with a custom-printed interior

Officially licensed PVC keychain from Pyramid from the Nightmare before Christmas license with the Jack design.