Collectibles

The world of POP! is getting bigger-and smaller-with Bitty POP! collectibles! Expand your collection with Bitty POP! Bitty Arcade! Bitty POP! figure is packaged in a hard acrylic display case with a detachable bottom lid. The detachable bottom lid doubles as an acrylic base, to which the Bitty POP! figure is adhered. Remove Bitty POP! from his case so he can take his place in the Bitty POP! Arcade Display! Vinyl figures are approximately 2.3 cm and 8.7 cm tall.

Your favourite Pops! have been shrunk into Bitty Pops! Expand your collection with this assortment of Bitty Pop! figures featuring your most beloved cartoon characters! The figures are approx. 2.5 cm tall. They come with a protective cover made of clear acrylic in a window box.

From Funko's 'Bitty POP!' series comes this pack of 2 mini POP! figures made of vinyl. Each is approx. 2 cm tall and comes with its own acrylic packaging in the usual POP! design.

From Funko's 'Bitty POP!' series comes this pack of 2 mini POP! figures made of vinyl. Each is approx. 2 cm tall and comes with its own acrylic packaging in the usual POP! design.

Your favourite Pops! have been shrunk into Bitty Pops! Expand your collection with this assortment of Bitty Pop! figures featuring your most beloved cartoon characters! Each 4-pack comes with one rare or hyper rare mystery Bitty Pop! to complete the series. Bitty Pops! are packaged in hard acrylic cases with detachable bottom lids. Detachable bottom lids double as acrylic bases, to which the Bitty Pop! figures are adhered.

The world of POP! is getting bigger-and smaller-with Bitty POP! collectibles! There's a 1 in 6 chance you may find the chase. Chase variant is not guaranteed. Bitty POP! figures are packaged in hard acrylic cases with detachable bottom lids. The detachable bottom lids double as acrylic bases, to which the Bitty POP! figures are adhered. Sort and arrange your Bitty POP! collectibles with the included display case! Acrylic display cases are stackable and hold four Bitty POP! figures each. Vinyl figures are approximately 0.9 in (2.3 cm) tall. Four figures per single package purchase.

The world of POP! is getting bigger-and smaller-with Bitty POP! collectibles! There's a 1 in 6 chance you may find the chase. Chase variant is not guaranteed. Bitty POP! figures are packaged in hard acrylic cases with detachable bottom lids. The detachable bottom lids double as acrylic bases, to which the Bitty POP! figures are adhered. Sort and arrange your Bitty POP! collectibles with the included display case! Acrylic display cases are stackable and hold four Bitty POP! figures each. Vinyl figures are approximately 0.9 in (2.3 cm) tall. Four figures per single package purchase.

Jurassic Park Digger is a card game that will immerse you in to the exciting world of paleontology. Collect and combine dinosaur DNA, creating a unique Jurassic Park. The competition is fierce, being the goal to revive as many dinosaur species as possible. Description: - This competitive card game is for 2 to 4 players aged 8 and up - The goal of the game is to collect 5 different dinosaur tokens- Jurassic Park is waiting for youAge: +8 Game Duration: 20-30 minutes Language: English, French, German and Spanish

The formidable Tyrannosaurus Rex from the Jurassic Park franchise is brought to life in this finely sculpted diorama.The case can be removed and the dinosaur is also removable from base. The diorama measures approximately 7 inches tall.Collect all 3 dinosaurs - Tyrannosaurus Rex, Velociraptor and Dilophosaurus!

- Officially licensed diecast model from `Jurassic Park´ - Jada Toys - Scale: 1/18 - Packaging: Window box

From Funko's popular 'POP!' series comes this vinyl figure. Each figure stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this vinyl figure. Each figure stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this vinyl figure. Each figure stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this vinyl figure. Each figure stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this vinyl figure. Each figure stands approx. 9 cm tall and comes in a window box packaging.

This officially licensed statue from "Jurassic Park" is made of resin. The Icons scale statue measures approx. 17 x 19 x 27 cm.

Inspired by one of the most iconic scenes from Jurassic Park, this T-Rex from Iron Studios' Icons line recreates the intense and unforgettable moment featuring the legendary dinosaur. The Tyrannosaurus rex is portrayed with a commanding and realistic presence, capturing all the power and terror that defined the film. This collectible features highly detailed sculpting, with realistic skin texture, a fierce expression, and a themed display base inspired directly by the Jurassic Park universe, making it a standout piece for any collection.

Product Dimensions:
Height: 17.4 cm (6.85")
Width: 18.6 cm (7.32")
Depth: 26.9 cm (10.59")

A piercing cry echoes through the Isla Sorna. The ferocious Tiger Stripe Raptor, brought to life in 1/6 scale. Set on the isolated Isla Sorna, where proliferating dinosaurs bare their fangs against mankind, "The Lost World: Jurassic Park" marked the second entry in the saga directed once again by visionary Steven Spielberg. From this film, the Velociraptor now joins the Legacy Museum Collection. To call for help, Ian, Sarah, and Kelly make their way to the Isla Sorna communications center-only to be confronted by a swift and relentless predator. Captured in 1/6 scale, this statue portrays the very first raptor to emerge from the pack, glaring at Ian and unleashing a piercing cry, drawn from one of the film's most suspenseful moments. The compact yet agile physique has been sculpted with meticulous detail, from the textured skin to the taut musculature. Its signature Tiger Stripe pattern is faithfully recreated: greige tones visible along the underbelly and elsewhere are layered with orange, over which flow sleek black stripes. Vertical pupils gleam within yellow eyes, a blood-red tongue flickers in the maw, and sharp claws extend in readiness-every detail radiates primal ferocity. The specially designed base evokes the front of the communications center, with a fallen log sprawled across the scene. A shattered car-door window, corroded tires, and scattered wreckage vividly recall the raptor's showdown with Ian. Brought to life together with the film's unforgettable imagery, the ferocious Tiger Stripe Raptor captures the tension of the Isla Sorna and makes a striking addition to your collection. Product Specifications: - The Lost World: Jurassic Park -themed Base

A piercing cry echoes through the Isla Sorna. The ferocious Tiger Stripe Raptor, brought to life in 1/6 scale. Set on the isolated Isla Sorna, where proliferating dinosaurs bare their fangs against mankind, "The Lost World: Jurassic Park" marked the second entry in the saga directed once again by visionary Steven Spielberg. From this film, the Velociraptor now joins the Legacy Museum Collection. To call for help, Ian, Sarah, and Kelly make their way to the Isla Sorna communications center-only to be confronted by a swift and relentless predator. Captured in 1/6 scale, this statue portrays the very first raptor to emerge from the pack, glaring at Ian and unleashing a piercing cry, drawn from one of the film's most suspenseful moments. The compact yet agile physique has been sculpted with meticulous detail, from the textured skin to the taut musculature. Its signature Tiger Stripe pattern is faithfully recreated: greige tones visible along the underbelly and elsewhere are layered with orange, over which flow sleek black stripes. Vertical pupils gleam within yellow eyes, a blood-red tongue flickers in the maw, and sharp claws extend in readiness-every detail radiates primal ferocity. The specially designed base evokes the front of the communications center, with a fallen log sprawled across the scene. A shattered car-door window, corroded tires, and scattered wreckage vividly recall the raptor's showdown with Ian. This bonus edition includes a Fossilized Sickle Claw (Display Model), evoking the terror of a raptor's hunt as it strikes from the grass. A true collector's item. Brought to life together with the film's unforgettable imagery, the ferocious Tiger Stripe Raptor captures the tension of the Isla Sorna and makes a striking addition to your collection. Product Specifications: - The Lost World: Jurassic Park -themed Base - 1 x Fossilized Sickle Claw (Display Model) [BONUS PART]

“This is good! Here we are on the worst place on Earth, and we’re not even getting paid!” – Dr. Alan Grant Prime 1 Studio is proud to include another iconic dinosaur to our Prime Collectible Figure Series: The 1/38 Scale Spinosaurus from Jurassic Park III! In the last movie of the original Jurassic Park series, Jurassic Park III introduced a worthy contender to the dinosaur title: our almost 9.5-inch-tall Spinosaurus! Largest of all the known carnivores, this hulking predator was bigger than the T-Rex and more than a match for its ferocity! Prime 1 Studio has engaged our sculptors and painters to bring this ‘spine lizard’ to realistic life with their incredible skills and artistry. Our sculptors have taken great care to sculpt lifelike, crocodilian skin, menacing teeth, and an impressive sail into this amazing carnivore. Additionally, our painters have supplemented this excellent sculpt with the subtle hues and coloration of the Spinosaurus from the film. Most of all, this dinosaur will fit in perfectly with the Tyrannosaurus Rex and the Carnotaurus from our Prime Collectible Figures Series. Spinosaurus stands on a textured earthen base, emblazoned with Jurassic Park III’s logo, featuring the usurper himself! Spinosaurus allows you to complete the 1/38 Scale dinosaur collection! So, hurry and preorder your copy today!

Product Specifications:
- Jurassic Park III-themed base with logo

„Das ist ja toll! Wir sind hier am schlimmsten Ort der Welt, und wir werden nicht einmal dafür bezahlt!“ – Dr. Alan Grant Prime 1 Studio ist stolz darauf, einen weiteren legendären Dinosaurier in unsere Prime Collectible Figure-Reihe aufzunehmen: den Spinosaurus im Maßstab 1:38 aus „Jurassic Park III“! Im letzten Film der ursprünglichen Jurassic Park-Reihe stellte Jurassic Park III einen würdigen Anwärter auf den Dinosaurier-Titel vor: unseren fast 24 cm großen Spinosaurus! Als größter aller bekannten Fleischfresser war dieses riesige Raubtier größer als der T-Rex und stand ihm an Wildheit in nichts nach! Prime 1 Studio hat unsere Bildhauer und Maler beauftragt, diesen „Stachel-Echse“ mit ihrem unglaublichen Können und ihrer Kunstfertigkeit realistisch zum Leben zu erwecken. Unsere Bildhauer haben mit großer Sorgfalt darauf geachtet, lebensechte, krokodilartige Haut, bedrohliche Zähne und ein beeindruckendes Segel in diesen erstaunlichen Fleischfresser einzuarbeiten. Darüber hinaus haben unsere Maler diese hervorragende Skulptur mit den subtilen Farbtönen und der Färbung des Spinosaurus aus dem Film ergänzt. Vor allem passt dieser Dinosaurier perfekt zum Tyrannosaurus Rex und zum Carnotaurus aus unserer Prime Collectible Figures-Serie. Der Spinosaurus steht auf einem strukturierten Erd-Sockel, der mit dem Logo von Jurassic Park III verziert ist und den Usurpator selbst zeigt! Mit dem Spinosaurus vervollständigen Sie Ihre Dinosaurier-Sammlung im Maßstab 1:38! Beeilen Sie sich also und bestellen Sie Ihr Exemplar noch heute vor!

Produktspezifikationen:
- Sockel im Jurassic Park III-Design mit Logo“This is good! Here we are on the worst place on Earth, and we’re not even getting paid!” – Dr. Alan Grant Prime 1 Studio is proud to include another iconic dinosaur to our Prime Collectible Figure Series: The 1/38 Scale Spinosaurus from Jurassic Park III! In the last movie of the original Jurassic Park series, Jurassic Park III introduced a worthy contender to the dinosaur title: our almost 9.5-inch-tall Spinosaurus! Largest of all the known carnivores, this hulking predator was bigger than the T-Rex and more than a match for its ferocity! Prime 1 Studio has engaged our sculptors and painters to bring this ‘spine lizard’ to realistic life with their incredible skills and artistry. Our sculptors have taken great care to sculpt lifelike, crocodilian skin, menacing teeth, and an impressive sail into this amazing carnivore. Additionally, our painters have supplemented this excellent sculpt with the subtle hues and coloration of the Spinosaurus from the film. Most of all, this dinosaur will fit in perfectly with the Tyrannosaurus Rex and the Carnotaurus from our Prime Collectible Figures Series. Spinosaurus stands on a textured earthen base, emblazoned with Jurassic Park III’s logo, featuring the usurper himself! Spinosaurus allows you to complete the 1/38 Scale dinosaur collection! So, hurry and preorder your copy today!

Product Specifications:
- Jurassic Park III-themed base with logo« C'est génial ! On est ici, dans le pire endroit de la Terre, et on n'est même pas payés ! » – Dr Alan Grant Prime 1 Studio est fier d'ajouter un autre dinosaure emblématique à sa série de figurines de collection Prime : le Spinosaurus à l'échelle 1/38 issu de Jurassic Park III ! Dans le dernier film de la série originale Jurassic Park, Jurassic Park III a présenté un digne prétendant au titre de plus grand dinosaure : notre Spinosaurus de près de 24 cm de haut ! Le plus grand de tous les carnivores connus, ce prédateur imposant était plus grand que le T-Rex et n’avait rien à lui envier en matière de férocité ! Prime 1 Studio a fait appel à ses sculpteurs et peintres pour donner vie à ce « lézard à épines » de manière réaliste grâce à leur incroyable talent et leur sens artistique. Nos sculpteurs ont apporté un soin particulier à la reproduction de la peau réaliste, semblable à celle d’un crocodile, des dents menaçantes et de l’impressionnante voile de cet étonnant carnivore. De plus, nos peintres ont complété cette excellente sculpture par les nuances subtiles et la coloration du Spinosaurus tel qu’il apparaît dans le film. Mais surtout, ce dinosaure s'intégrera parfaitement aux Tyrannosaurus Rex et Carnotaurus de notre série Prime Collectible Figures. Le Spinosaurus repose sur un socle en terre texturé, orné du logo de Jurassic Park III, mettant en vedette l'usurpateur lui-même ! Le Spinosaurus vous permet de compléter votre collection de dinosaures à l'échelle 1/38 ! Alors, dépêchez-vous et précommandez votre exemplaire dès aujourd'hui !

Caractéristiques du produit :
- Socle sur le thème de Jurassic Park III avec logo«¡Esto sí que está bien! ¡Estamos en el peor lugar del mundo y ni siquiera nos pagan!» – Dr. Alan Grant ¡Prime 1 Studio se enorgullece de incorporar otro dinosaurio emblemático a nuestra serie Prime Collectible Figure: el Spinosaurus a escala 1/38 de Jurassic Park III! En la última

A crumbling aviary, ruled by winged predators. The terror of being hunted-sculpted in breathtaking detail. A boy goes missing, and a rescue mission plunges once more into the perils of Isla Sorna. From "Jurassic Park III", the third installment of the legendary franchise released in 2001, the Pteranodon joins the Legacy Museum Collection. A chilling scene unfolds in the mist-screams pierce the air as the child is snatched into a nesting ground echoing with shrill cries. Inspired by the terror Eric experienced, this 1/6 scale statue captures the world of the winged predators in stunning detail. The adult Pteranodon folds its vast wings as it watches over the nest below. The hungry juveniles push forward, mouths open in desperation. The composition evokes a powerful sense of species-driven unity, delivering the message that this is no place for humans-and that the viewer, too, is seen as prey. From the razor-sharp beak and prominent cranial crest to the sinewed texture of its back, every detail of the adult is rendered with striking realism. The wing membranes are brought to life through intricate sculptwork and a paint application rich in shadow and tone. The juveniles feature softer body proportions and thinner wings, with wide, expressive eyes that suggest both innocence and threat. The base, adorned with rusted steel frames, decayed nesting debris, and a scattered skulls, completes the scene with a heightened sense of realism. A faithful embodiment of the film's primal terror-the Pteranodon returns, for every Jurassic fan who has long awaited the threat from above. Product Specifications: - Jurassic Park III-themed Base

A crumbling aviary, ruled by winged predators. The terror of being hunted-sculpted in breathtaking detail. A boy goes missing, and a rescue mission plunges once more into the perils of Isla Sorna. From "Jurassic Park III", the third installment of the legendary franchise released in 2001, the Pteranodon joins the Legacy Museum Collection. A chilling scene unfolds in the mist-screams pierce the air as the child is snatched into a nesting ground echoing with shrill cries. Inspired by the terror Eric experienced, this 1/6 scale statue captures the world of the winged predators in stunning detail. The adult Pteranodon folds its vast wings as it watches over the nest below. The hungry juveniles push forward, mouths open in desperation. The composition evokes a powerful sense of species-driven unity, delivering the message that this is no place for humans-and that the viewer, too, is seen as prey. From the razor-sharp beak and prominent cranial crest to the sinewed texture of its back, every detail of the adult is rendered with striking realism. The wing membranes are brought to life through intricate sculptwork and a paint application rich in shadow and tone. The juveniles feature softer body proportions and thinner wings, with wide, expressive eyes that suggest both innocence and threat. The base, adorned with rusted steel frames, decayed nesting debris, and a scattered skull, completes the scene with a heightened sense of realism. This bonus version includes a special display model of a Pteranodon baby. With wings spread in a menacing pose, it recalls the moment Eric is surrounded and threatened. A must-have item that pulls the film's world even closer. A faithful embodiment of the film's primal terror-the Pteranodon returns, for every Jurassic fan who has long awaited the threat from above. Product Specifications: - Jurassic Park III-themed Base - 1 x Pteranodon Baby (Display Model) [BONUS PART]

X PLUS proudly introduces the Tyranasaurous model kit from Jurassic Park III, crafted in the standard 1/35 military scale! We capture the iconic scene where the T-Rex emerges with thunderous footsteps on a stormy night, striking fear into the hearts of the tour participants on the main road. Utilizing a unique part division that applies the outer skin to an inner body, we've recreated the T-Rex's stunning curves and intricate details in plastic. This material offers both strength and lightness, allowing us to sculpt the dinosaur in a dynamic one-legged pose-a feat that's challenging to achieve with PVC or resin. Admire the lifelike quality as you see the muscles in its raised thigh contracting and the torso tilting as it shifts its weight. You can truly appreciate the creature's biological presence. Plus, by comparing it to the Ian Malcolm figure in the same scale, you can fully grasp the immense size of the T-Rex! This product uses the same molds as the "1/35 Scale Tyrannosaurus rex Plastic Model Kit" released in July 2023.

- 55 playing cards- Officialy licenced

Cute and cuddly plush figure from Funko. It stands approx. 18 cm tall.

Cute and cuddly plush figure from Funko. It stands approx. 18 cm tall.

Cute and cuddly plush figure from Funko. It stands approx. 18 cm tall.

From Funko's popular 'POP!' series comes this vinyl mini figure. They are approx. 4 cm tall and come together on a blister card box.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.

From Funko's popular 'POP!' series comes this cool vinyl figure. It stands approx. 9 cm tall and comes in a window box packaging.