Model Kits

Product Specifications: - Attach the Large Sword with Large Cannon included in GOVERNOR ARMOR TYPE: KNIGHT Bianco (sold separately) for an even more enhanced Hexagear weapon. - The Large Cannon can be folded closed in the center. - The foregrip on the Large Cannon and Machine Gun included can be adjusted to make posing with the weapons easier. 3 mm connecting joints are also available on select points of the weapons, allowing for the weapons to be connected to the Mount Arm. - Despite the model's size of 82 mm, it has 24 joints that can be moved. - This model uses GOVERNOR ARMOR TYPE: PAWN A1 Ver.1.5 as its base. - The Mount Arm uses a flexible joint part to give the mount more design options, and allows for various parts to be attached. - The back pack part and chest parts include 3 mm connecting joints to attach the mount arm. - The head is pre-painted. Included Parts: - Large Cannon x1 - Machine Gun x1 - Mount Arm x1 - Forearm Hard Point Extender x1 - 3mm Joint x1 - Left and Right Wrist Parts (Closed, Open, Weapon Holding) - PVC HEXA G-R.A.M. x1 - Archive Card x1

Chisato Nishikigi joins the character plastic model series, PLAMATEA!From the anime "Lycoris Recoil" comes PLAMATEA Chisato Nishikigi, the very first plastic model of Chisato!- The model stands at approx. 150mm in height. The joints of the model are fully articulated.- Includes gun, remote restraint device and bag parts.- Includes action skirt parts to allow a wider range of movement for leg parts.- In addition to a pre-painted face plates, smiling face and open-mouthed face decals to change the direction of her eyes are included.- Includes water-slide eye decals for glancing eyes.- Includes interchangeable hand parts.- The various parts of model have been separated into different colored runners and pre-painted parts, making it easy to recreate the character with a simple assembly.- Articulated stand included.

Takina Inoue joins the character plastic model series, PLAMATEA!From the anime "Lycoris Recoil" comes PLAMATEA Takina Inoue, the very first plastic model of Takina!- The model stands at approx. 150mm in height. The joints of the model are fully articulated.- Includes gun, remote restraint device and bag parts.- Includes action skirt parts to allow a wider range of movement for leg parts.- In addition to a pre-painted face plates, smiling face and serious face decals to change the direction of her eyes are included.- Includes water-slide eye decals for glancing eyes.- Includes interchangeable hand parts.- The various parts of model have been separated into different colored runners and pre-painted parts, making it easy to recreate the character with a simple assembly.- Articulated stand included.

A statue of Kali, Goddess of Death, stands guard over countless treasure. Woe to any sailor who tries to steal from the horde guarded by this stone sentry. Her six arms all wield swords and can fight off multiple attackers. One of Ray Harryhausen's more ambitious stop-motion creations, Kali would move all her arms as she battles the adventurers.** This is a model kit which is required glue assembly and painting. The images shown are reference only.

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 2 x LR60 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 2 x LR927 battery (included).

"The ARMORED CORE V Variable Infinity series finally kicks into gear!Making its much-awaited debut from the PlayStation® 3 and Xbox 360® game ARMORED CORE V, AGNI features precise detailing that gives the kit a suitable weightiness. The model can equip four massive weapons on either its hands or shoulders. Each weapon has two modes: the HARICOT SC61 Sniper Cannon turns into the ERBSEN SC62 and the KO-2H6/STREKOZA Battle Rifle turns into the KO-2H4/PODENKA.In addition, by swapping parts it is possible to change the leg size between the ULG-11 RAINIER medium legs and the ULG-10/L light legs.The arms can also be changed between the UAM-10/R and UAM-10/L by swapping the shoulders and forearms.The firing position taken when shooting the sniper cannon can also be recreated.At the same 1/72 scale as many military models, this kit is perfect for displaying with military model kits such as tanks.A dedicated display base is also included that allows for stable posing even when equipped with large weapons.*The parts in this kit are only compatible with other models in the ARMORED CORE V Variable Infinity series.(This item is a reproduction.)"

"From ARMORED CORE for Answer, GA's best NEXT, FEEDBACK, joins the fray.The model features a color exclusive to Feedback that further highlights its solid and sturdy design.The old-fashioned bazooka arms and leg stabilizers, characteristic of this AC, are also redesigned and included.This kit further widens the range of assembly options available in the AC V.I. series.The kit can be enjoyed on its own, but when combined with the V.I. series, users can create their own Armored Cores.(This item is a reproduction.)"

Model Specifications:- This model kit is an exclusive variation kit from SIEG SPRINGER that features a different color scheme for the armor and includes some newly designed parts.- There are two horns to choose from: a blazing horn (clear orange version) and a ram horn (red version).- It comes with a special black flying base printed with the ""SANAT"" crest, and the optional supporting prop can be used to display the model in various ways.- By swapping out the head unit and step unit, a Governor can be mounted in front like a centaur.- The tail unit is flexible so the model can be transformed into Sprinter Mode by attaching the included effect parts. - Includes original effect parts that can be attached to the tail unit.- The model has a deployable hard point on the abdomen where various armor parts can be attached to make an original customized model.- Two types of the humerus units of the forefoot are included: one designed to be more aesthetic and the other more customizable. - The head sensor is pre-painted, allowing you to build the model close to the finished image just by assembling.- The color scheme of this model is red, gunmetal, and clear.*The red is the same color as AGNIRAGE and some other models, and the gunmetal is the frame color commonly used within the HEXA GEAR series.Included Items:- 1 x SIEG SPRINGER- 1 x Step Unit - 2 x Boost Effect Parts - 2 x Original Effect Parts - 1 x Ram Horn - 1 x Forefoot Customization Parts (left and right) - 2 x 3mm Joint Parts - 1 x Black Flying Base with the SANAT Crest - 1 x Archive Card Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Combat preparation complete. Start your engines.Model Information:ABYSS CRAWLER is a third-gen HEXA GEAR developed by the Liberty Alliance.It was developed to explore and control blocked terrain such as culverts. Unlike other third-gen HEXA GEAR, it has two Zoatex modes and is characterized by its continuous use of Zoatex.At the beginning of the war, cities were raided by unmanned HEXA GEAR called HIDESTORMs. Further investigations uncovered numerous ginormous underground tunnels and facilities from the past that were used to carry out these attacks. As such, the Liberty Alliance urgently required a full-scale survey. However, all information about the geological patterns of these underground structures barring simple outlines, was lost, and to make matters worse, the areas had already fallen into enemy hands, with MSG Valiant Force HEXA GEARS and droids roaming the tunnels.Hidestorms, with their capabilities in electronic warfare thanks to their VIC Blades and other weapons, greatly threatened the Liberty Alliance's coordination from underground by exposing communication lines, repeaters, and power lines that connected the cities. Liberty Alliance realized the need to take back the underground tunnels and hastily developed a HEXA GEAR unit with the express purpose of taking on the task.In developing the unit, the wreckage of the destroyed Hidestorm was recovered and its frame was repurposed and reused. However, as there was little prospect of reproducing the capabilities of the VIC Blade, or controlling or disabling it, the next best countermeasure was taken. The result was the creation of the Invasion Counter Shield, commonly known as ICS, equipped on the left arm of every unit. Due to a chronic shortage of parts, only a small number of these units were produced and subsequently sent into the darkness of the underground tunnels in squads. There were countless heavily contaminated underground areas due to the use of crystalline reactors categorized as Level 6 - Abyss, where even the worst of areas of the surface could hardly hold a candle to them. Abyss Crawlers waded through the sludge and grime, sometimes engaging with Hidestorms, small droids, and other unseen battles.Weapons:- ICS (Invasion Counter Shield)- Biting Scissors- Flame Thrower- Blast Recon- Head AnchorModel Specifications: - The model and armor parts are of a black coloration similar to LORD IMPULSE and BULKARMß "LUMBERJACK" making it easy to assemble without painting.- The model system can convert between "Formation 1" which emphasizes combat, and "Formation 2," which emphasizes mobility.- The effect parts for the ICS equipped to the Biting Scissors on the left arm are detachable.- The ICS effect parts are made of clear orange plastic, giving the model a unique and realistic appearance.- The Biting Scissors on the left arm can be opened and closed to create a variety of battle poses.- The secondary "Head Anchor" can be displayed in a variety of configurations.- The roll bars on the skid units on the legs can be opened and closed.- A separately sold Governor unit can be boarded onto the cockpit.Included Items: - Head Anchor Effect Part ×1- Wire ×1- Biting Scissors ICS Effect Part ×1*The biting scissors effect part can be placed on either the left or right arm.- Archive Card ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"Combat preparation complete. Start your engines.Model Information:The PARA-PAWN JUDGE HEAD is an improved design on the SENTINEL. Unlike the IGNITE, which is awarded along with a title only to those who have achieved success in battle, the Para-Pawn Judge Head is provided purely for enhancement purposes.As with the Para-Pawn Sentinel, which was copied from the first armor type developed by Liberty Alliance, PAWN, the Judge Head is also based on a previous machine, ARMOR TYPE: KNIGHT. Unlike the unit it is based on, however, the Judge Head operates as heavy infantry rather than cavalry.The Judge Head features harder armor than previous units as well as reinforced artificial muscles, giving it a substantial difference in physical strength alone over the Sentinel. However, as a downside of the improved defensive capabilities, the unit also bears an increased weight, resulting in a slight decline in mobility. Nevertheless, it is overall still a well-balanced, capable machine.The head sensor is a development of the Sentinel and it excels in weapon accuracy, however, its real offensive and defensive capabilities are demonstrated in close-quarters combat. To increase versatility, the manipulators are the same as the Sentinel but with significantly stronger joints and grip strength, giving it improved control of melee weapons over the Sentinel.The Judge Head's strength is so exceptional that a direct punch to a HEXA GEAR would rarely result in damage to the unit itself.The unit's primary weapon is The Ruler, a giant axe equipped with a HEXA G-R.A.M and dual jets. With Judge Head's powerful grip, a single propelled swing of the axe can smash through standard armor types and Para-Pawn armor with ease.Similar to the Ignite, the design of the Judge Head also takes into account the impression it makes on the public. Thus, historical texts were referenced to give it a fearless appearance in the style of medieval European armor.However, the way the unit cuts down its enemies one after the other is more akin to an executioner at the execution block, as if it is making an example of those who rebel against SANAT.Weapons:- The Ruler (Large Axe)- Mount ArmModel Specifications:- This product is a variation kit of GOVERNOR ARMOR TYPE: KNIGHT.The head, additional chest armor, large shoulder armor, and large axe are all newly designed.- Left and right parts are included for both the additional chest armor and large shoulder armor, so they can be equipped at the same time.- The main body color is the same as GOVERNOR PARA-PAWN SENTINEL.Included Items:- JUDGE HEAD Model ×1- Hand Parts (Closed, Open, Weapon Holding) × Left and Right Each- The Ruler (Large Axe) ×1- Mount Arm ×1- PVC HEXA G-R.A.M. ×1(This item is a reproduction.)"Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered.

"ARMORED CORE WEAPON UNIT 018, Large Grenade Cannon: OIGAMI, is a giant, articulated grenade launcher that can connect with the weapon slots on both sides of an AC's back.This grenade cannon measures a whopping 400mm in length, making it one of the largest weapon units in the ARMORED CORE WEAPON UNIT series.The cannon can move from stored mode to firing mode without replacing any parts. Even when folded, it's so large that it almost hides the AC itself.*As this is one of the largest kits in the AC Weapon Unit series, it is packed in a lidded box.(This item is a reproduction.)"

Max Factory's Asuka Shikinami Langley figure is back in PLAMAX form!From "Evangelion: 2.0 You Can (Not) Advance" comes a PLAMAX plastic model of Asuka Shikinami Langley, the "Second Child" and pilot of EVA Unit 02.Originally released as a PVC scale figure in 2011, each part of the original figure has been scanned individually in order to recreate the figure in plastic model form. This snap-fit plastic model kit retains the appeal of the original figure with perfectly preserved modelling. The kit can be easily assembled by anyone.The kit includes pad-printed face plates and colored runners, making for an easy-to-assemble kit. The design of the model has been carefully planned to preserve the detail of the original sculpt in plastic model form. We hope you enjoy assembling it for yourself!*Plastic model tools and adhesive are required for assembly.*Adhesives can be used for more complete, secure assembly.*Use paint appropriate for plastic models when painting.

GraviTrax has the right action pack for every level and age.GraviTrax CORE, PRO or POWER? Preferably all three, of course. But one thing at a time. First of all, we would like to introduce the three different GraviTrax lines here and answer the most frequently asked questions: Which GraviTrax products are suitable for beginners? What is the difference between GraviTrax PRO and POWER? From what age can you start having fun with GraviTrax?But back to the beginning: With GraviTrax, everything starts with - how could it be otherwise - the start. To be more precise: with a starter set. Here, you or your child, godchild, grandchild, niece or whoever else comes along, can choose from several cool starter sets from the different product lines.From here on, there is no order, rules or restrictions. You can creatively combine all GraviTrax extensions, building blocks and elements from all lines to your heart's content. Nevertheless, there are of course differences between the individual lines GraviTrax PRO, GraviTrax POWER and GraviTrax CORE.

"Paper Theater" is a paper craft kit that allows you to recreate famous scenes of various characters by assembling together laser cut paper parts. Completed Size: 15 x 10 x 4 cm

"Paper Theater" is a paper craft kit that allows you to recreate famous scenes of various characters by assembling together laser cut paper parts. Completed Size: 15 x 10 x 4 cm

"Paper Theater" is a paper craft kit that allows you to recreate famous scenes of various characters by assembling together laser cut paper parts. Completed Size: 15 x 10 x 4 cm

"Infinite possibilities await. From the popular game ARMORED CORE NEXUS, MIRAGE C01-GAEA joins the plastic model kit lineup. With Shoji Kawamori as the mechanical designer, this kit has become a faithful recreation of his unmatched stylish design.The use of poly caps allows for a wide range of motion and the multi-colored runners allow users to recreate a finish that is close to MIRAGE C01-GAEA by just assembling the model.This product is compatible with others from the V.I. series (AC, ACW, ACA, and ACH), so users can enjoy freely assembling new units far beyond the pre-conceived models.Included Items:- Main BodyWeapons:- CR-WR93RL Rifle (For Right Arm)- WL-MOONLIGHT Laser Blade (For Left Arm)- MAGORAGA Missile (For Right Back Part)- CR-WB91LGL Linear Gun (For Left Back Part)- FUNI (EXTENSION) Interlocking Missile System"

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 25 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).

Blokees presents this cool plastic model kit for "Transformers".When assembled, the figure is approx. 8 - 13 cm tall. The special thing about this figure is that it is fully articulated, just like an action figure.Requires 1 x CR927 battery (included).